Reviews
GEMMA125
Used on an 83 SEA BASSGEMMA 125.
The OEM air cleaner had deteriorated over time and the entrance from the carburetor had become hard to get into, so I had no choice but to replace it, but I was able to do it successfully with air conditioning.
It blew up well and the acceleration was good and the idling was constant, but the intake sound became much louder.
The 50 diameter is quite large for a moped motorcycle, so it interferes a little with the GEMMA125's rear fender, but it is within the range of large enough to be sturdy.
View detail
Fits: SUZUKI MARAUDER125 (GZ125), SUZUKI BANDIT1250S, SUZUKI BANDIT1250F, SUZUKI BANDIT1250, SUZUKI BANDIT1200, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman
Exhaust System Replacement
Product Name
KITACO KITACO Full Exhaust System Gasket (1 Set of 2pcs.)
Item Number
963-2000005
Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020
Number of man-hours
5 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
To replace Exhaust System
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
not particularly difficult
How was your experience with it?
There does not appear to be an exhaust leak.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
KITACO driven sprocket (rear)
Travel time: 9,000km
I want to know what I want to say
DID It's important to know what's going on.
The cumulative distance exceeds 9,000km and the genuine chain is prone to stretching.
While replacing the chain with a DID chain, I also replaced the front and rear gears.When I replaced the gears and chain at the same time, the running quality improved greatly ----------------- ----------------------------------------- The red range is over 9,000 km The symptoms of the pure chain increases well We replaced the front and back gear together while replacing with the chain of DID. Replacing the gears and chains at the same time, the feeling of driving has improved. Powered by Google Translator
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
Smooth?
When we changed the chain, we increased the number of pins by one and installed a 16T. At first, I was a little worried that I might not have enough power at the start of the ride, but it was not so much of a problem, and on the contrary, I feel that the ride became a little smoother. It may be just my imagination. View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
Small gear replacement at an affordable price
I replaced the 14T small gear, which is the same as the original one, without any burden. First of all, I have confidence that it is a Kitaco product, and I expect the product to be durable as well. I purchased and installed the chain and large gear together, and I recommend them because they are satisfactory items at a relatively low price ---------------------------- ------------------------------ It is expected that it is a Kitako product. I bought and installed the chain and the waiting gear together, but I recommend it because it can be satisfied with a relatively low price. Powered by Google Translator View detail
Installed well
I tried installing from stock 37T to 38T.
The result is improved acceleration but lower top speed.
As expected, the Honda doctors knew the optimal settings.
First of all, the taste is better than the original, so I plan to ride it a little more and then go back to the original 37T. I hope you do not increase the number of T without changing other settings out of curiosity.
The instrument panel error also increases by 2~3 ----------------------------------------- ----------------- I tried to Instel from 37T to 38T The result is improved, but the highest speed is reduced. After all, Dr. Honda's career was the best set. The taste of hitting it is more than genuine, so I'm going to ride more and go back to pure 37t. I hope you will not increase the number of t without changing other settings due to curiosity. The instrument panel error also increases by 2-3 Powered by Google Translator
View detail
for winter use
I have a Handlebar Cover as a winter spec. but the Brake lever is cold. It is easy to use even with thin gloves. View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
To CT110 HUNTER CUB
Installed together with Exhaust System replacement. After the installation, there was no exhaust leakage. Don't forget to replace the Gasket when replacing the Exhaust System. View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
KITACO Drive sprocket
[About quality and texture] It has good quality that can replace genuine products. [About shipping and packaging] The delivery was very fast, so I was happy to install it quickly. The stapler on the package may be sharp, so be careful when opening it. I will purchase the same product next time. View detail
Driven sprocket
I installed this with a chain change. As the color becomes black, there is a change in appearance. The painting surface of the part where the chain touches was damaged, but there seems to be no functional problem. View detail
Fits: YAMAHA YZF750SP, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA TT250R RAID, YAMAHA TT250R, YAMAHA MT-09 To Racer, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA FZS1000 FAZER
Perfect fit, quality product
cheap and high quality.Excellent functional product. There is nothing complicated about it.Would recommend! Fast shipping as always too. View detail
Fits: SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman LIMITED
The sound has become quieter.
I bought a used SKYWAVE (CJ45A) at a flea market in August 2023, and I felt that the sound was too loud for an OEM exhaust system. I was surprised that the sound became quieter after replacing the exhaust system with this product. I am very impressed and thankful. View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Cospa is good
Scooter has to remove the exhaust pipe every time we change the rear tire, and we try to replace the gasket each time, but the price of OEM products is high. I have been searching for a more cost-effective product.
This is not a product where you will notice a difference in performance, but because it is a consumable product, it meets the objective of keeping the price low.
View detail
Corresponding to CBR250RR2023
I purchased it after checking the Parts List and it worked fine on my CBR250RR2023. However, the Slip-on Silencer I purchased came with a Honda OEM Gasket. (Lol) View detail
Fits: HONDA LITTLE CUB, HONDA BENLY50CD50, HONDA BENLY50CD90, HONDA BENLY50S, HONDA SUPER CUB 90, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA CL50
Aiming for low fuel consumption & low noise
[How is it used?
In the process of maintenance &restore of the LITTLE CUB that was given to us, we replaced the 90cc engine by Tanaka Shokai's 90cc engine and changed the Driven Sprocket from 41 to 37 from the OEM one. (Driven Sprocket has been replaced with 16T) 。
After the Restore was completed, I rode around for a while in the above state...
First gear is almost useless. (Blows off a few seconds after starting) I wanted to swing a little more to the long side, so I purchased the 35 this time.
Did you receive the item as per the Image?
It is indistinguishable from the 37 Driven Sprocket by KITACO that I purchased last time. (It's the same Manufacturer and only 2 guns are different...) I was too familiar with Parts, a reliable and trustworthy company that has been really good to me, and the product was just like the Image.
Was it difficult to install?
The installation itself is a simple process of loosening four Nuts and tightening them with the specified Torque after replacement, but it is a very tedious process to get to that point.
As mentioned in the previous issue, in order to remove the Rear Axel Shaft from the Little Cub, the Exhaust System, which is blocked on the same line as the Shaft, must be removed before work can proceed. (Limited to OEM Type Exhaust System shape, Up type Exhaust System is Large sturdy) 。
Remove the Exhaust System, remove the Rear brake&Torque rod, remove the Axel shaft, remove the center nut, remove the Rear wheel from the body, loosen the 4 nuts as mentioned at the beginning, replace the Sprocket, and assemble in the reverse order of the previous procedure. The assembly is completed in the reverse order.
How did you like it?
I honestly thought that reducing the Driven side by only two guns would not change anything.
In fact, the Large sound did not change, but the engine became long enough to be useful from 2nd gear, and when cruising on a main road at the same pace as a normal vehicle, the engine sound was reduced and Stress was not felt. The secondary reduction ratio has increased from 2.3125 at 37 to 2.1875.
Was "Included Parts:" attached?
None, Rear sprocketQuantity:This is a 1 pc. only product.
Were there any disappointments?
None
Black, steel, and plain product, but the NORMALSpec. of the old CUB series is covered by the Chain Cover, so you can't see anything from the outside, so it doesn't matter what it looks like as long as the product is functional and solid.
This product is more wallet-friendly than the high-end Duralumin&Anodized Treatment Sprocket in terms of durability and cost. (This is not a denial of luxury Sprocket.) 。
Other items that would be helpful
Point and hang of installation
Above. Was it difficult to install? As described in Section 3.2, be sure to perform the work before and after the installation of this product, and do not forget to tighten it without haste.
[Availability and clarity of the Instruction Manual
There is no Instruction Manual, but the product is very easy to understand.
[Notes]
When replacing the rear side bracket, the braking system must also be removed, so be sure to assemble the bracket securely when installing it.
As for my personal trouble, I have replaced the Chain with a thicker Plate one that is specially designed for durability, and the Chain Cover Bracket is interfering with the Driven Sprocket as its diameter is reduced................it makes me cry.
[ITEMS TO BUY TOGETHER
Aside from replacement for setting, if replacement is for wear, the front and rear Sprocket&Chain is Quantity:This is a place that should be replaced by Set, so please consult with your budget before purchasing.
Since the rear wheel is to be removed and attached, it is better to take into account the wear condition of the rear brake shoe if there is room, so that the work can be done only once, which will make it easier later.
[Opinions and requests to Manufacturer
I continue to be a customer for various parts of Mini bike and I look forward to working with you in the future.
View detail
power clamp~!!
Kitako cable clamp. The old clamp is a cable tie.. It's an expensive motorcycle, but it was a shame. It was tied up with a black cable tie, which damaged the appearance. The Kitako clamp is made of metal and can secure the cable tightly, and the silver color matches the handle very well. It looks luxurious. It's good to apply lock tight when you fix it. Thank you. View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100 TypeD
Very high CP ◎No accuracy problems
[How is it used?
Installed on a JC75 Grom.
The custom is an external Full Exhaust System, Mukawa N-15 High Camshaft, i-map, and a mid to high speed Emphasis on Torque Light tuneSpec. with air cleaner processing.
At the same time, DID's SUPERNon-seal Chain was installed.
Was the one you received as per Image?
The image is just as I imagined.
Was the installation difficult?
The maintenance stand I bought the other day didn't fit, so I had no choice but to ask the Shop to install it.
How was your experience with it?
The 14T was introduced, 1T lower than the OEM 15T. The Grom's 4-speed Mission is easier to enter the power band when the Final is set to CROSS, and acceleration is lighter with a higher GEAR ratio in 4th gear.
As a Merit, the Torque feeling during acceleration has been improved as intended, and the expected acceleration feeling can be obtained even when climbing hills. Also, the maximum speed on level ground has increased.
As for the Demerit, fuel consumption will deteriorate because of the higher cruising RPM, and the noise and vibration are somewhat annoying when cruising at high speeds. Naturally, the maximum speed is also reduced. In addition, Groms have a speed sensor in the transmission, so the speed meter can be inaccurate. Groms are happy (displayed higher) by about 10%, but they are also unhappy by about another 10%. (e.g. GPS:60km/h Meter before replacement:66km/h Meter after replacement:72km/h)
[Included Parts:were they on?
HolderPlate is included; Bolt is also recommended for replacement but not included.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If you want to dress-up the Sprocket Cover, you should purchase it first.
View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, Others Universal
Flashing relay
Since the OEM of the MONKEY125 is an LED unit, the Blinker with LED bulbs would be a high flasher, so I was looking for a Relay and found a pontoon from KITACO, which saved me a large change.
It was under the Tank, so it only took a while to remove the Tank.
View detail
Fits: HONDA APE 50, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE 100, HONDA APE TypeD, HONDA XR80, HONDA XR50 MOTARD, HONDA XR250MOTARD, HONDA XR250 BAJA, HONDA XR250, HONDA XR250, HONDA XR100MOTARD, HONDA XR100R (for competition), HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XLR250, HONDA XE75, HONDA XE50, HONDA NSF100
It's usually good
OEM is Quantity:2pc. You need to buy a Set, but this is Quantity:1 Set of 2pcs. so it is slightly less expensive. I recommend this product because there are no exhaust leaks so far. View detail
Fits: HONDA APE 100 TypeD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR50, HONDA NSF100, HONDA NS50R, HONDA NS50F, HONDA NS-1, HONDA APE TypeD, HONDA XR50 MOTARD, HONDA NSR80
I'm in a good mood ….
The NSF100 OEM Sprocket was 28, which swung quite a bit to Long, so we chose 31, swinging 3 guns to the acceleration side.
Thanks to the ability to use GEAR one speed up, it is much easier to drive.
Replacement itself is quite easy if you have enough kills and tools to remove the rear tire.
View detail