Reviews
Cosmo
The accuracy of the Sprocket is lower than that of other companies' Sprocket. (The difference between where the Chain is stretched and where it is not is large.)
However, if you take this into consideration and Chain tension the product, I think it is a good cosmetic product.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA SUPER CUB 50-PRO
Good quality rear sprocket from KITACO
This is a good quality rear sprocket from KITACO, it's made of steel so it's much more durable than the aluminium ones if a bit more heavy but on the plus side it is a lot less expensive also. This is 32 teeth, it's 2 less than the original 34 one so it's better for top speed. Another good quality product from KITACO as usual! View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA SUPER CUB 50-PRO
Cheap but good product
I purchased it as a replacement for the original C125. Not only was there not much difference from the original price, but Kitako is a trustworthy brand, so I chose it without hesitation.
The product reviews were good, so I ordered it without even thinking about it. Now the C125 is for life. -------------------------------------------------- -------- I purchased it as a replacement for the original C125. Not only was there not much difference from the original price, but Kitako is a trustworthy brand, so I chose it without hesitation. The product reviews were good, so I ordered it without even thinking about it. Now the C125 is for life. Powered by Google Translator
View detail
KITACO driven sprocket (rear)
Webike Webike.
125 420 420 people Home page.
I want to know what I'm saying.
The quality of the product is very good and the packaging on Webike is also very good.
I purchased the parts for the Monkey 125 420 chain based on the recommendations of other buyers.
I look forward to installing this product. -------------------------------------------------- -------- The quality of the product is very good and the packaging on Webike is also excellent. I purchased it based on recommendations from other buyers and purchased parts corresponding to the Monkey 125 420 chain. I am looking forward to installing this product. When you wear your clothes, you can wear your clothes, you can wear your clothes, you can wear your bike, and you can buy your own clothes. I purchased parts that correspond to other purchases. It's time to put on your clothes and put on your clothes. Powered by Google Translator
View detail
Fits: HONDA glom, HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUB110, HONDA CROSSCUB110
KITACO Drive Sprocket (Rear)
I am satisfied with the quality of Kitaco's rear sprocket in terms of quality and texture.
I was using a 420 chain by mistake, but I bought it for 428. I can use it later when I change to a 428 chain.
I guess I'll take it as a consolation and buy it again ^^
However, since I purchase Kitaco products with confidence, I will use them well. -------------------------------------------------- -------- I am satisfied with the quality of Kitaco's rear sprocket in terms of quality and texture. I was using a 420 chain by mistake, but I bought it for 428. I can use it later when I change to a 428 chain. I guess I'll have to take this as a consolation and buy it again ^^ However, since I purchase Kitaco products with confidence, I will use them well. Powered by Google Translator
View detail
Fits: HONDA LITTLE CUB, HONDA BENLY50CD50, HONDA BENLY50CD90, HONDA BENLY50S, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CL50
It is fun to try the Best Match with FSprocket!
I always enjoy climbing a certain public road with a 3-speed LITTLE CUB, but 3rd gear is not good at all when the DRIVEN is set at 40 with the standard +1. However, the engine load was too large during the long full throttle sections, and I did not know when the engine would break down. I wanted to give the engine a little more room to rev the engine so that even at 40km/h in 2nd gear, the engine was not at full throttle, so I decided to raise the DRIVEN 2 steps at once to 40, skipping over the standard 39. I didn't have a very good Image at the standard 39 Ding.
So I lowered the Driven to 38 Ding and the result was as I expected at first. I was able to get out of 2nd gear at 40km/h±α without having to go full throttle on every Corner. I was happy to find that I did not have to drop to low even on the tightest Corner climbs, and I did not have to drop Engine RPM on most Corner exits when entering the Corner, so as a result, I was able to drive without spoiling the acceleration feeling too much.
In addition, the engine RPMs are now more generous in 3rd gear on the downhill corner, allowing the driver to enjoy a greater sense of speed when entering the corner.
It's fun to experiment with different FRSprockets and see how they run.
View detail
Fits: HONDA CUB press 50, HONDA CUB press 50, HONDA CUB press 50, HONDA CUB press 50
There are not many varieties.
Rear sprocket was replaced because it was rusted and still wanted to swing to the high speed side.
Since PRO's Sprocket seems to be special, NORMALCUB's Sprocket cannot be installed, so this is installed.
It is close to NORMAL but a little on the fast side.
I am comfortable with KITACORear sprocket, which I use all the time.
View detail
Fits: HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, HONDA DAX125, HONDA glom
Kitako I trust!!
The packaging, condition and quality of the item are all good. However, in the case of JB03 Monkey imported to Korea, the screw hole size does not match, so additional 10-pi expansion work is required. Since it has been converted to 428, I believe there will be more reliable driving force transmission and durability. View detail
Fits: HONDA CUB press 50, HONDA CUB press 50, HONDA CUB press 50, HONDA CUB press 50
For the final taste after bore up.
I replaced the Sprocket (Front and Rear) while converting to 88cc this time.
Why change Sprocket?
If you Bore up like I did, you will get more Torque and output than 50 OEM.
Therefore, it is necessary to change the OEM Sprocket setting to release the Engine Power more efficiently. If the clothes are too tight, they will tear, right?
So how can we transmit Power efficiently?
GEAR ratio needs to be changed.
The GEAR ratio is the so-called secondary reduction ratio, which is calculated by “Rear Sprocket Ding Number ÷ Front Sprocket Ding Number ”.
In other words, “how many revolutions of the Front sprocket are required to make one revolution of the Rear Sprocket”.
What are the effects or changes that would occur if the Sprocket is changed or replaced?
[FrontSprocket]
● Increase = higher top speed, lower acceleration, lower rpm when cruising, better fuel economy.
● Reduce = no increase in top speed, better acceleration, higher rpm when cruising, and lower fuel economy.
Rear sprocket
Increasing the number of rpm = no increase in maximum speed, better acceleration, higher rpm when cruising, and lower fuel economy.
● Reduce = Increased maximum speed, reduced acceleration, lower rpm when cruising, and better fuel economy.
The effect is reversed for the front and rear Sprocket.
You can replace either the front or rear, but since 1T on the front is equivalent to 3T on the rear, you may be able to save money by replacing the front if you want to change to a larger size.
I use Rear for fine tuning. 。 When the rear is large, it may get caught on bumps,
If the Front is small, the Chain will cut down the Arm, and if it is large, it will hit the Case.
The Front side may be changed by one or two fingers. After that, adjustment is made on the Rear side.
I purchased the CUB for CUB PRESS, which seemed to be expected to be durable, and replaced it this time.
good point
CUB PRESS→ Newspaper delivery. Since it runs with a lot of newspapers loaded, a more durable Sprocket is used than NORMALCUB.
Durability is high.
○Compatibility with ordinary CUBs.
Chose 14 front and 40 rear for balance between acceleration and maximum speed. It is easy to ride.
The front was changed to OEM13→14, which made it easier to handle in first and second gear.
A bad point
○The price is higher than for a regular CUB.
I think it can't be helped because it is made to be durable.
Rotation of the Engine is transmitted from the Front Sprocket through the Chain to the Rear Sprocket to drive the rear wheels. In other words, the above is synonymous with “ How many revolutions of the Engine are required to make one revolution of the rear wheel? 。
In other words, changing the Sprocket's Ding number is a change in the ratio of the Engine's RPM to the RPM of the driven rear wheels. 。
The change of Sprocket is effective not only for bore up, but also for NORMAL vehicles with low speed gear with low torque, such as 1st and 2nd gear, to make it smoother.
View detail
Fits: HONDA NSF100, HONDA NS50R, HONDA NS-1, HONDA NS50F, HONDA APE 100 TypeD, HONDA NSR mini, HONDA XR100MOTARD, HONDA NSR50, HONDA APE TypeD, HONDA XR50 MOTARD, HONDA NSR80
Rear Sprocket replacement
The Rear of the installed product seemed to be getting a little sharp, so I bought this new one to replace it with a new one along with replacing the Chain with a new one.
The price was not that much, which was helpful.
It looks Black and does not look bad.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA SUPER CUB 50-PRO
Once I want to try the standard.
[How is it used?
I purchased this product because the previousOwner was using something quite different from the standard.
How was your experience with it?
I think the quality is perfect for the price.
View detail
Fits: HONDA SUPER CUB 50, HONDA BENLY50CD90, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA BENLY50S, HONDA BENLY50CD50, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 90, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CL50
It was Out to ask the weight.
Bore up CUB90 to 105cc.
Before the replacement, I had KITACO's F16T and R37 Ding. It gave me great acceleration and I was able to drive uphill very comfortably.
I recently test rode a CT110 HUNTER CUB with a previous rider. Unfortunately, his impression is that the acceleration is too strong and very difficult to use, and as a result, he does not enjoy it. There is a weight difference between riders, but it is only for me, so it is fine if only I can enjoy it. However, it is frustrating to hear this from someone who knows how to use the CUB. I was just reviewing the color of the axle line and decided to replace the RSprocket which is the same process.
I purchased the same KITACO as last time and the number of the pin is 36. The color is the same glossy black as last time and the Sprocket is included in the package. When I store the Sprocket after replacement, I use the package it came in to prevent the Chain oil from sticking to other things. This package is the most convenient when using multiple Sprockets, as long as you have time to clean the oil off each time.
If you are replacing it for the first time, be careful in removing the Sprocket from the Flange. Glasses Wrenchetc. may hit your hand on the sharp Sprocket the moment it is loosened because it is tightened quite hard. If possible, we recommend using a 14mm TWrench.
After the change, the acceleration was definitely reduced. However, the irregular timing has changed and the Change Pedal is easier to operate than before. I am not holding my upper body so strongly when starting, and my riding posture is better. The maximum speed has also changed, but I don't put much emphasis on it because I don't plan to use the speed on my CUB.
The calculated Sprocket ratio gives some idea of what to expect, but it is difficult to get an impression of what it is actually like to ride. Sprocket is a part that can be replaced to adjust acceleration and speed. The price of the parts to be replaced is low for this reason, which is helpful.
I will have the same person test drive it next month. I would like to make a decision in one shot to avoid being tipped off that I'm wasting my money.
View detail
Great sprocket
I wonder where a sprocket is this good at this price. I was looking for a good price-performance sprocket because it's a consumable, and I decided on this one, but I think I did a great job. View detail
thanks
First of all, I think it has the most merit in that it is quite affordable. I bought it believing that it was made by Kitako, not a loose product even though it was cheap. The color is black, so the gold of the chain stands out more and it's pretty. Thank you. I'll use it well. View detail
Fits: HONDA MONKEY125, HONDA glom, HONDA HRC Grom
Black color Simple
I replaced the front and rear Sprocket with Chain on my 2021 Grom JC92. 1 Driven Sprocket to Long and left the Driven Sprocket at 38 and it seems to run very good for me. The KITACO Driven Sprocket is black, unlike the Normal Sprocket, so the suspension feels tighter. View detail
Fits: HONDA APE 100 TypeD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR50, HONDA NSF100, HONDA NS50R, HONDA NS50F, HONDA NS-1, HONDA APE TypeD, HONDA XR50 MOTARD, HONDA NSR80
Balance of practicality and price
We replaced it at the same time when we replaced the Chain on the APE 100TypeD.
The replacement will be from OEMSprocket.
There is no problem in use. If you just want to replace it, installation is easy.
However, if you want to work more precisely when installing the Sprocket on the Wheel, it may be better to have a little ingenuity and a certain level of maintenance skill. However, since there is a lot of play in the diameter of the holes, there is a little less than 1mm of space between the Stud bolt and the Sprocket. Therefore, the center of the wheel and the center of the Sprocket must be aligned before tightening the nut, otherwise the wheel will be shaky in the circumferential direction when it rotates.
I think it is possible to improve the tolerance accuracy of the hole diameter, or to prepare a nut that can be centered in the circumferential direction by making the nut ground surface taper and tightening it, or to have a simple dedicated installation tool for high precision installation. or a simple dedicated installation tool would allow for highly accurate installation.
The material is steel, but the surface is coated with a black coloring, so it can change the atmosphere from the OEM-like silver iron.
View detail
KITACO driven sprocket (rear)
Travel time: 9,000km
I want to know what I want to say
DID It's important to know what's going on.
The cumulative distance exceeds 9,000km and the genuine chain is prone to stretching.
While replacing the chain with a DID chain, I also replaced the front and rear gears.When I replaced the gears and chain at the same time, the running quality improved greatly ----------------- ----------------------------------------- The red range is over 9,000 km The symptoms of the pure chain increases well We replaced the front and back gear together while replacing with the chain of DID. Replacing the gears and chains at the same time, the feeling of driving has improved. Powered by Google Translator
View detail
Installed well
I tried installing from stock 37T to 38T.
The result is improved acceleration but lower top speed.
As expected, the Honda doctors knew the optimal settings.
First of all, the taste is better than the original, so I plan to ride it a little more and then go back to the original 37T. I hope you do not increase the number of T without changing other settings out of curiosity.
The instrument panel error also increases by 2~3 ----------------------------------------- ----------------- I tried to Instel from 37T to 38T The result is improved, but the highest speed is reduced. After all, Dr. Honda's career was the best set. The taste of hitting it is more than genuine, so I'm going to ride more and go back to pure 37t. I hope you will not increase the number of t without changing other settings due to curiosity. The instrument panel error also increases by 2-3 Powered by Google Translator
View detail
Driven sprocket
I installed this with a chain change. As the color becomes black, there is a change in appearance. The painting surface of the part where the chain touches was damaged, but there seems to be no functional problem. View detail
Fits: HONDA LITTLE CUB, HONDA BENLY50CD50, HONDA BENLY50CD90, HONDA BENLY50S, HONDA SUPER CUB 90, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA CL50
Aiming for low fuel consumption & low noise
[How is it used?
In the process of maintenance &restore of the LITTLE CUB that was given to us, we replaced the 90cc engine by Tanaka Shokai's 90cc engine and changed the Driven Sprocket from 41 to 37 from the OEM one. (Driven Sprocket has been replaced with 16T) 。
After the Restore was completed, I rode around for a while in the above state...
First gear is almost useless. (Blows off a few seconds after starting) I wanted to swing a little more to the long side, so I purchased the 35 this time.
Did you receive the item as per the Image?
It is indistinguishable from the 37 Driven Sprocket by KITACO that I purchased last time. (It's the same Manufacturer and only 2 guns are different...) I was too familiar with Parts, a reliable and trustworthy company that has been really good to me, and the product was just like the Image.
Was it difficult to install?
The installation itself is a simple process of loosening four Nuts and tightening them with the specified Torque after replacement, but it is a very tedious process to get to that point.
As mentioned in the previous issue, in order to remove the Rear Axel Shaft from the Little Cub, the Exhaust System, which is blocked on the same line as the Shaft, must be removed before work can proceed. (Limited to OEM Type Exhaust System shape, Up type Exhaust System is Large sturdy) 。
Remove the Exhaust System, remove the Rear brake&Torque rod, remove the Axel shaft, remove the center nut, remove the Rear wheel from the body, loosen the 4 nuts as mentioned at the beginning, replace the Sprocket, and assemble in the reverse order of the previous procedure. The assembly is completed in the reverse order.
How did you like it?
I honestly thought that reducing the Driven side by only two guns would not change anything.
In fact, the Large sound did not change, but the engine became long enough to be useful from 2nd gear, and when cruising on a main road at the same pace as a normal vehicle, the engine sound was reduced and Stress was not felt. The secondary reduction ratio has increased from 2.3125 at 37 to 2.1875.
Was "Included Parts:" attached?
None, Rear sprocketQuantity:This is a 1 pc. only product.
Were there any disappointments?
None
Black, steel, and plain product, but the NORMALSpec. of the old CUB series is covered by the Chain Cover, so you can't see anything from the outside, so it doesn't matter what it looks like as long as the product is functional and solid.
This product is more wallet-friendly than the high-end Duralumin&Anodized Treatment Sprocket in terms of durability and cost. (This is not a denial of luxury Sprocket.) 。
Other items that would be helpful
Point and hang of installation
Above. Was it difficult to install? As described in Section 3.2, be sure to perform the work before and after the installation of this product, and do not forget to tighten it without haste.
[Availability and clarity of the Instruction Manual
There is no Instruction Manual, but the product is very easy to understand.
[Notes]
When replacing the rear side bracket, the braking system must also be removed, so be sure to assemble the bracket securely when installing it.
As for my personal trouble, I have replaced the Chain with a thicker Plate one that is specially designed for durability, and the Chain Cover Bracket is interfering with the Driven Sprocket as its diameter is reduced................it makes me cry.
[ITEMS TO BUY TOGETHER
Aside from replacement for setting, if replacement is for wear, the front and rear Sprocket&Chain is Quantity:This is a place that should be replaced by Set, so please consult with your budget before purchasing.
Since the rear wheel is to be removed and attached, it is better to take into account the wear condition of the rear brake shoe if there is room, so that the work can be done only once, which will make it easier later.
[Opinions and requests to Manufacturer
I continue to be a customer for various parts of Mini bike and I look forward to working with you in the future.
View detail