Reviews
Ultra robot arm lockTDZ-09
the best part
It looks rugged and seems indestructible.
Rock Shaft Sponge kindly.
What's on my mind
As I said, it's heavy. (It's a good place, though.) 。
The key hole is bare, I wanted it to have a lid.
Does not bend freely like a wire lock (We need to check the direction of bending) 。
Personally, I wish the length was about 500mm longer.
The durability of the Cover is yet to be determined.
View detail
Exhaust SystemTheft Prevention
When I was younger, I lived in a place that wasn't as safe as my current location.
Quantity of OHLINS within a week of purchasing a new car:2pc suspension was stolen, and 10 days later, there were signs that the key cylinder was directly connected.
A few months later, the exhaust system (only the silencer part of the Slip-on Silencer) was stolen.
Exhaust SystemBought to prevent theft.
I don't have any problems thanks to the safety of the place where I currently live.
Even if you lose the adapter to be removed, you can ask the manufacturer for the adapter of that type, since there is a unit number.
You can purchase it.
View detail
GYROUP's mounting strength of the carrier and anti-theft
Because GYROUP's loading platform was quite heavy but only fixed with M8 Bolt 4 pieces, from when it was changed from 8 Mark's Hexagon Bolt to Nameless Set bolt, it also doubles as a theft prevention by special shape.
Although Screw was about 10 mm longer than OEM, I was worried that it would not interfere, but I was able to fix the loading platform firmly with high strength and wider Flange without interfering in particular.
As a disadvantage, because the installation tool is a hexagon of 8 mm because of the strength of Bolt, it is difficult to wear Torque wrench and it is likely that the hexagonal part of the tool will be frozen unless Torque is applied carefully when tightening.
It would be nice if you could use an on-board tool if it would be at least 12 mm.
View detail
Satisfied with performance
It is the second purchase..
Since I was previously stolen outside the company's Exhaust System, I installed the external exhaust system purchased again using this product, but it seems that I came to steal again without sex (Probably the same criminal!) One day when you notice it, Quantity : I discovered that the Cover part of Bolt of 1 pc out of 2 pc is turned upside down.
It seems that he tried to force Bolt by forcefully turning over Cover with Pliers or something.
However, it seems that I gave up on the way that I was holding 2 places with the same Bolt and that I used the Nut version of this product on the Reverse side.
This time I purchased Cover for Bolt as it was left as it is because it feels bad so I bought it as for Replacement, but at the same time I saw "Review WirusWinWirusWin : Key Cap To Prevent From Theft for M8 "was imitated.
This also prevents the destruction of Cover itself, the degree of security has improved more.
This usage is recommended for those who have no problem with Cost and installation Size.
It demonstrates the expected performance and prevents theft beforehand so that we are satisfied with Large's change, but I feel that the honest price is high.
I do not have to say a little more though, but.
View detail
Although it was unclear, it purchased to the theft prevention of the muffler (SP Tadao) of a skywave (burgman). Key cap for parts theft prevention of a wiruswin It has used together and equipped. I think that this is considerably effective. Si
Although it was unclear, it purchased to the theft prevention of the muffler (SP Tadao) of a skywave (burgman).
Key cap for parts theft prevention of a wiruswin It has used together and equipped.
I think that this is considerably effective.
Since it is the screw type currently ordinarily sold at marketing although there is also a torque type screw called the object for theft prevention, it stands on no role, but this will be dramatically helpful to theft prevention, since it is a special die.
Although the thing whose price of one star having reduced is high is good, it is regrettable that a nut is an option (an accessory is usually a nut).
Since it is good since a nut is not used for my use, but it is removed simply and is meaningless, if a nut is common when it is bolt nut use.
since measure with a nut becomes a double price as an option, although a theft preventive effect is high, does it become painful expenses?
View detail
When SEROW 250 was equipped with a delta barrel 4 silencer + torque head pipe, the silencer was stopped by the body guard (^-^) Since removal will be impossible if there is no exclusive socket and a destination is also hard to suit a theft, it is safe.
When SEROW 250 was equipped with a delta barrel 4 silencer + torque head pipe, the silencer was stopped by the body guard (^-^) Since removal will be impossible if there is no exclusive socket and a destination is also hard to suit a theft, it is safe.
To it, since the logo of KITACO is chromeplating specification with a joke although it is theft prevention parts.
There is also a high grade feeling and appearance is also the highest (since--笙ェ construction material is chrome-molybdenum steel (SCN435 forging material)).
it can bind tight strongly like the socket wrench in which there is no problem also in reinforcement and bolting is also ordinary (^笳?) as [ be / ordering only a socket / if it is a problem when a socket is lost, but the key number is cut down / possible ] -- in -- price and, since it is handy and is 2 sets.
There is an inexpensive feeling (^.^) If a bad point is said -- If it uses for a long time since it is a product made from steel, a chromeplating will become thin and rust will come up (>_
View detail
As a result of being told about that there are many silencer thefts of nitro racing and considering theft prevention, the body guard was found from Mr. Kitaco's catalogue, and the silencer band part is equipped. It is thoroughly settled in stay seat G
As a result of being told about that there are many silencer thefts of nitro racing and considering theft prevention, the body guard was found from Mr. Kitaco's catalogue, and the silencer band part is equipped.
It is thoroughly settled in stay seat GURI, and is perfection.
View detail
Although a price is carried out very well, there is sense of security. Although acted as Locke of the muffler, it is recommended, without loosening by vibration.
Although a price is carried out very well, there is sense of security.
Although acted as Locke of the muffler, it is recommended, without loosening by vibration.
View detail
It purchased to the theft prevention of an ohlins and a muffler. I think that it is functionally useful for theft deterrence also at appearance. Since it thought that there should just be size deployment more with having liked you to use a stainle
It purchased to the theft prevention of an ohlins and a muffler.
I think that it is functionally useful for theft deterrence also at appearance.
Since it thought that there should just be size deployment more with having liked you to use a stainless for a raw material, they are four stars.
View detail
M8xL25xP1.25 is used for a Zep750+ new style crab (phi 34) (support and a torque rod are the products made from specifications engineering). Since a bolt end interferes in a rotor, the head end is made for it to be good exactly, if there is a thing of
M8xL25xP1.25 is used for a Zep750+ new style crab (phi 34) (support and a torque rod are the products made from specifications engineering).
Since a bolt end interferes in a rotor, the head end is made for it to be good exactly, if there is a thing of L20, but to bite color (5 mm thickness).
I think that crime prevention nature is higher than a usual cap bolt and torque.
View detail
Zep750+BREMBO casting It is used. Although M10xL35xP1.25 of the size was mostly chosen with the Faulk side pure bolt, it is settled in Faulk at condition that a head section is nice (support is a product made from Active). Incidentally with the ph
Zep750+BREMBO casting It is used.
Although M10xL35xP1.25 of the size was mostly chosen with the Faulk side pure bolt, it is settled in Faulk at condition that a head section is nice (support is a product made from Active).
Incidentally with the photograph, M10xL25xP1.5 (for BREMBO) is used for the caliper side (the bottom is an ordinary cap bolt, respectively).
Although there is little sizing, they are the goods considered well.
View detail