Reviews
Friends of Headlight Transplant
[How is it used?
The socket shape was different from the one used for the Headlight porting of another car model.
It fit into the terminal without any problem and finished beautifully.
Since it is conformed with a so-called "U" shaped triode terminal, items can be applied to a wide range of applications.
View detail
It is inexpensive and additional purchases are recommended!
Connect to Power Outlet Harness and power to Quantity:2pcs taken out.Quantity on Front:Pair (for Left and Right) It is useful to connect Daylight's Wiring. View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250M, HONDA CRF250L
Can be installed without modification.
It can be easily installed inside the LeftCowl of a 2023 CRF250RLY50.
I crawled Daylight's Wiring from there and the cord was short and convenient.
View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
I put it on to prevent scratches on the Meter Lens.
[How is it used?
Purchased to prevent scratches before they occur as I am buying a new car.
Was the one you received as per Image?
The product was exactly what I expected.
How was your experience with it?
I think it is effective because it is not hard to see after it is applied and there is a certain amount of heat.
[Points to note]
The meter itself has a slight radius (curved surface), so it is best to apply it with care.
I was very careful, but I let Air hair ・・・・ I crushed the air bite, but it was a little hard to see, so I waited and made a mistake.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I would like to ask the manufacturer to include a small paper for removing oil and grease, as I know some people do not have one.
View detail
KITACO Speed Pulse Conversion Unit (Installed on JC92 U.S. Spec.)
About quality and texture - Quality is ok. Difficulty of installation - Installation was easy. About shipping and packaging - Well packed and secured. Any concerns, cautions, or advice when purchasing - Only concern i had was getting to the setting mode and i couldn't get it to power up. On instruction manual the Optional Connector is actually what powers up the device to get to setting mode. My grom is purchased in the U.S. it may be different with the Japan spec. as i couldn't find the power supply connector harness on my bike. I was able to just tap the power supply through the rear lighting and got it to power up and set up to my bike specs. View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI ST250, SUZUKI katana, SUZUKI GSX-R1000
GSX-S125 2023 has differences such as Wiring allocation
[How is it used?
Installed on a DL32D GSX-S 125 2023, used to take out ACC power from a DAYTONAD-UNIT WR. (I plan on wiring the D-UNIT WR with Fog and Others additional power system)
Was the one you received as per Image?
No problem.
Was the installation difficult?
When installed on a 2023 model (DL32D), the ACC (+ wire for Attachment) and GND (Grounding Wire) of this product are reversed. In my case, I connected the ACCPower Cord of D-UNIT WR to the GND wire.
Also, in the 2022 and earlier models, a blind lid was attached to the connector on the body side of the GSX-S 125, and there was no connection beyond that point, but as shown in the photo (…) in the 2023 model, another connector was connected beyond the connector on the body side, and the wiring seemed to extend beyond that point. As you can see in the photo (…), in the 2023 MODEL, another Connector is connected to the end of the Connector on the Body side, and Wiring seems to be extended to the end of the Connector.
Therefore, we disconnected the OEM's Connector and inserted our product between them.
How was your experience with it?
The objective of getting ACC power was achieved without any problem.
[Included Parts:were they on?
users' manual
[Was there anything that disappointed you?
Not particularly
Some may consider this product to be price sensitive, but I think it is a good choice because it can be quickly returned to NORMAL when sold.
View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA Ape 50, HONDA Zoomer, HONDA Zoomer, HONDA solo, HONDA byte, HONDA monkey, HONDA monkey, HONDA MONKEY BAJA, HONDA MONKEY, HONDA DREAM50, HONDA JOKER90, HONDA ZOOK, HONDA JOKER Helmet, HONDA GORILLA, HONDA GORILLA, HONDA APE 100 TypeD, HONDA APE TypeD
APE 100
[How is it used?
Was the one you received as per Image? Yes
Was the installation difficult? No
How was your experience with it? Sounds good
[Included Parts:were they on? Stop lamp (Red)
[Was there anything that disappointed you? I wanted Gasket to be included.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
![[K TOUR] USB Power Kit](https://img.webike-cdn.net/catalogue/images/114309/80-757-13200_1_TS.jpg)
Easy to secure power supply
It is an excellent and easy way to secure power. View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
There's no way out of air.
I did it with a good amount of detergent and plenty of Kiribuki, but I couldn't get the air bubbles out. View detail
Fits: KAWASAKI VERSYS650, KAWASAKI VERSYS1000, KAWASAKI NINJA650R, KAWASAKI NINJA650, KAWASAKI NINJA400R, KAWASAKI NINJA400, KAWASAKI NINJA250R, KAWASAKI NINJA1000, KAWASAKI NINJA ZX-6R(636), KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI Z800, KAWASAKI Z1000, KAWASAKI Z250, KAWASAKI ER-6F, KAWASAKI ER-4N
NINJA400R
RearBlinker lens of NINJA400R was replaced.
[Color] From Clear [Color] Just by being Smoke, the Rear view was tightened up considerably.
View detail
Fits: HONDA SUPER CUB 50Standard, HONDA SUPER CUB110, HONDA SUPER CUB110Standard
Easy installation for everyone
The point that anyone can easily install is good. However, when removing the body of the SUPER CUB, the part that comes in contact with the SUPER CUB is
If you cure with tape in advance, you can avoid putting wounds on the surface.
View detail
cracked glass
I purchased the Racer to make it a public road Spec.
We were looking for something not too expensive, but not too fragile and with good performance for off-road use.
I bought this one because Lens is resistant to cracking, and it looks pretty good.
The size is small so as not to spoil the silhouette of the car body, and above all, at this low price, even if the Lens is broken, there will be no damage.
View detail
For power supply for the driver's recorder and smartphone.
For power supply for the driver's recorder/smartphone. It is not difficult to do if you have a tool that can reach deep enough. View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, SUZUKI Zixxer 250 SF, SUZUKI Gixxer 250, SUZUKI Gixxer 150., SUZUKI GSX250R, YAMAHA SEROW250, YAMAHA YZF-R3A, YAMAHA YZF-R3A, YAMAHA YZF-R3, YAMAHA YZF-R25A, YAMAHA YZF-R25A, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-25
Ideal for Attachment power supply extraction
Ideal for taking out Attachment power supply
DL1000 V-STROM250SX is designed to be easily inserted into a connector of the same shape by removing the cover under the tandem seat to reveal the connectors.
I think this is a good product because power can be removed without damaging the Wiring.
View detail
Fits: YAMAHA YZF-R3, YAMAHA MT03, SUZUKI Zixxer 250 SF, SUZUKI Gixxer 250, SUZUKI Gixxer 150., SUZUKI GSX250R, YAMAHA SEROW250, YAMAHA YZF-R3A, YAMAHA YZF-R3A, YAMAHA YZF-R3, YAMAHA YZF-R25A, YAMAHA YZF-R25A, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-25, YAMAHA MT-25
Kitako Power Extraction Series!
Is it for SEA BASS/Yamaha?
I purchased this for my VSTROM250SX.
If you look for a lump at the bottom of the Rear Sets, you will find a Connector, which you simply remove and insert this Adapter between the Rear Sets.
It is very easy Exclusive Design!
View detail
CT125 was not supported.
I bought it with the naive hope that it would fit ServiceCoupler, but it did not fit at all.
I used only MarkTube, Bullet Terminal and Wiring and discarded Coupler.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CROSS CUB, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO
USB power supply for Motorcycle
I bought it because I have a Smartphone Holder and wanted a USB power supply as well.
22Φ mounted on a Handlebar.
With Waterproof Cap.
View detail
Fits: HONDA MONKEY125, HONDA DAX125, HONDA CT125CT110 HUNTER CUB
KITACO Meter Protective Film
It was good to find a quality product that was simple to install. I will buy it often in the future. Thank you for the meticulous packaging and sending. View detail
ODBAdapter
Connect to SMART phone to see Motorcycle information. RPM, etc. View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB500X, HONDA REBEL250, HONDA REBEL250, HONDA FORZA-Z, HONDA FORZA-X, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA VTR, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125
Easy power extraction
I put this on my 2023 CB1300SB and was able to connect it without removing the rear cowl. The price is reasonable and I am glad I bought it. View detail