KITACO Motorcycle Reviews - Webike Thailand

Filter

Write a review and get Webike Points!

Reviews

CB300R KITACO Clear all

KITACO

20 Mar 2024

Power Out-put Harness

Fits: HONDA Rebel300, HONDA CB300R, HONDA CB500X, HONDA REBEL250, HONDA REBEL250, HONDA FORZA-Z, HONDA FORZA-X, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA VTR, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125

Japanese Webike user

5/5

Easy power extraction

I put this on my 2023 CB1300SB and was able to connect it without removing the rear cowl. The price is reasonable and I am glad I bought it. View detail

KITACO

18 Feb 2024

Power Out-put Harness

Japanese Webike user

5/5

Mounted on REBEL 1100

I couldn't find any for the Rebel 1100, but this product was said to be compatible with it, so I bought it and installed it as an ACC power source for the Fog Lamp Unit. It was a simple installation, just peel off the tape and install it between the couplers. View detail

KITACO

21 Oct 2023

Power Out-put Harness

RSL JAPAN

5/5

Prefect

This will be perfect solution for power tap without damaging any cables. I'm using in honda hornet 250F7 Firmaly fitted to existing wire loom socket.power out cable along with cable tag,this will help to identify connection.dont forget to use fuse for external protection.good product.made in japan Recommended for DIY enthusiast. View detail

KITACO

22 Jun 2023

Power Out-put Harness

Japanese Webike user

5/5

REBEL 1100 was also OK

Although it is not listed as a compatible model, I was able to install it on my Rebel 1100 without any problems.
When the Left Side Cover is removed, there is an OEM coupler wrapped in Vinyl Tape. View detail

KITACO

04 Jun 2023

Power Out-put Harness

Japanese Webike user

5/5

This is for taking out the power supply.

Used to install DAYTONA Oil Temperature Meter and Voltmeter.
Installation is easy and immediate.
If you plan to install more than one Attachmentetc., you can use ACCWiring
It is convenient to branch out beforehand.
Incidentally, Emon power supply branch Harness (Bullet Type TerminalType) AV1.25sq
You can buy a pack of three for about 350 yen. View detail

KITACO

08 May 2023

Power Out-put Harness

Japanese Webike user

5/5

Pontoon on MONKEY125

There are many kinds of this kind of harnesses for Honda, and I was able to find one that fits my MONKEY125 without a doubt, so installation was a piece of cake. The MaleConnector that connects to the Harness was also matched for Honda, so there was no problem in connection.
If possible, MaleConnector should also be included. View detail

KITACO

28 Apr 2023

Power Out-put Harness

Japanese Webike user

4/5

I was thinking of making my own.

I read the schematic in the Service manual and saw Coupler and thought about making it myself, but considering the hassle, I'd rather buy it.
ACC extraction from here is used as an operating signal line for DAYTONA's D-UNIT. View detail

KITACO

01 Apr 2023

Power Out-put Harness

Japanese Webike user

5/5

JC92 is easy.

JC75 is quite Large strange, but JC92 can be easily installed without Seat.
Basically, there is no choice for JC92.
USB power supply is taken from FBrake because RedWiring is not a disgrace.
This will pull it around. View detail

KITACO

26 Mar 2023

Power Out-put Harness

Japanese Webike user

5/5

This is a must for JC75

JC75's Rear Fender's Plus screw Overtorque on the Rear Fender could not be removed.
I worked forcibly from the side and had quite a bit of trouble finding the position.
I took this one because the Red line is not so shabby if you take USB from FBrake.
Next time we will install it on JC92. View detail

KITACO

22 Mar 2023

Power Out-put Harness

Japanese Webike user

5/5

It worked for DAX125 (JB04)

The Harness for DAX125 from KITACO is a type that takes power from the Headlight, but there is also a 4-pin Option Coupler on the Rear side that can be used with this Harness. It is my responsibility, but I was able to get both Battery and Attachment power supply. View detail

KITACO

18 Mar 2023

Power Out-put Harness

Japanese Webike user

5/5

Also fits 2BL-NC56

Used on NC56 400X for additional instrumentation.
It can be connected to a non-compliant NC56 without any problem.

Unlike the same type of product made by DAYTONA, it is convenient to have not only ACC but also battery power supply, but the crimped Bullet Type Terminal is a small diameter one of Hondafor Vehicle, so it needs to be replaced depending on the connection point. View detail

KITACO

05 Feb 2023

Power Out-put Harness

Japanese Webike user

5/5

Power Extraction Harness

Easy installation by simply inserting the Coupler. View detail

KITACO

03 Jan 2023

Power Out-put Harness

Japanese Webike user

5/5

REBEL1100 power supply extraction

I was looking for a power extraction harness for the Rebel 1100, but I could not find a suitable product and the answer to my inquiry was that they did not know. I found a review of this product on a website, so I bought it. The only thing to do is to remove the connector wrapped in tape from the black rubber cover inside the Right Side Cover and install it. ＋If you want to use USB power supply with ACC, just connect ACC+ and −. View detail

KITACO

28 Dec 2022

Power Out-put Harness

Japanese Webike user

5/5

Very convenient

Couplet-on makes it super easy to take out the power supply.
In the case of ADV150, however, it is too narrow to connect to the coupler on the body side only by removing the front side cover, so it is easier to work by removing the cover from the meter and the cover below it.
I tried to force it through the gap, but it was frustratingly difficult to remove the coupler cover. (Lol) View detail

KITACO

05 May 2022

Helmet holder

Fits: HONDA CB125R, HONDA CB250R, HONDA CBR125R, HONDA PCX125, HONDA PCX125, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA Z125 Pro, HONDA CT125CT110 HUNTER CUB, HONDA PCX125, HONDA PCX125 Hybrid, HONDA glom, HONDA ZOOMERX, YAMAHA BWS125, YAMAHA BWS 50, YAMAHA MAJESTYS, Others , HONDA CB150R, HONDA CB300R

Japanese Webike user

5/5

Ideal for moving OEM helmet holder position

The SEROW helmet holder is located near the rear tire, so I hesitate to hang my helmet on the handlebar when I ride after it rains because it is dirty with mud. I can use it with the key of the motorcycle. View detail

KITACO

24 Apr 2022

Power Out-put Harness

Japanese Webike user

5/5

Easy Attachment power supply.

PCX125 (JF28) I purchased this product to install a USB power supply to the

I had a hard time removing the Windshield, but it took only 30 seconds to install this product into the Service power supply, just plug it in.
You can choose between a constant power supply and an attachment power supply, depending on your needs, so it is a good idea to separate them according to what you want to add.

Since it is a product used only for extracting power, there is nothing more to mention, but it is made by a large-handled manufacturer, so there are no problems with its manufacturing.

Incidentally, since the terminal shape is Bullet Type Terminal, it may be necessary to modify the wiring of the device to which it is to be attached.
In this case, you will need to prepare Male of Electric Works Pliers and Bullet Type Terminal, which you can buy in advance. View detail

KITACO

25 Dec 2021

Power Out-put Harness

Japanese Webike user

4/5

Installed on ADV150 Split ACC for USB power supply

Used for ADV150.
Peeling off the Cowling is a challenge, but putting on the product itself is easy because you just plug it in.
Of course, there is no place provided to fix it, so I used Tie Wrap to fasten it. View detail

KITACO

01 Nov 2021

Power Out-put Harness

Japanese Webike user

4/5

Easy power extraction

I used it to take the Attachment power out of my ADV150.

Just remove the Cowl on the Left Side, take off the lid of the Coupler for the Attachment power supply and replace it with this part.

Because the size of the female side of the terminal of this KITACO did not match with the Bullet Type Terminal of Emon that I used, I replaced the Bullet Type Terminal with the one of Emon after all.

I used the Grip heater for Attachment Wiring, but you can also use Battery Direct Power Wiring. It's very nice and rabbeted. View detail