Reviews
GEMMA125
Used on an 83 SEA BASSGEMMA 125.
The OEM air cleaner had deteriorated over time and the entrance from the carburetor had become hard to get into, so I had no choice but to replace it, but I was able to do it successfully with air conditioning.
It blew up well and the acceleration was good and the idling was constant, but the intake sound became much louder.
The 50 diameter is quite large for a moped motorcycle, so it interferes a little with the GEMMA125's rear fender, but it is within the range of large enough to be sturdy.
View detail
Mounted on AF24TACT
Installed on an AF24TACT STD Engine Displacement with Chamber.
Jets need adjustment. Maintenance is required frequently as the jets clog easily.
Intake noise is not so bad. (Personal Thoughts) 。
View detail
I finally changed it.
I haven't replaced it in 9 years, it did have a little bit of a buzz when I opened the Axel but not enough to cause me any complaints in my driving.
I replaced the Carburetor with this product while cleaning it, and while the Carburetor cleaning was effective, this product has virtually eliminated the squeaking.
I realized how insensitive I am and the need for Maintenance.
View detail
JB03 UNI Filter Kit from Kitaco
* About quality and texture, Black silicone inlet pipe attaches to a quality foam Uni filter for on and off road riding. Includes a mounting bracket for the IAT sensor but no filter or attachment for the crank case breather hose. * About the feeling of use, Not the most impressive looking open air intake kit available for the JB03 model Monkey 125 but the compact design, included foam filter and pricing are perfect. * Products to buy together, An air filter for the crank case breather hose is needed to complete the installation of this kit correctly or this hose will remain unfiltered. * Difficulty of installation, To install the Uni filter kit you will need to remove the OEM airbox which has many fasteners to locate and remove but once that is complete you just need to slip on the inlet pipe and Uni filter, then install the mounting bracket for the IAT sensor followed by the sensor itself and connect the extension harness. The process was completed in 40 minutes with no difficultly. * Cost performance and comparison with other products, The Kitaco Uni filter kit has to be the best value for money open air intake kit for the JB03 model Monkey 125. Other brands offer what I consider to be a more impressive looking open air intake kit but around 3 times the price. * About shipping and packaging, I am happy to wait 6 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, If you aren't interested in this filter kit due to the styling then checkout the ones on offer from WirusWin. Use the product reviews to assist in making a decision on your purchase. View detail
Managed to install on MikuniVM 22
The VM 22 Power Filter from another manufacturer rusted quickly, so I managed to install a KITACO one, which I had used previously and enjoyed, with a larger diameter.
All-weather is still appreciated.
View detail
After installation
Impressions after installation
At speeds of 30-40kph, the intake noise is pleasant, but
It's honestly too loud when I open it all the way ^_^.
If you're not careful in residential areas, your gaze will be cold.
I got caught in a passing rain while riding, but with the all-weather Filter, I felt safe.
View detail
![[Repair/Optional Parts] UNI Filter Kit](https://img.webike-cdn.net/catalogue/images/73439/a_1_TS.jpg)
Grom Power Filtering
It is for MONKEY125, but it is installed on Grom.
It can be installed without any problem, but in the case of Grom
Since OEMAir cleaner has Cowl stopper
When this product is attached, Cowl stopper will be lost!
But Cowl can be installed.
The underside of the cowl is a little plump.
It will run on a pontoon, but it will run.
Low revs, scarcity, poor Axel adhesion.
I think Sub computer is necessary.
Blizzard Hose in UNiPipe hole with Hose joint
The intake sensor is installed in the appropriate place.
Binding in Hemp palm, etc. is Large sturdy.
View detail
VM20carburetor's standard Air Filter
I bought this for my VM20carburetor.
I chose this product because the Manufacturer's Air Filter that came with my car was falling apart.
The deciding factor in the purchase
I bought this Air Filter because it is the standard Air Filter for the Vfor M20 and has a high rating of imprecations.
The price is also cheap, so it is easy to make a new one, which was also a deciding factor.
[Impressions of using it]
To be honest, I didn't feel much of a difference as I am almost an amateur when it comes to carburetor setting.
It may be the effect of Brushboo, but I am satisfied with it because there is no particular problem.
Products compared
I compared it with KIJIMA and Othersφ43mm diameter Air Filter.
I bought this product because it was inexpensive and had good reviews in the impre...
【Review】
I was not able to feel a clear difference for me, but I am satisfied with the low price and no problem in performance.
Also, I was a little worried about the delivery date because it was a product that had been on the market for quite some time and I had to order it, but it arrived in a few days without any problems.
View detail
I bought it to add some color as well.
I installed it on a normal cab.
It's all-weather, so you don't have to worry about rainy days! That doesn't mean it's not a good idea, but it's a lot safer than bare bones.
It was easy to install, and it runs normally without any trouble, although I didn't adjust the settings.
Since it has a color type cover, it also serves as a little bit of color for the body of the car.
View detail
no problem
This is the condition of FrameGT50 (374/375) EngineMR50 (3t2). It's a little bit forced, but it can be attached without Frame modification.
Some people may notice a little more intake noise than the OEM Air cleaner.
View detail
The smoke is very different from the OEM air cleaner
I installed it on KITACO 63cc Bore up car with BW039;S50 sa53j 。 It was originally ridden with OEM Product Air Cleaner BOX processing, but the 9000 I installed it 。 I took it off immediately because of the intake sound up more than I expected, but I left it for several months.. We have reworked the OEMAir cleaner box and put it in the box! 。 The intake sound is not so noisy and the suction sound was improved 。 (It's almost useless if you don't increase the number of Air Cleaner Box Ducts, too, KN DuctQuantity:(2pc has been added) Because it is attached after all removing the Case of the side, the Plate of the attached intake volume adjustment But I'm satisfied with the result because there was no need to worry about rainy weather and the intake noise was made quiet 。 After that, I used i-map to adjust the fuel balance and it was clear that the extension of the high RPMs was improved I felt that the speed was reduced, but when I looked at Meter, the speed of the Engine was good It felt like a light turn! View detail
It breathes air
I'm using it on my SEA BASSGEMMA 125
Because it's a 1984 motorcycle, things are going bad here and there and OEM parts are in short supply It's getting to be a state of affairs
I've been using these parts for 10 years now
After all, since the intake of air becomes a lot of air, it is necessary to adjust the jet and the plug while doing the adjustment of the jet and the plug I'm doing my best because the air filter does not work
The feeling of use is that it takes in and out a considerable amount of air, and the sound of the air is quite loud when it is inhaled It's very important to consider the strength of the bracket when you install it Finally, please consider the strength of the bracket when you install it, I have been using it for about 10 years I've dropped about four of them during the
View detail
Used for Mongoli 6 v Normal Carburetor
I used it for MONKEY, GORILLAOEMCarburetor View detail
Good performance, looks good, COSPA is a good feeling
Friend's APE 50 (carburetorNORMAL) It attached to.
At 66 Plate, Normal cab and outside Exhaust System think startability and rise are also good shopping good.
I think that it is good as an alternative to OEMAir cleaner because it is not enough to adjust this.
Slight processing may be necessary because the inner diameter of the included Blowby hose? Is Large..
However, I think that it is not a disadvantage because it becomes anyhow if the mechanism is known.
Knowledge that you can properly install and adjust is good, is not it?.
View detail
Fits: HONDA PCX125, HONDA Sh mode, HONDA PCX150, HONDA PCX150
OEM Product and the like. It is over
1. We reached 60,000 kilos, so we exchanged. I was OK even OEM, but I tried outside the company once.
This product is stamped with Logo of HONDA, is it a sense in OEM Product?. After exchanging the feeling, there was no acceleration and the fuel economy improved somewhat. Is 1. Because Element which was running 60,000 km became a new item, I do not know whether this product is behind. There is no problem with installation without any doubt.
View detail
Fits: HONDA PCX125, HONDA Sh mode, HONDA PCX150, HONDA PCX150
Is it an OEM Product?
This Air cleaner seems to be an OEM Parts Number.
There was also a stamp of HONDA and I was able to install it exactly.
A little expensive, but if you order OEM, this one is cheaper ,,,,,,,,,,
View detail
I installed it in APE 50!
I attached it to the APE 50 and used it for a while.
Nice thing
- Intake sound is fairly large and it is fun riding..
- I used it even in the rain but it was usable normally.
- Metallic paint is beautiful.
bad place
- Setting is difficult.. Even if Setting comes out, I will stall if not paying attention to Accelerator operation. If I open Axel at once in Idling with I put it in N, I will momentarily spin down in Air Cleaner Box but if I turn to Power Filter it will be stalled with high probability. Even to adjust PJ, since Air Screw of OEM carburetor of APE can not be adjusted with ordinary tools, PJ can not be exchanged so now we are using it back to Air cleaner box. Big
View detail
Rubber is less degraded
I have used DAYTONA's Filter, but since it was quick to deteriorate
I made it to KITACO. The deterioration of Rubber seems to be relatively small (It is not not necessarily).
All weather type ... just because I just turned on Cover so I breathed in water on a rainy day and cubed
You. It is possible to run if you use oil like K & N, but Cover thinks it is a degree of relaxation
Is good.
There is something like the reduction effect, slightly the characteristic becomes Mild and the sound slightly
I feel Merit for those who can be held down.
Now it is NORMALAIR cleaner that the sound is too big and setting is troublesome
I regressed it, but in the powerful with Cover it is average and can be used with confidence
It is a product. Recommended.
View detail
Fits: HONDA PCX125, HONDA Sh mode, HONDA PCX150, HONDA PCX150
KITACOKITACO:Air Element
My second car My second P PCX 125 (JF56) The mileage also became about 20,000 kilos, and it became the time to exchange Air Element ♪
Honda OEM was also good, but I chose KITACO made for anything but the feeling I saw was almost the same as OEM (Bitter smile)
Well, there is no difference that the performance can be experienced (sweat)
Let's exchange it regularly as a consumable item !!
As the image shows, the difference in dirt is obvious.
After exchanging mood Power up mistake none - - - Wonder!?
View detail
Power Filter
MONKEY Carburetor I bought Filter along with the exchange. I also considered Funnel, but Garbage - Insect etc.. I thought of sucking in and decided on Funnel. Garbageetc. Although there is no suction, again Trouble of Engine stopped occurred on rainy day. Those who ride on rainy days recommend all weather type.
View detail