Reviews
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
I put it on to prevent scratches on the Meter Lens.
[How is it used?
Purchased to prevent scratches before they occur as I am buying a new car.
Was the one you received as per Image?
The product was exactly what I expected.
How was your experience with it?
I think it is effective because it is not hard to see after it is applied and there is a certain amount of heat.
[Points to note]
The meter itself has a slight radius (curved surface), so it is best to apply it with care.
I was very careful, but I let Air hair ・・・・ I crushed the air bite, but it was a little hard to see, so I waited and made a mistake.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I would like to ask the manufacturer to include a small paper for removing oil and grease, as I know some people do not have one.
View detail
KITACO Speed Pulse Conversion Unit (Installed on JC92 U.S. Spec.)
About quality and texture - Quality is ok. Difficulty of installation - Installation was easy. About shipping and packaging - Well packed and secured. Any concerns, cautions, or advice when purchasing - Only concern i had was getting to the setting mode and i couldn't get it to power up. On instruction manual the Optional Connector is actually what powers up the device to get to setting mode. My grom is purchased in the U.S. it may be different with the Japan spec. as i couldn't find the power supply connector harness on my bike. I was able to just tap the power supply through the rear lighting and got it to power up and set up to my bike specs. View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
There's no way out of air.
I did it with a good amount of detergent and plenty of Kiribuki, but I couldn't get the air bubbles out. View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
KITACO Meter Protective Film
It was good to find a quality product that was simple to install. I will buy it often in the future. Thank you for the meticulous packaging and sending. View detail
Fits: HONDA CRF250L, HONDA CRF250RALLY50, HONDA glom
I can't help but notice the small Dust ….
There is no problem at all with the product itself, and I think it is a very good product if it is applied perfectly. When pasting, I degreased and wiped the surface in advance, and then gently aligned the product while pasting it.
The purpose of this product is to protect the surface of the Meter from scratches, etc. I would like to use it. I will use it as a protection for the surface of the Meter from scratches.
View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
KITACO MeterFilm MONKEY125
The installation position is Exactly, high quality, and I am satisfied with it. View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA Compatible with normal top bridge and aluminum top bridge made by KITACO
Speedometer, which is difficult to read, is now easier to see.
The OEM Meter location is hard to see and the Main key is difficult to find because of the digital tacho attached.
It was difficult to operate, so I changed it while replacing the LightAssy,
Fixing Meter is Material:Since it is only a Rubber Pipe, there is a slight concern about deterioration.
Style-wise, it's generally as I expected, but the key cylinder is a bit exposed.
I'm curious to see if something can be done about it.
View detail
It is covered with scratches.
Installed to protect the Meter panel.
It is unfortunate that Film is so easily scratched and the line scratches are all over just wiping off the dust.
I would like to see an improvement in the Material to make it less vulnerable.
View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
Good flim
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
Fits: HONDA CRF250L, HONDA CRF250RALLY50, HONDA glom
If it was a new car, you'd put it up.
I didn't know there was such a good product.
I'll put it up before I cry about it with Wound.
I water pasted it, but had to redo it several times due to slight Gap.
I was told that there was a protective Seat on the surface and tried desperately to remove it, but there was no protective Seat. 。 Manufacturer seems to have taken action.
View detail
Fits: HONDA CRF250L, HONDA CRF250RALLY50, HONDA glom
It's a brand new car.
I purchased this to prevent scratches on my Meter panel.
If you can apply Smartphone film, you can install it without any problem.
Besides, it is consumable, so if it gets damaged, just replace it. Use it.
View detail
It is rather easy to paste!
I am glad that it was easier to apply than I expected! View detail
It is indeed an exclusive product!
The cable length was not excessive or insufficient for the wiring work, and the reflection was very smooth.
With a little effort, the cable ties used on the car body (with a Knob to open the latch) can be used together with the existing wire harness to make it more Refreshing.
Unfortunately, there is no Cover for SpeedSensorConnector.
Even if it is not a functional problem, the OEM comes with a Cover, which I would like as a Street youth.
If only this had been the case, it would have been a perfect rating.
The setting operation is a combination of short and long presses of a single Button, but the Timing for display switching and the time setting for darkening are good, and I was able to operate it without hesitation.
View detail
Fits: HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
Speedometer
Used for MONKEY. I bought it because the OEM was not long enough to make a double Meter. The length is just right. View detail
Helpful for error correction
These parts are appropriate for compensating for speed errors caused by changes in the number of sprocket pins or tire size.
The system was usable with simple installation.
View detail
Too soft.
After applying the film, I tried to lightly push out the air bubbles with my fingernail to release them, but the film was clearly scratched. View detail
Helpful for error correction
Parts that should be in the correction of speed display errors due to changes in Sprocket's Ding number and Tire size.
Installation, adjustment, etc. was easy.
View detail
ThailandSpec. users should be aware of this.
ThailandSpec. does not have a coupler for extracting power, so modification of the wiring is required for installation.
I cut off the coupler of the product and put a red wire to the BlackWhite terminal coming out of the red coupler next to the battery, and I cut off the coupler of the product and put a red wire to the BlackWhite terminal coming out of the red coupler next to the battery. (Plus) I connected a black wire to the Minus terminal of the battery. The work itself is not difficult, so I think it will be fun to try it. Have a good Grom Life!
View detail
Grom JC92 required for Tire replacement
Groms for TT or Michelin CITY125Grip2.
Plus error is too Large when I change the shoes, so this is a must.
You should adjust the speedometer by comparing it to the speedometer on your phone.
View detail
Can be used as Repair Parts for CB50S!
[How is it used?
The OEMSpeedometer Cable for the CB50S broke over time and I was at my wit's end. I was informed that it was compatible with the Cable for the MAGNA50, which led me to purchase it.
How was your experience with it?
I was concerned about the length of the Cable, but it is acceptable. The shape is slightly different from the OEMCable of CB50S, but it works fine.
How did it compare to other products?
We are grateful for MAGNA50's Other Brand Product, because there are some Long Type and Mesh Type products, but there are surprisingly few OEM Type products.
[Points to note]
Cable routing is slightly longer. In my case, I installed a meter that was used on another car, and it was installed in an upward position, so it was an exact fit.
▼Meter cables will break at some point, so I appreciate the Repair Parts.
View detail