Reviews
Friends of Headlight Transplant
[How is it used?
The socket shape was different from the one used for the Headlight porting of another car model.
It fit into the terminal without any problem and finished beautifully.
Since it is conformed with a so-called "U" shaped triode terminal, items can be applied to a wide range of applications.
View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA Ape 50, HONDA Zoomer, HONDA Zoomer, HONDA solo, HONDA byte, HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY, HONDA DREAM50, HONDA JOKER90, HONDA ZOOK, HONDA JOKER Helmet, HONDA GORILLA, HONDA GORILLA, HONDA APE 100 TypeD, HONDA APE TypeD
APE 100
[How is it used?
Was the one you received as per Image? Yes
Was the installation difficult? No
How was your experience with it? Sounds good
[Included Parts:were they on? Stop lamp (Red)
[Was there anything that disappointed you? I wanted Gasket to be included.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI VERSYS650, KAWASAKI VERSYS1000, KAWASAKI NINJA650R, KAWASAKI NINJA650, KAWASAKI NINJA400R, KAWASAKI NINJA400, KAWASAKI NINJA250R, KAWASAKI NINJA1000, KAWASAKI NINJA ZX-6R(636), KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI Z800, KAWASAKI Z1000, KAWASAKI Z250, KAWASAKI ER-6F, KAWASAKI ER-4N
NINJA400R
RearBlinker lens of NINJA400R was replaced.
[Color] From Clear [Color] Just by being Smoke, the Rear view was tightened up considerably.
View detail
cracked glass
I purchased the Racer to make it a public road Spec.
We were looking for something not too expensive, but not too fragile and with good performance for off-road use.
I bought this one because Lens is resistant to cracking, and it looks pretty good.
The size is small so as not to spoil the silhouette of the car body, and above all, at this low price, even if the Lens is broken, there will be no damage.
View detail
Rectification Diode changed (Repost)
20240312Review
Initially, the selection of Diode was based on the wisdom of our predecessors (1N4148 100V200mA) But it broke, so I replaced it with an Emon one. I was worried because I needed 700mA for the NORMAL bulb and 900mA for the replaced bulb, but it was still no good. It was easy to work with. The diode itself is large and sturdy even with a weaker one.
↓ The following Review is a Diode change from the last one I posted.
good point
It seems to be small and unbreakable.
Maintenance is also easy, since the corresponding Valve can be purchased at Home center. (W number confirmation required)
A bad point
Single Bulb, so depending on the year, position modification may be required.
Bullet Terminal has Female and Male, so Large Mortgage Wiring needs to be processed.
Blinker relay in md44 must be replaced
Parts used
12 v10w13tValve×4
POSH Blinker Conversion Coupler Code Hondafor Front (18-19CB1300SF/SF-SP) ×Quantity:1pc.
・Emon (amon) Rectification Diode 6A Quantity:2pc. Set in 1556 ×2Pack (4 pieces in total)
Sumitomo Wiring Systems, Ltd. 050-type HCSeries2-poleFConnector2P050-HC-OR-F-tr ×Quantity:1pc.
Sumitomo Wiring Systems, Ltd. 050-type HCSeries2-poleFConnector2P050-HC-SB-F-tr ×Quantity:1pc.
Sumitomo Wiring Systems, Ltd. 050 type 1 pole F-side Connector1P050-WH-F-tr ×2co.
POSH) Motorcycle accessories Wide watt blinker relay (LED compatible) 3-wire Type 090011-WR ×Quantity:1pc.
Nut or Bolt, RubberWasheretc., number required
The included Valve is 12v8w10t and a little dark, so I changed it to 12v10w13t. The Valve generates a lot of heat, so I think you should inspect it carefully.
Front Blinker's Connector is "Made in USA" and I couldn't get it from Wiring.com.
For position processing, a rectifying diode is inserted in the position line and the turn signal line to prevent reverse current flow. If this is not done, the Indicator will remain on all the time.
I bought all the connectors for the rear blinker from Wiring.com. plus side connectors are in KITACO's ConvenienceParts, but minus side is not available.
The Rear bracket is a Fender Eliminator Kit from DRC, and the Front bracket is an appropriate Bracket that I found at Home center. I was surprised to find that it hooked up EXACTLY.
Blinker relay must be replaced. rally's blinker relay is for LED, but there is information that DRC's LEDFlasher is high flasher, so I thought I could use unbreakable lens with low w number, but it was not possible. I bought a used OEMRelay for md38 and it is a high flasher. It is better to buy ICRelay.
Posh's Blinker relay has a waterproof body, but the connector is exposed and needs to be treated. I wrapped it with tape from Vinyl housefor Repair.
View detail
So bad
Unfortunately, the Pin was in the wrong position and could not be installed. It was a waste of time. View detail
Off-road standard
good point
It seems to be small and unbreakable.
Maintenance is also easy, since the corresponding Valve can be purchased at Home center. (W number confirmation required)
A bad point
Single Bulb, so depending on the year, position modification may be required.
Bullet Terminal has Female and Male, so Large Mortgage Wiring needs to be processed.
Blinker relay in md44 must be replaced
Parts used
12 v10w13tValve×4
POSH Blinker Conversion Coupler Code Hondafor Front (18-19CB1300SF/SF-SP) ×Quantity:1pc.
UniversalSmall Signal High Speed Switching/Diode 1N4148 100V200mA ×4Co
Sumitomo Wiring Systems, Ltd. 050-type HCSeries2-poleFConnector2P050-HC-OR-F-tr ×Quantity:1pc.
Sumitomo Wiring Systems, Ltd. 050-type HCSeries2-poleFConnector2P050-HC-SB-F-tr ×Quantity:1pc.
Sumitomo Wiring Systems, Ltd. 050 type 1 pole F-side Connector1P050-WH-F-tr ×2co.
POSH) Motorcycle accessories Wide watt blinker relay (LED compatible) 3-wire Type 090011-WR ×Quantity:1pc.
Nut or Bolt, RubberWasheretc., number required
The included Valve is 12v8w10t and a little dark, so I changed it to 12v10w13t. The Valve generates a lot of heat, so I think you should inspect it carefully.
Front Blinker's Connector is "Made in USA" and I couldn't get it from Wiring.com.
For position processing, a rectifying diode is inserted in the position line and the turn signal line to prevent reverse current flow. If this is not done, the Indicator will remain on all the time.
I bought all the connectors for the rear blinker from Wiring.com. plus side connectors are in KITACO's ConvenienceParts, but minus side is not available.
The Rear bracket is a Fender Eliminator Kit from DRC, and the Front bracket is an appropriate Bracket that I found at Home center. I was surprised to find that it hooked up EXACTLY.
Blinker relay must be replaced. rally's blinker relay is for LED, but there is information that DRC's LEDFlasher is high flasher, so I thought I could use unbreakable lens with low w number, but it was not possible. I bought a used OEMRelay for md38 and it is a high flasher. It is better to buy ICRelay.
Posh's Blinker relay has a waterproof body, but the connector is exposed and needs to be treated. I wrapped it with tape from Vinyl housefor Repair.
View detail
No-frills, standard Blinker
Aside from being unbreakable, this is the strongest Blinker with a rustic design that doesn't look bad.
Recommended for those who do not need the extra design just because it is an outside Blinker.
Not only the lens but also the blinker body is rather flexible, so it is unharmed even if it is slightly shaken.
View detail
Fits: HONDA NSR50, HONDA NSR50, HONDA NSR80, HONDA NSR80, HONDA XR50 Motard, HONDA ZOOMER, HONDA ZOOMER, HONDA XR100MOTARD
ZOOMER is now nicer with a Small face. Satisfied so far!
About a week ago, I replaced the blinker of my 2011 WhiteSilver CB400SB with a Clear one, and it looked so solid and the old look was gone. [Color] I replaced it with ClearLamp. I also replaced Seat with a slightly fluffier one. I am very happy with the way it looks like a White horse.
So this time, I replaced the Blinker with a Clear one to refresh the White ZOOMER, which I have adored for many years.
Well, although I really like ZOOMER's twin-light, I don't like the shape of the blinker because it looks like an old lady scooter (because the blinker is square and slightly above the twin-light headlight), so for the past few years I have been replacing it with a round blinker that is as large as possible. I have been replacing the Blinker with one that is round and as large as possible. (Image:VANVAN90, 125, etc., and they are about the same height as the Light). but they were getting scratched and peeled off, so for a change of pace, I went back to the original OEM and went with Clear. But, well, I left the Rear as a Decamble Blinker.
The result is a very Small face. I feel refreshed.
However, I feel like I am back to the old lady Blinker again, so I will replace it with a big round Blinker when I get tired of it.
View detail
It's bright
It is bright enough, which is due to the CUB (C50) Headlight being too dark. View detail
Right size
Found this fog light attractive and the size is just nice to fix it on my MT09. It would be great if it's come with dual colour. Quality is excellent. View detail
Couplet-on and easy!
It is often said that the Light of CT110 HUNTER CUB is dark, but it is really dark.
When you enter a dark Tunnel from a bright place, such as an old Tunnel at night or even during the day, you can't see anything.
So, after considering the introduction of KITACOLED Shuttle Beam with Mukawa and KITACO's auxiliary light, they purchased KITACOLED Shuttle Beam.
Installation is completed by connecting the Connector such as Couplet-on and Switch to Headlight's Attachment power supply.
If anything, it took a little more time to remove the Headlight Connector and the power supply coupler.
I turned on the auxiliary light installed in the nighttime test,
Satisfied with the brightness of the front and both SIDE of the car body hand of the Normal headlight.
I am not sure about the durability as I am just starting out, but I am a little concerned about wet weather and washing the car as it was not marked as Completely Waterproof.
、
View detail
Transplant to XG250 TRICKER
Mounting bolts, wiring extension, mounting bracket, etc. were modified and ported to XG250 TRICKER.
The difference in valve resistance made it a high flasher, but the Small blinker made it Stylish.
View detail
CT125 Auxiliary Lamp
Finally installed the auxiliary Lamp.
CT125CT110 HUNTER CUB Light is dark ...
If possible, it would be nice if there was a standard product that would allow the LEDs inside to be replaced,
If the entire reflector and headlight unit are replaced in accordance with the H4 standard, the cost of the gold is not unreasonable.
So there is Kit from Mukawa and KITACO, which has a proven track record in auxiliary Lamps from various companies,
Decided to go with the less expensive KITACO product.
If you install USB power supply and Auxiliary Light together in Attachment power supply, the voltage capacity will be Over.
Remove the USB power supplyConnector that has been attached.
About, SmallInstalled in about an hourCouplet-on and easy to work with.
Installation is completed in Large form.
All installation is completed when the irradiation test and angle adjustment is done at night.
As for durability, we will see.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA CROSS CUB50, HONDA CROSSCUB110
KITACO KITACO Blinker Lens Set
More tasteful than Plating Valve. Installation is easy. The only tool used was a screwdriver. View detail
Fits: HONDA SUPER CUB110 Weather Child ver., HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA CROSSCUB110, HONDA CROSSCUB110 KUMAMON ver.
KITACO KITACO Tail lens set
The rear view has been tightened. Installation is easy. Tools used were Driver and Cutter Knife. View detail
Fits: HONDA Ape 50, HONDA Zoomer, HONDA Zoomer, HONDA solo, HONDA byte, HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY, HONDA DREAM50, HONDA JOKER90, HONDA ZOOK, HONDA JOKER Helmet, HONDA GORILLA, HONDA GORILLA, HONDA APE 100 TypeD, HONDA APE TypeD
Darker than stock
Nice red taillight lens that is darker than stock, still lets enough light through to be seen but dark when taillight is off View detail
Unbreakable lensMINI for installation
L-shaped AngleBracket.
You can also buy them at Home center.
I purchased this product to install KITACO's Unbreakable lensMINI.
I feel a little better when I have it all at KITACO.
That's about it.
It looks a little better than the later Home center Angle.
If price is a priority, Home center is the product of choice.
View detail
For Fog Lamp of CRFRALLY50
I wanted to add a Fog Lamp to my CRFRALLY50 because I can't see the Corner at all when driving at night in the mountains.
At first, I was going to buy a RALLY50-specific product, but I couldn't wait for more than 6 months (and it was too expensive!). I thought about buying a low-priced product from Amazon, but I decided to go with a trusted manufacturer's product and bought this one!
The yellow color is the only color available when it comes to Fog Lamp, so there was no hesitation.
The engine guard is installed on our RALLY50, so we were able to install it on a very good part of the car.
As for the Bracket, I purchased one from Amazon that seemed to fit.
When attaching the Handlebar to the Quantity:Pair (for Left and Right) I was able to install it with the Limit not hit with the cut off to
View detail
Fits: KAWASAKI VERSYS650, KAWASAKI VERSYS1000, KAWASAKI NINJA650R, KAWASAKI NINJA650, KAWASAKI NINJA400R, KAWASAKI NINJA400, KAWASAKI NINJA250R, KAWASAKI NINJA1000, KAWASAKI NINJA ZX-6R(636), KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI Z800, KAWASAKI Z1000, KAWASAKI Z250, KAWASAKI ER-6F, KAWASAKI ER-4N
pleasant feeling
Used for zrx1200 ZrX1200 DAEG2016MODEL.
Replacement can be done with a single Driver.
It's easy to do and looks quite different, so I think it's cost-effective.
View detail