Reviews
Fits: HONDA PCX160, HONDA PCX125, HONDA GB350, HONDA DIO110, HONDA GB350S, HONDA LEAD125, HONDA FORZA250, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125
Mounted on ADV160
At first I thought it was not necessary, but as I rode the car, the Engine stop became a hassle every time I took out the Side Stand, so I installed it.
It has become more convenient, although safety considerations must be taken into account.
View detail
This is plug and play.
If you want to modify your JC61 Grom , you need this imap controller & this plug and play harness. All instructions are in Japonese , but the imap controler "pigyback" the ECU , injector and TPS switch. You have 14 pre-sets and can save well over 60% cost saving on any other product avalible in Europe . Your original harness plugs into the KITACO & the Kitaco plugs into ECU , injector , Throtle position sensor, job done . They would easly have 5 stars with better instructions. View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA GB350, HONDA DIO110, HONDA GB350S, HONDA LEAD125, HONDA FORZA250, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125
Easy installation
Used on FORZA250 (MF15).
The removal and installation of the SIDEUnder Cowl took a long time, but the installation of this product was instantaneous.
This product is socketed on the Cable side and Vinyl Tape cured on the Side Stand side terminal.
I wish I had both Sockets anyway. I thought.
I was hesitant to cancel the side stands switch because it is an OEM function and a safety device, but as I continued to use my motorcycle, it became annoying to have the engine cut out to do a side stand, so I decided to purchase it if I could do it at a reasonable price. I decided to purchase it if I could do it at a reasonable price.
We believe it has become more convenient, although caution should be taken at your own risk.
There are some things that the person removing and installing the FORZA SIDEUnder Cowl should be aware of.
During removal and installation, the Screw is dropped and lost in the Cowl.
Cowl's Nail Fold
Scratches other cowls when installing cowls
That's all
View detail
Fits: Others For ADDRESS V125LED Blinker and LED Tail Lamp Kit made by KITACO
STREET MAGIC can be replaced in 5 minutes
I changed the Blinker to LED and it stayed on, so I replaced it.
It's between Headlight and MeterLeft, and no tools were needed!
If you do not reuse the conventional mounting rubber, the direction will be different and the wiring will not reach.
Blinker sound is now more subdued and blinks faster than before.
View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA BENLY50CD50, HONDA DAX, HONDA SUPER CUB 50
I used it on my AB26DAX.
I bought and used it when I installed the power advance full digitalCDI of DAYTONA to HondaDAX12V (AB26).
It is possible to convert from OEM 6-pole Coupler to 4-pole + 2-pole Coupler.
Just to make sure, I checked the Wiring color of the 6 pole side, but there was no problem with the color and the line, and I was able to install it as it was.
I found a similar product at Minimoto, but I was told that this product from KITACO fits DAX (AB26).
I chose this one because it was properly described.
The OEM CDI is hidden under the Battery case, Battery, Battery case.
It needs to be removed.
It seemed to be possible to make it by myself, but when I think about the purchase of Coupler and the confirmation of Wiring
I figured it would be more affordable to buy this product and I was right.
View detail
Fits: Others For ADDRESS V125LED Blinker and LED Tail Lamp Kit made by KITACO
KITACO Blinker relay for LED
I was trying to keep the wattage as low as possible.
APRIO has Relay under Meter
the reason is that ...
While replacing the Relay, the Front Blinker
LED.
Rear blinker is still there. "Ball."
YamahaOEM Product?
It's a sock.
It makes a chica chica sound.
I think it is a thankful product.
View detail
Fits: Others For ADDRESS V125LED Blinker and LED Tail Lamp Kit made by KITACO
Since the OEM relay is broken.
The OEM relay was broken, so I chose to use the Blinker LED as well. for ADDRESS V125, but I was able to use it on my 2-stroke ADDRESS V100 without any problems. View detail
You can use it in a moment
You can choose the thickness and the amount!
I think many people don't have much of a pin and wiring, but it's quite useful
Wiring of Oil drain
Grip Wiring
Exhaust System Wiring
Wiring of Caliper bolt
Wiring on boardCamera
etc., etc
This time, I would like to put the aluminum mesh on the Radiator core
But the Core lost, and Wiring wasn't really suitable for it, so we went to Tie Wrap Change (laughs)
DIZZY's Ear Cup is wire-covered in a container, so it is a very easy to use
If you open the lid and try to use it, it can all come out
So I use Drills to drill holes in the top of the lid so that I can get it out of there
A bit pricey, but the product itself is much better than the Home Center Needle Gold, so I recommend it It is
If you have Twister on the screen, you can easily do the wiring, so please give it a try! Please give me a copy
View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA BENLY50CD50, HONDA DAX, HONDA SUPER CUB 50
6V→ You may need to be careful with CDI installation that is converted to 12V.
It may have a slightly different use...
I have used GORILLA's 6VEngine in the past with the Outer Rotor Kit for CHALY of Takekawa to make 12V compatible.
The CDI used the HYPERCDI (05-03-0006) that came with the Kit.
I bought it to use the Power Advanced Full Digital CDI from DAYTONA.
The Engine does not start after installation, and no sparks have flown into the plug.
After a lot of research, for some reason the PinSign with 12VKit was different.
White wire on Black and Red wire on Black is opposite to the CDI for 12V.
I replaced the line of Conversion Harness here and it took Engine with no problem.
View detail
The price - - -
I bought it with IMAPSetting. (If you do not buy, you can not do anything) Although I download the manual from KITACOHP, I used 40 sheets of paper to PrintOut. I wanted you to IMAPBody Set. The Instruction Manual was easy to understand, I was able to communicate with PC and write to IMAP. View detail
Exchange as a result of Blinker LED
As a result of comparing with other companies' product, purchase here because there was a notation with LED correspondence. The terminal of our vehicle was 3-poleStraight Type but our product was 2-pole L-Type so we needed easy Wiring processing.
Although I could make it as a Bullet Terminal terminal, I wanted to use the car Both Sides Connector as it was, so I installed it using ConnectorKit of the same shape. Relay Body has B - L, so if you can figure out the car Both SidesWiring you can install it relatively easily.
There is a feeling that one TEMPO 13? Reacts late at the time of operation, but it does not matter much much.
Although it is our vehicle, because we are installing the Other Company ProductMeter and Indicator, even if we use LED Bulb before and after each, it does not become a blinking defect or high flasher, so each one works normally Purchased and it was Large Correct.. Because fixing also OEMRelay installation place was able to use as it was, we are satisfied with Large in light based on that point.
With expectation also in future durability, ☆ 4
View detail
Fits: Others For ADDRESS V125LED Blinker and LED Tail Lamp Kit made by KITACO
Blinker LEDization
In order to make Grom into an LED Blinker, I bought it because the Type that gave out sound was good.
Although the shape of the terminal is different, it was able to process satisfactorily without particular difficulties at the Flat Terminal.
View detail
Cospa is good!
As a result of comparing various kinds of Manufacturer sending out Lock wire, as a result, purchase this thing that COSPA was good and there is inventory!
If I try to find cheaper one, I sell cheaper and longer on the Home center something, but I do not like something because I bind naked bare naked.
The one with this Case fits neatly in the tool box.
By the way, if you put a drill on the top lid so that you can easily remove it, unexpectedly it is made of a hard material lid Crack ... ... that is disappointing there.
View detail
Fits: Others For ADDRESS V125LED Blinker and LED Tail Lamp Kit made by KITACO
It can also be used for ZOOMERX
I purchased Blinker to make it an LED. It is together with what the other person wrote, but for installation, it is not easy to process Wiring or the Relay Body is installed as it is, so keep it Tie Wrap etc etc etc. It is necessary to devise. If it is properly attached Blinker blinking also has no problem and it will prevent you from forgetting to erase it because the relay sound when it flashes.
By the way, there is no Relay sound at NORMAL. Recommendation to those who prefer Relay sound.
View detail
Fits: Others For ADDRESS V125LED Blinker and LED Tail Lamp Kit made by KITACO
Since it is small, IC Blinker relay in which there is sound of operation is found useful. It seems that some capacity Overs also operate.
Since it is small, IC Blinker relay in which there is sound of operation is found useful.
It seems that some capacity Overs also operate.
View detail
When iMap wearing was carried out, he wanted to come to adjust by himself too, and it purchased. This hand is rather difficult although the CARBURETOR can be easily felt by Jet exchange... Although drive in a number, and it is made deep or is made th
When iMap wearing was carried out, he wanted to come to adjust by himself too, and it purchased.
This hand is rather difficult although the
CARBURETOR can be easily felt by Jet exchange... Although drive in a number, and it is made deep or is made thin, compared with a carburetor, a difficult tendency has deep thin thing judgment... He is only unripe.
The direction equipped with
air/fuel ratio meter does not worry...
View detail
Fits: Others For ADDRESS V125LED Blinker and LED Tail Lamp Kit made by KITACO
Since a switching noise is silent although the relay of the other company was used by LED-ization by the chaly 12V The failure to erase etc. were frequent, and this product was found when it worried. They are those with a switching noise at budget pri
Since a switching noise is silent although the relay of the other company was used by LED-ization by the chaly 12V The failure to erase etc. were frequent, and this product was found when it worried.
They are those with a switching noise at budget prices!! ~ which is impression! Incidentally Although it is use blinker (15 LED) large scale, it is fully awesome.
Although it does not understand since durability is used and does not have between ...? For the time being!
It is a recommend.
View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA BENLY50CD50, HONDA DAX, HONDA SUPER CUB 50
It is a harness for attaching CDI of the monkey and an APE system to a cub, CD, etc. We use it in CD50. Especially attachment is easy only by attaching this to a pure main harness, without being difficult, and attaching CDI of the monkey and an AP
It is a harness for attaching CDI of the monkey and an APE system to a cub, CD, etc.
We use it in CD50.
Especially attachment is easy only by attaching this to a pure main harness, without being difficult, and attaching CDI of the monkey and an APE system.
Although pure CDI is fixed to the stay of a frame with the elastic band, since it becomes impossible to use it, it is necessary to devise fixation of external CDI by a cable tie etc.
View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA BENLY50CD50, HONDA DAX, HONDA SUPER CUB 50
Since Power REV was attached to a little cab, simultaneous purchase was carried out. Failure will not have an entire beginner 100%, either, since the wearing method is made to only blow between motorcycles with Power REV.
Since Power REV was attached to a little cab, simultaneous purchase was carried out.
Failure will not have an entire beginner 100%, either, since the wearing method is made to only blow between motorcycles with Power REV.
View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA BENLY50CD50, HONDA DAX, HONDA SUPER CUB 50
pure CDI of Ape -- a cub -- it used in order to use it for an engine. It can use besides external CDI. Since it cannot make from this price if connector and wiring each color is prepared by itself, aren't you inexpensive?
pure CDI of Ape -- a cub -- it used in order to use it for an engine.
It can use besides external CDI.
Since it cannot make from this price if connector and wiring each color is prepared by itself, aren't you inexpensive?
View detail