Reviews
Fits: HONDA NSR50, HONDA CRM50, HONDA NS-1, HONDA NS50F
Engine assembly in progress little by little
I am in the process of reassembling a NORMAL 3-disc to Reinforced Clutch. I am assembling a Normal engine that I bought second hand, making some modifications. It will be a while before I can actually ride it again, so I gave it a 4. I think it is generally good except for the cosmetics. View detail
Reinforced Clutch
After Bore up
Clutch fits perfectly without slipping.
View detail
Clutch upgrade for the Honda Monkey 143
Since upgrading the top end of my Honda Monkey engine to the 143cc kit and having a lot of kilometers on the OEM clutch I was looking for my next install project and thought the clutch would be a good idea. I researched and was going to use the SMR wet clutch kit but then Kitaco came out with this complete kit for a little extra dollare wise and went with this instead. Since I already have the Kitaco clutch lifter plate and 60% stiffer clutch springs this is all that was order for this maintenance task. On arrival the kit looks to be great but would have been better if Kitaco has drilled and tapped all six posts on the clutch pressure plate to support the six bolt clutch lifer plate that other brands supply. View detail
Fits: HONDA DAX50, HONDA solo, HONDA GIORCUB, HONDA SUPER CUB 50, HONDA CUB press 50, HONDA SUPER CUB 50, HONDA CUB press 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CHALY 50, HONDA MOTRA, HONDA XR50R, HONDA CRF50F
I think it's a good product
Quantity:2pc. This is the second set purchased
The vehicle that was last bored up.
Clutch slips when he kicks
I replaced it because it was there.
This time, the Bore up vehicle is again a Bore up vehicle.
Installed.
I think the product is well made.
It's also excellent in terms of cost.
I have no complaints in terms of performance.
View detail
Fits: HONDA DAX50, HONDA solo, HONDA GIORCUB, HONDA SUPER CUB 50, HONDA CUB press 50, HONDA SUPER CUB 50, HONDA CUB press 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CHALY 50, HONDA MOTRA, HONDA XR50R, HONDA CRF50F
It may be because of the Reinforced Clutch, but the ShiftShock is a little large
[Was there anything that disappointed you?
None in particular
Do you have any wishes or improvements you would like to make for the Manufacturer?
None in particular
[Do you have any products to compare it to?
None
What made you decide to buy?
If you want to change the oil pump to match the Bore up, you can do that too
How was your experience with it?
You need to SHIFT UP at a slow speed because the shock at the time of SHIFT UP is Large The ride is uncomfortable
Was the installation difficult?
With the Special Tool, it's easy
【Please tell me the installation point and hang】
Special Tool is required to replace it, and shifting is not a problem when the Cover is installed Don't forget to Check if you can do it
[Included Parts:were they on?
There is no shortage of what you need
[Others]
Clutch Cover Gasket is required separately
View detail
Fits: HONDA DAX50, HONDA solo, HONDA GIORCUB, HONDA SUPER CUB 50, HONDA CUB press 50, HONDA SUPER CUB 50, HONDA CUB press 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CHALY 50, HONDA MOTRA, HONDA XR50R, HONDA CRF50F
Firmly driven
i installed it on my solo Restore It was hard to remove the Gasket I installed it carefully for my car, from Crank to Chain, Tire and Direct The motive force is palpable View detail
Fits: HONDA DAX50, HONDA solo, HONDA GIORCUB, HONDA SUPER CUB 50, HONDA CUB press 50, HONDA SUPER CUB 50, HONDA CUB press 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CHALY 50, HONDA MOTRA, HONDA XR50R, HONDA CRF50F
Reinforced Clutch is good!
I installed the company's Bore Up Kit in CUB, so I bought it for the prevention of Clutch slip. A special tool is necessary for installation Center Lock Nut Wrench, Clutch outer holder is a necessity item! I wanted CrankGasket to be a set. Clutch outer cover's screw was hard and loosened using the Shock driver, but for use it is necessary to not give Drange to Crank, caution is needed. Although I tried earlier, the connection started earlier and when I switched to 2nd speed Front
View detail
Fits: HONDA DAX50, HONDA solo, HONDA GIORCUB, HONDA SUPER CUB 50, HONDA CUB press 50, HONDA SUPER CUB 50, HONDA CUB press 50, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA CHALY 50, HONDA MOTRA, HONDA XR50R, HONDA CRF50F
MD50, outside Clutch parts
Bore up MD50 with OEM Parts Number of MD 70.
However Clutch's capacity shortage caused clutch slippage, so Sludge clogged with Oil pump and the Engine crashed by Sludge wearing Gear Pump -.
I purchased KITACO 's Clutch this time for Firstfootpeg of this vicious cycle cancellation. When this product was installed and testRAN was done, it was able to accelerate the corner which had been stalling so far with the familiar Winding road which is used to the maximum Large + 10 km Speedup on the usual flat ground, so it is also + 10 km faster. This phenomenon occurs when Clutch weight is Quantity : 1 Set of 4pcs. Because it is heavy with seven, it feels like Torque fully if the Speed ??rides so that the high rotation elongation is good. The point is that you can run fast if you put on Speed.
View detail