Reviews
Used in MONKEY125
It looks Black and cool.
I wanted to change the color of MONKEY125 Custom to Yellow and Black, so I chose it.
I wasn't too sure if it was effective, but the same MONKEY125 fellow It's a little nimble to start, isn't it? He said.
View detail
Fits: HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125
Dress-up parts?
……I don't care about the performance and fee-ring, it's just for self-satisfaction. The black color of the threaded part is scraped off by UNUT. I'm worried about Rust, so I applied Grease on it; View detail
Fits: HONDA monkey, HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY BAJA, HONDA GORILLA, HONDA GORILLA
I should have used Takekawa's Wheel.
The wheel from Mukawa has faded so I changed it to KITACO which is a bit cheaper. The construction of the product itself is considerably lower than the wheel made in Takekawa.:Pair (for Left and Right) Rim width is different and was slightly distorted. It's a pity, because there was no runout of Takekawa products. I heard that a little runout is acceptable but.... If I buy next time, I will not choose KITACO products for sure. View detail
Fits: HONDA ZOOMERX, HONDA APE 50, HONDA APE 50, HONDA APE 100 TypeD, HONDA APE 100, HONDA APE TypeD, HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR80, HONDA NSR50, HONDA NSF100, HONDA NS-1
Self satisfaction Parts
Installed on APE 100TypeDSpec Grease the front tire up to the point where the jack is placed under the belly to see if it will float or not The only thing to do is to replace the OEM
I was concerned that the Screw mountain comes out of the Nut about 10mm longer than OEM
When I try to run, I'm too slow to see any change at all
However, Chromoly& it's hollow, so I thought it was a good cosmetic
I'll replace the rear and swing arm pivot as well
View detail
Fits: HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125
Easily Customizable
The texture is still better than the OEM and it looks tighter and cooler
I felt a slight decrease in resistance, and it felt like it was moving lightly, and the body of the car was somehow firm I feel like I did
View detail
Fits: HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125
I'm not sure about the changes (^^;
All you have to do is replace the Axle Shaft with an OEM Axle Shaft, which takes less than 5 minutes
The OEM Axle Shaft is not coated with any Grease at all, so it will rust out in the future and It is expected to come Grease the Hollow Chromoly Axle Shaft that was replaced I installed it by hand
I didn't understand the tightening torque on the C125, so I've got the attached I tightened it up with the same numbers as the groms listed in the Instruction Manual
View detail
Fits: HONDA monkey, HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY BAJA, HONDA GORILLA, HONDA GORILLA
Parenthesis good!
I mean, the OEMs had iron chin in gold, but all the manufacturers had aluminum in their color KITACO is the only company that still has a lot of colors in stock while other colors are rare I found out that I would like to use Gold if I could, but I'm not sure if it's OEM-like It looks almost aluminum color, and even if it is sometimes blue-black, it is gold I'm very curious about the coloration of the Gold color I purchased this at Drumstick or at Drumstick The gold color I received was a very beautiful gold I think it's more of an orange-ish gold color
When installing, blend the front and rear hubs into a color similar to that of the Anodized Wheel PRO I got it painted After installation, the atmosphere of the motorcycle changes completely and it is very parenthesis well I'm satisfied with the results
For a while, I looked at it every day nitpicking
Actually, this Wheel was not purchased from Webike due to Point use! But you can find many references to color and other information on Impression here when you purchase I dared to post it here in the impresario I am sorry
View detail
Fits: YAMAHA CYGNUS X, HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125, YAMAHA CYGNUS X-SR, YAMAHA CYGNUS X-SR, HONDA glom, HONDA SUPER CUBC125
The Front has been replaced along with the Rear
The Axle of NORMAL is very iron, but if you make this product, the Black It goes in and feels tighter
The accuracy is also in its own way, and the right angle between the shaft and the surface of the contact surface comes out exactly
Unlike the high-end Manufacturer Coating, it looks and feels like It looks like BlackChromate, but you'll need to put a lot of pressure on the shafts to prevent corrosion during the assembly process Apply a thin layer of grease to the Screw and Flange You must be careful not to get any grease on the Screw and Flange surface Required
The nut side is a lock nut shape, so the color comes off only by tightening once The color of the Nut side is peeled off by only one tightening of the Lock nut
Overall, I find the finish to be good and cosy
On the Front side, the screw thread seems to be extra long (about 3-5mm)
View detail
Better texture than weight reduction
The Axle of NORMAL is very iron, but if you make this product, the Black It goes in and feels tighter
The accuracy is also in its own way, and the right angle between the shaft and the surface of the contact surface comes out exactly
Unlike the high-end Manufacturer Coating, it looks and feels like It looks like BlackChromate, but you'll need to put a lot of pressure on the shafts to prevent corrosion during the assembly process Apply a thin layer of grease to the Screw and Flange You must be careful not to get any grease on the Screw and Flange surface Required
The nut side is a lock nut shape, so the color comes off only by tightening once The color of the Nut side is peeled off by only one tightening of the Lock nut
Overall, I find the finish to be good and cosy
View detail
Fits: HONDA MONKEY, HONDA MONKEY BAJA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY BAJA
I am satisfied with Large change
I decided to give my Monkey a fresh coat of paint for the first time in 15 years, so I went with Wide tire and Replaced
I did not know whether to choose Silver or Gold, but it was the right choice for me to choose Gold as well as OEM! I think it is not difficult to assemble it as per the instruction manual I think that it is not difficult to assemble it if it is done according to the instruction manual I think you should have an impact wrench or something to help you remove the hub
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA Monkey Baja, HONDA GORILLA, HONDA MONKEY
Diverted to TLR250RFront, second purchase
I bought it a few years ago to reduce the weight of the front end and used it on my TLR250R I had some concerns because of the weight of the car and the different impact on the bike, but it works fine The price is very reasonable for Chromoly steel View detail
Fits: HONDA monkey, HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY BAJA, HONDA GORILLA, HONDA GORILLA
Cospa is nice
I'm happy with the power of it all!
Unlike the OEM Silver Painting, this is anodized and full of the gold genus My undercarriage has tightened up!
There are a few scratches on the reverse side, but I think it's good because it's not uneven If it is running, it is no problem because it will be scratched by rubbing with the tube sooner or later, and it will be scratched by detachment of Tire It's not on the table, of course
View detail
Recommended if you're looking for lightness
Both front and rear are replaced with Axle Color at the same time
It shouldn't be a lot of weight, but I'm not sure how much weight reduction under Spring is going to be It was my first time to experience it Especially Quantity:Pair (for Left and Right) I feel a lightness in the turnaround of The centrifugal force is reduced, like
Grom is good because it's a bit of a change
I was hoping for a stiffness boost as well, but I'm relieved to see a little less of the waist-crunching sensation that I had with the OEM The feeling has increased But maybe it's just my imagination here? Level of
It was surprisingly good
View detail
Fits: HONDA monkey, HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY BAJA, HONDA GORILLA, HONDA GORILLA
I would like you to ship it if possible
I chose Gold.
There are reviews that there is a difference in color before and after, but my was Large sturdy.
It shines well with bright Gold.
However, it will float on the OEM hub, so it is better to use a discized vehicle or a Gold OEM hub.
But Introduction Quantity : Since it is about Set, it may be better if Tire & Tube is already assembled.
Assembly of split Wheel is easy, but minimum tool and Inflator are necessary.
DIY If you are not used to it, you had better go carefully so as not to scratch a brand new item.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY BAJA, HONDA GORILLA, HONDA GORILLA
The golden rims
This gold rims brings life to my monkey bike, it’s like bling bling to me. I like the color and I love gold. It is lighter than the stock steel rims, everytime I used my bike my friends always notice the gold rims first and I love that. View detail
A little long
Fitment perfect using OEM washers on both sides, 5mm hollow shaft perfect for adding axle sliders. The axle shaft is probably 5mm longer than ideal but works great none the less. View detail
I do not know the change
We exchanged with KITACO's Axle Collar at the same time. On Specifications, Spring is lighter, but it is not understood by riding. OEM's Axle Shaft was cheesy Silver color so I am satisfied with just a visual change. Why do not you try it at the same time as exchanging Tire. View detail
Fits: YAMAHA CYGNUS X, HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125, YAMAHA CYGNUS X-SR, YAMAHA CYGNUS X-SR, HONDA glom, HONDA SUPER CUBC125
Finally I could exchange it!
There was no stock until now, it was finally possible to exchange. However, since ProductNo of this time is different from ProductNo of this time, it is better to confirm with KITACO's Homepage when purchasing! Since Front's exchange does not have STAND, wind up it on the roof material with strong carport Expression Ratchet as Quantity : I used 2pc, lifted it up by handlebar and worked. As I changed the Rear axle shaft the day before, I pushed FrontShaft out by using Rear axle shaft, applied Grease to Hollow Axle Shaft, exchanged Rear axle shaft from the other side and replaced it. Since Gap is generated when a load is applied at the time of extrusion, if you hold the Tire with one hand and adjust it, you can switch to Smooth. As forcibly proceeding work when a load is applied, it leads to breakage of the mounting part and damage of Shaft, so please refer to the person who is referred to at your own risk. Exchange is easy if substitution Shaft is available. View detail
Finally I could exchange it
There was no stock until now, but we finally could replace it as we resell it. This time, Rear axle shaft - I swapped Swing Arm Pivot Shaft. Before replacing, purchase the M12 - Size Long shaft at the mass retailer, use the M12 Long shaft, extrude the OEMShaft while gently striking with the Plastic hammer and push the M12Shaft from the opposite, when exchanging the Hollow Axle Shaft accomplished. The work itself is not difficult, but if you do not carefully work it will damage the Screw part of Swingarm and Hollow Axle Shaft, so please work on your own responsibility when using alternative Shaft. This time I exchanged Rear Sets at the same time. View detail
Fits: HONDA monkey, HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY BAJA, HONDA GORILLA, HONDA GORILLA
This is good..
【What made you decide the purchase?】 Required
- Tire I was curious about (DURO) There was a sense of shopping as it became a set.
- MONKEYOEMTire is about to reach the limit so I wanted to manage the running noise of the bucket tie.
【How was it actually used?】 Required
- The finish of Wheel is preeminent.
- The running sound is still quiet.
- It's definitely assembled because it's Set. And bargain!
- The knockdown is light, natural and there is no sense of incongruity. It seems that Front is OEMSize right answer. In addition, circumference is several millimeters smaller..
→ See Photo 1
- Compound is Softish, and it often seems that it will not go down aside from griping.
【Was it difficult to install? (Hard parts case)】 Any
- There are no particularly difficult things. Let's be aware of the rotation direction of Tire.
- Rear3. In 5J, 120-70-8 is also common, but this Set is 110-80-8. Payment is terrible.
See Photo 2
. By the way, since Clearance of Chain and Tire is 8 mm or more, I think that there is no interference first.
See Photo 3
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any
- If you work according to instructions for the first time, I think that you can assemble it. When the Bead of Tire does not adhere to Wheel, painting Bead cream makes it hard to stick when removing it. I substituted for CRC.
- Of course you do not have to worry, Wheel center is outgoing.
- There was some BALI in the hole on the Wheel mating face. Let's keep it for your safety.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?] Required
- Not particularly.
【Hope for Manufacturer - Please let me know if there are any improvement points】 Required
- At the same time I think that there are users who want to disc brake. So Tube's Valve should be able to choose a straight type, is not it.
- Valve on the front side Tube has a long discomfort. However, because there is a disc face hole at the position of Wheel 's Valve hole, if you install the Tube in the opposite direction, it seems that you can put out the L - Type Tube on the other side of the Wheel. (note : It is unconfirmed.)
See Photo 4
【Have you compared items?】 Required
- GCraft2. 75J+3. 5J
At the moment there is no schedule for Front disc brake, but when that happens Caliper will not be able to use brembo, so we chose this item with a reasonable price.
[Others] Any
It is Renewal goods of goods selling from long ago. I think that I do not regret purchasing.
This Recommendation.
* Optional items can be filled in as much as possible.
View detail