Reviews
Unbreakable lensMINI for installation
L-shaped AngleBracket.
You can also buy them at Home center.
I purchased this product to install KITACO's Unbreakable lensMINI.
I feel a little better when I have it all at KITACO.
That's about it.
It looks a little better than the later Home center Angle.
If price is a priority, Home center is the product of choice.
View detail
Moderately Large
Satisfied with the Large size!
However, because of the rubber construction, if it is tightened too much, the blinker will start to point outward.
View detail
It makes it look tighter.
I bought the NORMAL Orange colored Blinker because it was too cheap.
The supplied Orange-colored bulbs did not look good when the lights were off, so I painted them Silver myself and installed them.
When the light is off, it is firmly in Monotone.
View detail
Fits: HONDA SUPER CUB110 Weather Child ver., HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA CROSSCUB110, HONDA CROSSCUB110 KUMAMON ver.
Tail lamp
Bolt to Quantity:It was an easy replacement just by loosening 2pcs.
I think it looks better.
View detail
one's feeling when wearing something
It feels like it sticks out more than expected.
The same size as the OEMBolt is considered Beauty.
View detail
A bit reminiscent of the good old days of Headlight!
[How is it used?
Normal headlight case was replaced due to poor parenthesis.
Parenthesis is better for Meter outings.
Was the one you received as per Image?
Headlight is smaller than I expected, but it was almost exactly as in the image.
Was the installation difficult?
The wiring had to be disconnected and reconnected, and the grounding wire was quite large and odd.
How was your experience with it?
I think it was good to have a good old Cafe racer style atmosphere.
The brightness is the same as NORMAL; it might be a little brighter if the Valve is replaced.
[Included Parts:were they on?
Valve and Wiring are Quantity:Set, but nothing else in particular.
[Was there anything that disappointed you?
At the time, the multi-reflector type was in vogue, so it was a bit tacky, no?
▼We eventually replaced it with a Multi-reflector type, but the quality of this Headlight was better in terms of durability and luxury.
View detail
Fits: HONDA Ape 50, HONDA Ape 50, HONDA Joker90, HONDA monkey, HONDA monkey, HONDA JOKER Helmet, HONDA GORILLA, HONDA APE 100 TypeD, HONDA APE 100, HONDA APE TypeD
Clear Exchange
To change the look of the lens, we replaced it with a Clear Lens.
It turned out just as I expected, refreshing and looking good.
I hope it will be cheaper to sell Lens only.
View detail
I think we have enough.
I bought this because I needed it when I relocated my Blinker.
I bought two of the same ones, but in different colors.
The price is cheap and it shines, so I thought it would be enough.
View detail
This Valve is 12V/10W, but the protrusion of the mouth Gold is different angle 150 degrees!
Please refer to this Review before you are disappointed.
Although the image is confusing, the projection at the mouth gold of this product is "150 degrees at different angles." Yes, sir!
The picture was confusing and I bought it thinking it was a 150 degree angle but when it arrived it was a 180 degree projection.
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA little cub, HONDA little cub, HONDA little cub, HONDA DAX, HONDA SUPER CUB 50
It looks good!
I think it looks so much better now!
I think it's good that the price is reasonable and you can easily get your hands on it without having to worry!
But...! (Polish) I've never used a Wedge Bulb before, so I didn't know how long it would last, but I thought it would be quicker than the NORMAL bulbs, but I guess it's still −! (Polish)
And if you buy it, the price is about twice as much as the NORMAL ball, and the running cost is − (;´д)
And when I went to buy the bulbs, I saw that the LEDs were twice the price of the Wedge Bulbs! (´ωTranslated.)
That's cheap considering the lifespan. The best of the best! I bought it on the spur of the moment!
I got home in a ruff and changed it and all it did was turn on Position!
It doesn't glow when I try to Brake it! (;´д)
I looked it up and the polarized one won't work on a car, let alone a SUPER CUB! ((T_T) )
My motto is "High efficiency at a low price! I'm a guy whose motto is "cheap and efficient! ( ̄□ ̄;) !!!
I'll come home at night and change it!
………………
View detail
Recommended for OffRoad riders
I always ride my HUSQVARNA TE250 for off-road fun, but when I was knocking down motorcycles in the mountains, my Blinker went away (tears).
So, I was looking for a Blinker with a small pattern that would be hard to hit the ground even if the Motorcycle fell down. So, I consulted with my Off-road friends, and they told me that there is a small blinker called Unbreakable lens that is hard to break, and when I checked on WebBig, I found this product. I bought it as soon as I could.
This time, only the Rear side is 1Quantity as a trial.:It buys it with Set. I cut the original Wiring with Nipper, made Bullet Terminal, and connected it with KITACO's Wanz MINIBlinker Set. It came to shine safely.
I installed them using the holes that the OEM ones came with, so I didn't have to drill any holes in the body of the car, and the overhang is less than the OEM ones, so I think it's a little harder to hit the ground even if you fall.
I chose it mainly because I don't drive in town or on public roads (I only drive on public roads a little bit when I move around), so I was very satisfied with the Performance.
This Blinker is a great recommendation for anyone who runs Off-road and has a Blinker.
View detail
Fast forward and the Lens is gone!
I always ride my HUSQVARNA TE250 for off-road fun, but when I was knocking down motorcycles in the mountains, my Blinker went away (tears).
So I was looking for an external Blinker with a small pattern that would be hard to hit the ground even if the Motorcycle fell. So I talked to my Off-road buddy and he told me that there is a small blinker called Unbreakable lens that is hard to break, so I checked on WebBig and found Unbreakable lensMINIBlinker Set.
This time, only the Rear side is 1Quantity as a trial.:It buys it with Set. I cut the original Wiring with Nipper, made Bullet Terminal, and connected it with KITACO's Wanz MINIBlinker Set. It came to shine safely.
I installed them using the holes that the OEM ones came with, so I didn't have to drill any holes in the body of the car, and the overhang is less than the OEM ones, so I think it's a little harder to hit the ground even if you fall.
And I immediately went to Off-road the next day, but after a day of running, both Rear blinker lenses I installed were gone (tears).
So I bought the Lens only one here.
Next time I'll use Tape to hold it in place so I don't lose it.
I felt that it was probably a devious attempt by the Manufacturer to make money on the Lens by designing it to come off.
View detail
Fits: KAWASAKI KLX250, KAWASAKI NINJA2 Helmet50RR, KAWASAKI D-TRACKER-X
If only it were a little cheaper
Ninja250R Initial Model has a special Blinker Bracket.
It is difficult to install the Blinker of Other Brand Product.
Most of the UniversalBlinkers have a 10mm screw diameter.
Blinker Bracket for Ninja250R is 8mm in size.
Forced installation will be required.
So I decided to use the Smoked lens, which is easy to change.
It's only Lens but the price is very high.
View detail
Installing Harness in the Headlight is tricky.
I installed it on a car with Honda emblem and Down fenderKit.
Wiring is simple, just interrupt the Main switch3PCoupler and connect the Wiring from the LED Shuttle Beam.
However, it's going to be hard to say that this is the beginning of the Large change, or almost impossible.
The Coupler is installed in the Headlight, but we have to put the Coupler where there is no space to begin with.
It doesn't go in. The thing is good, but unfortunately I removed it.
View detail
Fits: YAMAHA Jog Z, YAMAHA Super Jog ZR, YAMAHA SUPER JOGZ, YAMAHA JOG (2Cycle)
3 stars because the parts have not arrived
As I replaced the headlight lens with a new one, the blinker lens is also I ordered this to replace it with Clear Lens As soon as I get the parts, I'll re-improve it! View detail
Fits: YAMAHA Jog Z, YAMAHA Super Jog ZR, YAMAHA SUPER JOGZ, YAMAHA JOG (2Cycle), YAMAHA JOG (2Cycle)
3 stars for before use
As I replaced the headlight lens, I also replaced the blinker lens [Color] I ordered it to be Clear I haven't received the parts yet, so I'll reimpress as soon as they arrive! View detail
We invite you to join us
When turning Left and Right on the road
I was worried that the blinker would be visible like the OEM product
、
There was no oncoming traffic or other situations that led to a particular traffic accident
View detail
Thailand hen satisfied.
Since the STD has only the part of the bulb from the lamp, its Largeness (length) I thought that it was not necessary, so I replaced it but it was too expensive.
Exchange is quite troublesome. (It is a problem with the vehicle)
View detail
Light does not complain about itself ? ?
Color : Yellow as Quantity : 2pc. Set installed. Wiring was struggling with where?. Wiring is PROTEC Protec : 11607 BDR-110 BAT. Direct Relay Switch Kit (12v10A) , Switch is KIJIMA KIJIMA : 304-616
I bought a lamp switch. ProTech BAT direct relay is not fitted with the length of the wiring at all, it has become full of patches, which is different depending on where you put it ? ?. Relay ⇒ switch ⇒ key on to 12V (+) Although it was described as, it is 12 V with key ON (+) I did not know where to connect, but when I asked Protech, "It is good to take it from the tail lamp" I was taught. Honda's bike, but there are three lines of green, yellow, yellow + green, of which we successfully connected to yellow. Where do I install it? I attached it to the motorcycle named ZOOMER - X, but unplug the bolt at the top of the turn signal and set the diameter 1. 6 cm, length 1. Bite the 5 cm aluminum stay to the light so as not to interfere with the cowling.
View detail
Is it the initial malfunction of the product or the trouble of the vehicle ...
I mounted it using Light's Wiring that I used to date.
After installing, running for about an hour and not putting on embroidered, it will not go on as it is.
View detail