Reviews
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
It's confusing.
When you purchase Slip-on Silencer.
Click here to purchase Gasket." I bought it together with the Full Exhaust System because there was a LINK with it, but it was a part that I would not use unless I was replacing the Full Exhaust System.
I learned from the Instruction Manual for the Exhaust System I received that a joint gasket is required for the Slip-on Silencer for the first time, so this product was a waste of time.
I would like you to put up a LINK to the recommended parts to purchase for the product.
View detail
So bad
Unfortunately, the Pin was in the wrong position and could not be installed. It was a waste of time. View detail
Fits: SUZUKI GSX1400, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSR400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled)
Compatible with SEA BASS cars?
When I bought a SCProject Slip-on Silencer from Webig, I searched for Gasket as well.
Motorcycle is GSXS1000 (22) It is
Search by Car Type Also, this product was a hit on the Slip-on Silencer's product page. Gasket is here. Tap it and you'll get a hit on this product. 。
However, the product is actually not usable when replacing Slip-on Silencer.
Because it is for the exhaust pipe assembly (before the catalyzer), the size does not fit.
Slip-on Silencer can help you After Catalyzer." You have to look for it in the "Search by car type" section, but it doesn't show up in the search by car type!
The piping size of the Silencer section of the GSXS1000 is
On the Catalyzer side Φ49
It is Φ54 on the OEMSilencer side.
So, I believe the model number is JPS4. For the Silencer part of the GSX1300R HAYABUSA. fits.
speaking one's mind Search for WeBig products by model. is full of holes and governed by a governor.
Gasket, which recommends when purchasing Slip-on Silencer, recommends non-conforming products that cannot be used.
View detail
Fits: SUZUKI RH250, SUZUKI RG250 γ, SUZUKI RG125, SUZUKI GT380
Size is totally different.
Size is totally different.
Small is here.
Struggles to install when used on a set Chamber with Screw type Flange
View detail
Fits: SUZUKI swish, SUZUKI ADDRESS110, SUZUKI Address125
Lack of absolute efficacy
I replaced and installed the OEM Product after 16,000km and it clearly does not work as well as the worn out OEM Product.
I could not even lock the Rear tire on a dry road surface even though I gripped the Brake lever quite hard.
Lever touch is also Sponge-ish and does not have a Snap-like response.
This may make it easier to perform subtle BrakeControl, but in any case, the absolute lack of effectiveness is undeniable.
Therefore, the front brake will be applied more strongly during emergency braking, which is likely to increase the risk of front wheel lock.
This may be a matter of taste, but I was not anxious to use this for a long time.
View detail
Fits: HONDA glom, HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB, HONDA CROSSCUB110, HONDA SUPER CUB110-PRO, HONDA SUPER CUB110
Issues with return method
Challenge to raise 1T of CUB standard DriveSprocket
I went through the process of purchasing a Sprocket that I hit in the My Motorcycle registration, but I couldn't find it.
I was so disappointed that I could not do anything during the 2 to 3 days it took to ship the product. I have been using the site for a few years now, and I have been very pleased with the service. I was disappointed that I could not install it because it was a product with a good texture.
View detail
fraudulent image
Clear bulb was received with the image of Orange bulb.
Even though the description says "Small", is it really necessary to use an image of an Orange bulb?
Coco has a Habit of using these fraudulent images.
View detail
Fits: HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50
I want to cancel it.
I found out the delivery date, it will be 8 months away.
and the email came at 16:48.
If it's going to take that long, I'd rather Cancel.
I didn't do anything and got an email at 5:45pm saying my order was accepted.
I really want to Cancellation.
What should I do?
View detail
Fits: SUZUKI BKing, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Cannot be used with 21GSX1300R HAYABUSA.
GSX1300R (08-21) but...
Cannot be used with 21GSX1300R HAYABUSA.
It is not possible to enter because of the difference in the length.
View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA Monkey Baja, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MOTRA, HONDA MAGNA50, HONDA MAGNA50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CB90, HONDA BENLY90 S, HONDA BENLY50S, HONDA CUB PRESS, HONDA CUB PRESS, HONDA CUB PRESS
I made a mistake.
When you order PCX160 compatible MORIWAKI muffler
It said Gasket in the item section at the bottom.
I just misunderstood and pressed "pop" to order.
……Gasket for MONKEY, GORILLA and SUPER CUB arrived!
I decided not to return it because I would only lose money considering the round trip in shipping!
If you see this, I'll give it to you if you're willing to pay for shipping.
Just say the word.
Product name is XH-01EXGasket
View detail
Fits: HONDA BROS650, HONDA BROS400, HONDA NIGHTHAWK750, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Shadow slasher750, HONDA Shadow slasher400, HONDA Shadow classical400, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW400, HONDA SHADOW400, HONDA SHADOW400, HONDA XL400VTRANSALP, HONDA XL250, HONDA X4
Product is good!
Product is good.
The management company is the worst.
View detail
Fits: HONDA ROAD FOX, HONDA LEAD110(EX), HONDA LEAD 50, HONDA LEAD 50, HONDA VOCAL, HONDA BENLY50110PRO, HONDA BENLY50110, HONDA FLUSH, HONDA PAL, HONDA DIO110, HONDA DIO110, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA Tacty, HONDA ZOOMERX
EWound East Exhaust Gasket
The Gasket that arrived was an XH-02 (for RoadFOX) with an inner diameter (about 24?) and outer diameter (about 30?), but the RoadFOX
Exhaust System and Exhaust System dimensions are inside diameter (about 32mm) I made a double winding of the electric wire of the rank of 2 now, and it won't become useless at all.
I use it as a substitute, because RoadFOX itself is not too much, and I think that there is no order in the future, but I think that attention is necessary
I would like to contact you. The HX-02 I purchased was raised at a local Motorcycle shop, so don't feel bad! 。 White Water
View detail
Fits: SUZUKI RH250, SUZUKI RG250 γ, SUZUKI RG125, SUZUKI GT380
Cheap and bastard
My old Gasket was not this soft. In fact, SEA BASSOEM had no problem at all even if I took it off and put it back on 5 or 6 times.
The size is also RG250 γ adaptation, but it is off by a few millimeters.
There are no other alternative gaskets on the market, so I have no choice but to continue to use KITACO gaskets in the future.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100 TypeD
Product not delivered
It has been delivered, but the item is not there! View detail
Fits: HONDA CB223S, HONDA FTR223, HONDA SPACY100, HONDA SPACY125, HONDA SPACY125, HONDA SPACY125, HONDA LEAD 50, HONDA LEAD 100, HONDA LEAD110(EX)
It doesn't fit
I'm sorry, too, but I'll have to start with the VIN number, take it off of Caliper, and get it in shape It's the damnedest thing I've ever seen I tried to do something about it, but no Eventually … I don't think they'll take returns I gave it to a Motorcycle shop I know 。 I learned that there are many types of pads
If you just use the car name and Manufacturer name … like me, you'll fail
View detail
Fits: HONDA CBX250, HONDA REBEL(-1999), HONDA JADE, HONDA JADE, HONDA XR200, HONDA XLX250, HONDA XL500, HONDA XL400R, HONDA XL250, HONDA XL250, HONDA XL125, HONDA VFR750R, HONDA VFR400R, HONDA VFR400R, HONDA VFR400R, HONDA VF750F, HONDA VF750F, HONDA VF750F, HONDA VF400, HONDA TLR200
It's my fault for not checking it out!
When I searched for CB250R on We-Big, I found this Gasket I didn't suspect anything and popped it in, but it is compatible with the old car and will not fit the current CB250R The model number of this product is XH-09 and the Gasket for CB250R is XH-20 Don't let it be My bad for not checking carefully View detail
Fits: HONDA ROAD FOX, HONDA LEAD110(EX), HONDA LEAD 50, HONDA LEAD 50, HONDA VOCAL, HONDA BENLY50110PRO, HONDA BENLY50110, HONDA FLUSH, HONDA PAL, HONDA DIO110, HONDA DIO110, HONDA TACT Basic, HONDA TACT Basic, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA Tacty, HONDA ZOOMERX
I'm not adapting at all
I bought this for my Honda dunk moped I bought it because it was indicated that it was adapted, but the size was not suitable and I could not use it at all It was View detail
Fits: HONDA LEAD110 EX, HONDA LEAD110, HONDA BENLY50110 PRO, HONDA BENLY50110, HONDA BENLY50 PRO, HONDA BENLY50
I didn't buy it because it's obviously not the case
Where in the world can you attach it to the BENLY50S?
The model number is AA03 and JA09, so it is BENLY50, and BENLY50S is A- CD50 or BA-CD50
It's hard to believe that KITACO, one of the leading names in the MotorcycleParts industry, made a mistake Mistake
I don't think anyone will buy it, but I think it's better to fix it
View detail
There was a lack of research
I ordered based on NORMAL Basic Data, but since it was a used car, Chain It was converted from 428 to 420 As a result, it couldn't be replaced and became a treasure trove of goods View detail
Fits: YAMAHA DT125R, YAMAHA DT125R, YAMAHA DT125R, YAMAHA DT125R, YAMAHA DT125R, YAMAHA DT125R, YAMAHA DT125R, YAMAHA DT125R, YAMAHA DT125R, YAMAHA DT125R, YAMAHA DT125R, YAMAHA DT200R, YAMAHA DT200R, YAMAHA DT200R, YAMAHA DT200R, YAMAHA DT200R, YAMAHA DT200R, YAMAHA TDR50, YAMAHA TDR50, YAMAHA TDR80
Impossible to install
When installing on SEROW 225-3 rw 1, you can not go inside the Caliper unless you scrape Pad 3 or more.
It seems there are no problems with other impresses, so I think whether there are variations in the product.
I am going to ask PRO for troublesome work.
Brake Pads of owned Motorcycle is also regrettable because it was product of KITACO company and there was no defect.
View detail