Reviews
I think I got the wrong model number….
I don't know if I got the year wrong, but I couldn't fix it with 2 points, but with one bolt, so I'm a little worried. I am satisfied with it. View detail
Place Helmet on Top Bridge and lock it.
The standard helmet holder of ZX14R was placed on the Left Tandem Footpeg, but when the exhaust system was replaced, the Tandem Footpeg was removed and the helmet came in contact with the silencer. The silencer is no longer used since it is placed on the Top Bridge because the rubber may melt when the silencer is hot.
I had been leaving it unlocked, but since I bought a new helmet, I was concerned about theft and decided to purchase a retrofit helmet holder.
It was attached to the Multi Bar with Smartphone Holder so that the Shield could be opened for easy key operation.
It lacks a SMART appearance, but it has achieved its purpose for now, so I will use it for the time being.
I might remove it if I can't stand it anymore (laughs).
View detail
of good quality
However, in my case, the position of the DRing did not reach the Holder because I used SHOEI's GT-air, so I had to purchase a separate wire to accommodate the DRing. The Holder side does not have any problem. The product is well made and looks good as the OEM Level. View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
Installed on SEROW225
In the case of SEROW, it is necessary to change the original upper screw to a bolt with hexagon hole (cap bolt), but this is all that is required to install it. View detail
Better positioned than JC75.
In the JC75, it was Handlebar installed, but in the JC92, it was finally decent. View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
Purchased because the one that came with Motorcycle was not available.
The one on Motorcycle is completely useless, I don't understand why it is attached in that place.
I had no choice but to buy it because I could attach it to Handlebar, but when I was sorting through the parts, I found one I had bought a long time ago and it was Shock.
View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
Mounted on TENERE700
As other people's impressions, I moved it to Handlebar, just like SEROW I used to ride, and I feel somewhat safer having it here than at Tandem Footpeg. View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
Used in MT07. Not as expected.
I wanted to put a helmet on the Right Back Mirror and a bracket on it, but the direction of the bracket was Right and I couldn't reach it.
I tried to attach the Helmet in the original way, but it interfered with the Handlebar and Tank, so it was not the best way to attach it.
View detail
Even a beginner can install it easily!
Helmet holder for simple locking of helmets while riding around town or touring.
It does not have a luxurious feel, but I think it is practical enough for everyday use on the go.
Installation is very easy. Even beginners with little experience can do it.
The pedestal is completed by removing the Tandem Footpeg on the Left Side of the vehicle body, inserting the attached Bracket and then co-tightening the attached M8Bolt with a 5mm Hex wrench.
Simply attach the Body to it and you are done.
It is safe to apply Screw lock agent to each Bolt.
View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
Convenient.
I have a CB250R with a helmet holder, but it is difficult to use.
The high position makes it easy to use the Large change without the need to bend down.
View detail
Fits: Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA PCX125, HONDA PCX125 E:HEV, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CROSSCUB110, HONDA glom, HONDA MONKEY125, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
Required for MONKEY125
The OEMHelmet holder for the MONKEY125 is useless, so this is handy!
Essential Items for MONKEY125 riders
View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
Compatible with TENERE700 Helmet holder
The Helmet holder of the TENERE700 was located near the Chain and was difficult to use, so I purchased it for the purpose of attaching it to the Handlebar.
The Holder that came with the product was replaced and installed where it was originally attached.
View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
Mounted in a location other than the original position
I tried to install it using the master cylinder bracket, but it didn't feel right.
I drilled holes in the Short fender and made my own Base and installed it.
The Holder's Hook can open and close downward, making it very easy to use.
View detail
Fits: HONDA PCX125, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA PCX125 E:HEV, Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA MONKEY125, HONDA glom, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
Helmet holder relocation of TENERE700
Helmet holder of TENERE700 is on Left SideTandem Footpeg, so contact with dirt around Chain line and Rear is a concern
So, the relocation to Handlebar, which has become a standard in SEROW, etc., is carried out.
Satisfied with the ease of use and no longer have to worry about stains.
I will divert the OEM lock, so if you can sell only the Bracket and Bolt without Lock at a lower price, that's all I need to say.
View detail
KITACO Helmet holder
Good manufacturing accuracy and easy installation.
The Helmet hooking position is too low when in use.
I was a little concerned, but it is not inconvenient to use.
View detail
I put it on just in case.
The OEM Helmet holder of JC92 Grom is too hard to use, so I put it on.
I added a RearBOX so I don't get to use it as often as I would like, but it will come in handy when I need it.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CBR125R, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA Z125 Pro, HONDA CT125CT110 HUNTER CUB, HONDA PCX125, HONDA PCX125 Hybrid, HONDA glom, HONDA ZOOMERX, YAMAHA BWS125, YAMAHA BWS 50, YAMAHA MAJESTYS, Others , HONDA CB150R, HONDA CB300R
out of the way position
The OEM Helmet holder for the CT110 HUNTER CUB is a type that hooks to the seat with a raised wire, so it takes a lot of time and effort, so I considered purchasing this product. There are various types of installation positions, such as next to the seat, left side installation of the rear carrier, etc., but I chose this product considering the ease of installation of the Helmet without getting in the way when loading luggage. When I park, I use Side Stand, and because Handlebar is set to Left and Handlebar Lock is done, Handlebar becomes the form which rises on Right, I put Helmet on Right Side of Handlebar, and when I use lock on Helmet, it becomes a good form. If you put Helmet on the Right Side of the Handlebar and use Lock on Helmet, you can get a good shape and easy to lock.
I gave it 4 stars because when I tighten the bottom bolt, there is a little gap between the two bolts.
View detail
It is useful for Helmet theft.
I bought this because it was hard to get the Helmet into the compartment under the Seat.
Installation is easy
Because of the low mounting position, the Helmet is closer to the ground.
View detail
Fits: KAWASAKI Z125-PRO, HONDA CB250R, HONDA CBR125R, HONDA CB125R, HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, HONDA glom, HONDA PCX160, HONDA PCX150, HONDA PCX125 Hybrid, HONDA PCX125 E:HEV, HONDA PCX125, HONDA ZOOMERX, YAMAHA MAJESTYS, YAMAHA BWS125, YAMAHA BWS 50, Others
On any motorcycle, there's a Helmet holder in this position!
On all the Motorcycles I've ridden recently, I've always put a Helmet holder in this position.
So I bought and installed it on the for GPZ900R again.
The CB400SB was the same, but with a motorcycle with a cowl, you can put a Helmet between the Tank and the Cowl.
You can lock it in place. That way, even if it rains or something, it doesn't get wet inside and it's stable.
The good thing about this lock is that you can remove the key after unlocking it.
It's easy to lock and easy to unlock.
View detail
Fits: HONDA CB125R, HONDA CB250R, HONDA CBR125R, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA Z125 Pro, HONDA CT125CT110 HUNTER CUB, HONDA PCX125, HONDA PCX125 Hybrid, HONDA glom, HONDA ZOOMERX, YAMAHA BWS125, YAMAHA BWS 50, YAMAHA MAJESTYS, Others , HONDA CB150R, HONDA CB300R
I'm using it to relocate OEM parts
We used it to relocate the OEM Helmet lock
D I moved it to the Handlebar on Tracker 125
It is solidly built and used, although the installation was a little off
View detail