Reviews
Fits: HONDA VALKYRIE, HONDA VALKYRIE, HONDA REBEL(-1999), HONDA HORNET250, HONDA NIGHTHAWK250, HONDA GOLD WING F6C, HONDA GOLD WING F6B, HONDA GOLD WING, HONDA GOLD WING, HONDA XR400 Motard, HONDA XR230MOTARD, HONDA XR230, HONDA XR200, HONDA XLR200, HONDA XLR125R, HONDA XL230, HONDA VFR800F, HONDA VFR800, HONDA VFR800, HONDA SL230
It works fine
[How is it used?
It is not running but was replaced last month.
Was the one you received as per Image?
Yes, there is nothing unusual.
Was the installation difficult?
There are no special difficulties.
How was your experience with it?
Since it is Gasket, I am not sure how it differs from others, but it is not particularly crudely made or anything, so I think it can be used without problems.
[Included Parts:were they on?
Only two Gasket.
[Was there anything that disappointed you?
Not particularly
View detail
Fits: HONDA VALKYRIE, HONDA VALKYRIE, HONDA REBEL(-1999), HONDA HORNET250, HONDA NIGHTHAWK250, HONDA GOLD WING F6C, HONDA GOLD WING F6B, HONDA GOLD WING, HONDA GOLD WING, HONDA XR400 Motard, HONDA XR230MOTARD, HONDA XR230, HONDA XR200, HONDA XLR200, HONDA XLR125R, HONDA XL230, HONDA VFR800F, HONDA VFR800, HONDA VFR800, HONDA SL230
Necessities for Exhaust System Removal/Installation
The exhaust pipe had been installed and the flange was bent due to over-tightening.
The Gasket was still crushed and stuck to the Cylinder.
With the Pick tool, I forced it off by sticking the Pick while pulling on the Gasket.
Cylinder was cleaned with foam Carburetor cleaner and Dustcloth, and exhaust pipe was cleaned with Oil stone.
When installing the Gasket, it is best to install it on a slightly inclined surface with the Front facing up so that the Gasket will not fall off.
Put in a new Gasket, tighten the exhaust pipe by hand, and set the Quantity:Pair (for Left and Right) Tighten it to even etc.
If you get to the point where it will not tighten, adjust the exhaust pipe up or downQuantity:Pair (for Left and Right) The first time, the client shakes the machine to see if it is settled. Then tighten it again by hand.
When it got to the point where I couldn't tighten it anymore, I tightened it with an Offset wrench at about 90-degrees to 180-degrees to even etc.
If there are no exhaust leaks, the system is complete.
I think it is loose, so I recommend checking regularly or double nut. If you tighten it too much, it is not the end of the world.
I did not take pictures of the work since it is a friend's vehicle.
View detail
Fits: HONDA VALKYRIE, HONDA VALKYRIE, HONDA REBEL(-1999), HONDA HORNET250, HONDA NIGHTHAWK250, HONDA GOLD WING F6C, HONDA GOLD WING F6B, HONDA GOLD WING, HONDA GOLD WING, HONDA XR400 Motard, HONDA XR230MOTARD, HONDA XR230, HONDA XR200, HONDA XLR200, HONDA XLR125R, HONDA XL230, HONDA VFR800F, HONDA VFR800, HONDA VFR800, HONDA SL230
after five years
Dropping Carbon in the exhaust system in the rainy weather.
Naturally, the exhaust system has to be removed and the gasket has to be replaced.
It was cleaned because Carbon has accumulated in the Exhaust System.
It will stick to you again soon enough, but...
We've all had the experience of the Gasket falling off when installing an Exhaust System, and I guess.
It was a thing again, LOL.
I'm not sure about the performance of the Gasket itself, but I don't think it's much different than the OEM. It is.
However, after removing Carbon, I feel that the Engine is now in better shape.
View detail
Fits: HONDA VALKYRIE, HONDA VALKYRIE, HONDA REBEL(-1999), HONDA HORNET250, HONDA NIGHTHAWK250, HONDA GOLD WING F6C, HONDA GOLD WING F6B, HONDA GOLD WING, HONDA GOLD WING, HONDA XR400 Motard, HONDA XR230MOTARD, HONDA XR230, HONDA XR200, HONDA XLR200, HONDA XLR125R, HONDA XL230, HONDA VFR800F, HONDA VFR800, HONDA VFR800, HONDA SL230
Also available for new CBR 250 RR
New type CBR 250RR (MC51) I bought the Full Exhaust System of.
Although it seemed that the conformity confirmation was not yet obtained, purchase this here by the original bad.
Old type CBR 250 RR (MC22) There was a statement of. While considering the same size as 4 cylinder, order.
Result It was Don Pissha.
I think that one who is uneasy to purchase an OEM is better, but since it can be installed for the time being and there is no exhaust leakage, I will keep it as reference information.
View detail
Fits: HONDA VALKYRIE, HONDA VALKYRIE, HONDA REBEL(-1999), HONDA HORNET250, HONDA NIGHTHAWK250, HONDA GOLD WING F6C, HONDA GOLD WING F6B, HONDA GOLD WING, HONDA GOLD WING, HONDA XR400 Motard, HONDA XR230MOTARD, HONDA XR230, HONDA XR200, HONDA XLR200, HONDA XLR125R, HONDA XL230, HONDA VFR800F, HONDA VFR800, HONDA VFR800, HONDA SL230
The publication photograph of the product is subtle
As it is a HORNET 4 cylinder, it is necessary for four, but as long as I looked at the photograph of the posted item, it was clearly the copper color and Silver color "Quantity : 1 Set of 2pcs. "I only saw it. The text includes Quantity : 1 Set of 2pcs. I wrote that it is, but for myself who need 4 copper colors you can only buy 4 Pack. After all, the same goods that arrived were the same copper color "Quantity : 1 Set of 2pcs. "was.
Eventually I bought eight in 4Pack, and a bit of frustration remained.
There is no problem with the quality and precision of products.
View detail
Fits: HONDA VALKYRIE, HONDA VALKYRIE, HONDA REBEL(-1999), HONDA HORNET250, HONDA NIGHTHAWK250, HONDA GOLD WING F6C, HONDA GOLD WING F6B, HONDA GOLD WING, HONDA GOLD WING, HONDA XR400 Motard, HONDA XR230MOTARD, HONDA XR230, HONDA XR200, HONDA XLR200, HONDA XLR125R, HONDA XL230, HONDA VFR800F, HONDA VFR800, HONDA VFR800, HONDA SL230
good
Exhaust System Let's exchange Gasket whenever you replace it or remove it.
Used spinning is the cause of exhaust leakage.
If this is bad it will not be a talk.
It is an ordinary good item.
I pray that you will collapse and not break 1,000 times.
View detail
Fits: HONDA VALKYRIE, HONDA VALKYRIE, HONDA REBEL(-1999), HONDA HORNET250, HONDA NIGHTHAWK250, HONDA GOLD WING F6C, HONDA GOLD WING F6B, HONDA GOLD WING, HONDA GOLD WING, HONDA XR400 Motard, HONDA XR230MOTARD, HONDA XR230, HONDA XR200, HONDA XLR200, HONDA XLR125R, HONDA XL230, HONDA VFR800F, HONDA VFR800, HONDA VFR800, HONDA SL230
Used when replacing Exhaust System
This time we are using it when exchanging from OEMExhaust System.
Goods also Quantity : 2pc. Re-change of the Exhaust System when it is in Set, at the time of maintenance
I think that it is convenient because it can be used for removing the Exhaust System.
View detail
Fits: HONDA VALKYRIE, HONDA VALKYRIE, HONDA REBEL(-1999), HONDA HORNET250, HONDA NIGHTHAWK250, HONDA GOLD WING F6C, HONDA GOLD WING F6B, HONDA GOLD WING, HONDA GOLD WING, HONDA XR400 Motard, HONDA XR230MOTARD, HONDA XR230, HONDA XR200, HONDA XLR200, HONDA XLR125R, HONDA XL230, HONDA VFR800F, HONDA VFR800, HONDA VFR800, HONDA SL230
OEM is expensive or is it cheap?
As I had to remove the Exhaust System, I tried to buy it in advance
OEM is expensive!
I thought how bad this was, when I looked for Other Company Product.
And Quantity : 1 Set of 2pcs.. I am friendly to your Wallet.
There is nothing wrong with making it bad, it does not stop, it's too small There is nothing wrong.
It cost me half the price.
Since Gasket can not be used with peeping when removing Exhaust System which has been using for many years
Be sure to change.
View detail
Fits: HONDA VALKYRIE, HONDA VALKYRIE, HONDA REBEL(-1999), HONDA HORNET250, HONDA NIGHTHAWK250, HONDA GOLD WING F6C, HONDA GOLD WING F6B, HONDA GOLD WING, HONDA GOLD WING, HONDA XR400 Motard, HONDA XR230MOTARD, HONDA XR230, HONDA XR200, HONDA XLR200, HONDA XLR125R, HONDA XL230, HONDA VFR800F, HONDA VFR800, HONDA VFR800, HONDA SL230
Bought the XH-12 model for my CB400SS. the quality is not perfect like the description photo. it has rust in some parts. Size: 31.5mm x 39.8mm x 4mm
Bought the XH-12 model for my CB400SS. the quality is not perfect like the description photo. it has rust in some parts. Size: 31.5mm x 39.8mm x 4mm View detail
Fits: HONDA VALKYRIE, HONDA VALKYRIE, HONDA REBEL(-1999), HONDA HORNET250, HONDA NIGHTHAWK250, HONDA GOLD WING F6C, HONDA GOLD WING F6B, HONDA GOLD WING, HONDA GOLD WING, HONDA XR400 Motard, HONDA XR230MOTARD, HONDA XR230, HONDA XR200, HONDA XLR200, HONDA XLR125R, HONDA XL230, HONDA VFR800F, HONDA VFR800, HONDA VFR800, HONDA SL230
I used it for FTR 223.
We also exchanged Gasket when exhaling system of FTR 223 was exchanged.
Gasket will be attached without problems.
It is hard to peel off the old Gasket.
Besides, ADDRESS V 125 uses KITACO 's Gasket.
The price is also cheap, Quantity : 1 Set of 2pcs. So I am satisfied.
View detail
Fits: HONDA VALKYRIE, HONDA VALKYRIE, HONDA REBEL(-1999), HONDA HORNET250, HONDA NIGHTHAWK250, HONDA GOLD WING F6C, HONDA GOLD WING F6B, HONDA GOLD WING, HONDA GOLD WING, HONDA XR400 Motard, HONDA XR230MOTARD, HONDA XR230, HONDA XR200, HONDA XLR200, HONDA XLR125R, HONDA XL230, HONDA VFR800F, HONDA VFR800, HONDA VFR800, HONDA SL230
Necessities of CBR 150R
Although not included in the compliance table of Manufacturer, the Exhaust Gasket used for CB 400 SS and Honda 223 cc Single Engine is also a compatible part of imported car CBR 150 R.
Exhaust pipe of CBR 150 R is full of Rust as soon as the film of heat resistant paint is weak. It is good to detach and re-paint before Rust becomes serious, but at that time also exchange Gasket.
KITACO 's Gasket has been using it many times, there is no mistake in quality, it is cheaper than OEM, and you can get it right away.
If you remove it well and install it, reuse of Gasket is not impossible. However, due to reuse, when the exhaust gas leaks, the Engine becomes dirty and becomes Power loss. In the first place, removal of the exhaust system including the exhaust system is heavy, it is a big part, so it is troublesome to replace it. Because it is a cheap part, always invite replacement.
When you order something with webike, you do not have to pay shipping cost, it is not even Parts taking place because you buy it, so do not get in the way.
Easy to install if you can replace Exhaust System. The precision of Gasket is coming out and it arrives Exactly. It would be rather difficult to remove the old Gasket. Some are easier to disengage, others are unmistakable if they do not work with Slotted screwdriver.
Although the removed Gasket fragment is flat, I bought Gasket is round. It may be thought that the shape is different, but unlike Oil drain etc., it becomes deformed by tightening and becomes flat.
View detail
Fits: HONDA VALKYRIE, HONDA VALKYRIE, HONDA REBEL(-1999), HONDA HORNET250, HONDA NIGHTHAWK250, HONDA GOLD WING F6C, HONDA GOLD WING F6B, HONDA GOLD WING, HONDA GOLD WING, HONDA XR400 Motard, HONDA XR230MOTARD, HONDA XR230, HONDA XR200, HONDA XLR200, HONDA XLR125R, HONDA XL230, HONDA VFR800F, HONDA VFR800, HONDA VFR800, HONDA SL230
ReturnRider
Size, performance etc.. It was a problemless problem. I was relieved with reliable Brand. Gas leakage during sky blowing, Gas leakage during running, Gas leakage after long touring, rattling, noise etc.. , I think that it is a good product of pear at all. View detail
Fits: HONDA VALKYRIE, HONDA VALKYRIE, HONDA REBEL(-1999), HONDA HORNET250, HONDA NIGHTHAWK250, HONDA GOLD WING F6C, HONDA GOLD WING F6B, HONDA GOLD WING, HONDA GOLD WING, HONDA XR400 Motard, HONDA XR230MOTARD, HONDA XR230, HONDA XR200, HONDA XLR200, HONDA XLR125R, HONDA XL230, HONDA VFR800F, HONDA VFR800, HONDA VFR800, HONDA SL230
Standard product
I used it for Engine change. I bought four because it is 4 cylinder.
I think that Cost performance is also good as I bought it for less than 1000 yen.
It is good so far because there is no exhaust leak!
View detail
Fits: HONDA VALKYRIE, HONDA VALKYRIE, HONDA REBEL(-1999), HONDA HORNET250, HONDA NIGHTHAWK250, HONDA GOLD WING F6C, HONDA GOLD WING F6B, HONDA GOLD WING, HONDA GOLD WING, HONDA XR400 Motard, HONDA XR230MOTARD, HONDA XR230, HONDA XR200, HONDA XLR200, HONDA XLR125R, HONDA XL230, HONDA VFR800F, HONDA VFR800, HONDA VFR800, HONDA SL230
Trust KITACO
Since it is an inexpensive item, it became free shipping, so purchase
I think that there is no problem because it is probably not exhausted.
I can not do comparable subjects because I have never used other Manufacturer - - -
Even though it is not a rotten one, it is not a bulky one so you can stock as it is
View detail
Fits: HONDA VALKYRIE, HONDA VALKYRIE, HONDA REBEL(-1999), HONDA HORNET250, HONDA NIGHTHAWK250, HONDA GOLD WING F6C, HONDA GOLD WING F6B, HONDA GOLD WING, HONDA GOLD WING, HONDA XR400 Motard, HONDA XR230MOTARD, HONDA XR230, HONDA XR200, HONDA XLR200, HONDA XLR125R, HONDA XL230, HONDA VFR800F, HONDA VFR800, HONDA VFR800, HONDA SL230
[Webike Monitor] Are two pieces contained? Since Muffler outside carries out when fixing, it purchases. It is since exhaust leakage will be carried out if this is not made into a kitchen.
[Webike Monitor] Are
two pieces contained?
Since Muffler outside carries out when fixing, it purchases.
It is since exhaust leakage will be carried out if this is not made into a kitchen.
View detail