Reviews
Fits: HONDA MONKEY125, HONDA MONKEY, HONDA SUPER CUB, HONDA glom, HONDA CUB, HONDA NSR80, HONDA NSR50, HONDA NS-1
Used on JC75 Grom. Probably only one turnout.
When replacing the clutch cover on the Grom, the centrifugal filter has to be removed, but without this I was reluctant to purchase it because I could not remove the nut that is deep in the clutch cover.
The Ratchet plug is 12.7mm, and the one I had was only 9mm, so I purchased a Conversion Adapter separately.
The length of this Adapter just reached the insertion hole, so we did not need to use Extension.
Once the centrifugal filter is removed, this part is no longer needed.
View detail
Replacement of aged well nut
The well nut used to hold the screen in place had deteriorated over time and had become chica-chica, so we replaced it. I am not sure if the old well nut was OEM or external, or how long it had been in use, but it seemed to have been in use for quite some time, and had hardened, leaving it in a tightened shape that made me think it might have been over-tightened.
In this case, we chose KITACO's product, which is less expensive than OEM's. The number of KITACO's product was 5 pieces, whereas we needed 6 pieces, so we used 2Quantity:I purchased a set. I think the number of units needed depends on the type of car and the location where it is used, but I don't think that 5 units are needed very often. Well, it is still cheaper than buying 6 OEM ones.
There is nothing particularly difficult about the installation, but removing the hardened old well nut was a large challenge, and we had to be careful not to damage the cowl by using radio pliers and picks. Once the old ones were removed, all that was left was to put the new well nuts through the cowl holes.
I installed it, and there is no particular problem, but in the review of other people who used this product on daeg, the size was Exactly to the Cowl depression, but on zrx1100, the diameter of the Well nut umbrella was a little small in relation to the Cowl depression.
As a matter of course, the new Well Nut will protect the Screen from vibration because the Rubber is newer and therefore more flexible.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY, HONDA SUPER CUB, HONDA glom, HONDA CUB, HONDA NSR80, HONDA NSR50, HONDA NS-1
Required for GROM Centrifugal Filter and Clutch maintenance.
This is a special tool without which it is impossible to disassemble the Clutch.
Parenthesis, or SST at best.
Even Single Body has a hole in the side, so you can use it if you stick a round stick or something.
If you use Ratchet, the insertion angle is 1/2-inches (12.7mm), and you can't use it without Extension bar because of the depth.
I know Impact says it's not available, but 1/2, then I wanted it to be 9.5mm.
View detail
Quality is the same as OEM.
I've been using well nut for Cowl and Screen, and I replaced it when I got old and Rubber started to get crispy. View detail
Fits: HONDA CB Series, HONDA XE series, HONDA APE 100, HONDA APE 50, HONDA KITACO cylinder head compatible, HONDA SUPER CUB 50, HONDA DIO(4Cycle), HONDA TODAY, HONDA MONKEY, HONDA MONKEY125, KAWASAKI KLX110, KAWASAKI KSR110, SUZUKI GS50, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI GAG, YAMAHA TT-R125, YAMAHA TT-R50E, YAMAHA TT-R90
Simultaneous installation is recommended
This time I used it together with Lightweight Camshaft Sprocket. Used Head is CUB 100 THAI 100 EX with J * N 105 cCam's 97 cc + PC 20 revision. It is designed to turn to high rotation with Cam effect. Weight reduction of rotating parts will work. This time it is only Titanium nut. As for weight, weighing about 1 g. Only 1 g, but 1 g. I do not know at about 8000 rpm of OEM use, but I think that you can see the effect for people turning from 10000 rpm. However, it may be about 10 times as expensive as OEM which is expensive. My turnip was 8 mm nut, but 6 v monkey lock nut has strength of 6 mm, so strength and resistance to Other Company Product is there.
Titanium Retainer + Nut set + Lightweight If you use it with Camshaft Sprocket it may be even better. I used a Titanium Retainer from a certain Manufacturer, but I used it in the past but it became a Buddha on the waist. Lightweight Parts think that it is better to use Risk side by side as well as side by side.
View detail
OEM Product Quality etc..
I used it for installation Bolt of 1400 GTR Inner cowl.
If you use it for a long time, since Rubber tears off and the Stopper function disappears, I think that it is better to replace it regularly.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY, HONDA SUPER CUB, HONDA glom, HONDA CUB, HONDA NSR80, HONDA NSR50, HONDA NS-1
Although it is not used frequently
If you are a Honda-based masters, you can use Large bodies, so I think people who often tinker with Motorcycle can have it.
Conversely, it is safe for people who use the Motorcycle shop to work quietly because people who use it only once are useless even if they have it
View detail
[Webike Monitor] It was used for Fender-less attachment. Since vibration of the Single was anxious, it attached and carried out by the Well nut, but I think whether the shake was considerably reduced by vibration.
[Webike Monitor] It was used for
Fender-less attachment.
Since vibration of the
Single was anxious, it attached and carried out by the Well nut, but I think whether the shake was considerably reduced by vibration.
View detail
Since there was Chatter sound of the Cowl, it exchanged. Chatter sound is also settled and satisfactory. the price is also pure -- it is cheaper and is saved.
Since there was Chatter sound of the Cowl, it exchanged.
Chatter sound is also settled and satisfactory.
the
price is also pure -- it is cheaper and is saved.
View detail
Fits: HONDA CB Series, HONDA XE series, HONDA APE 100, HONDA APE 50, HONDA KITACO cylinder head compatible, HONDA SUPER CUB 50, HONDA DIO(4Cycle), HONDA TODAY, HONDA MONKEY, HONDA MONKEY125, KAWASAKI KLX110, KAWASAKI KSR110, SUZUKI GS50, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI GAG, YAMAHA TT-R125, YAMAHA TT-R50E, YAMAHA TT-R90
Although it is expensive, it is clearly lighter than an ordinary nut. A weight saving can be carried out although it is several mere grams. It is recommended at those who are doing the fastest finger.
Although it is expensive, it is clearly lighter than an ordinary nut.
A weight saving can be carried out although it is several mere grams.
It is recommended at those who are doing the fastest finger.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY, HONDA SUPER CUB, HONDA glom, HONDA CUB, HONDA NSR80, HONDA NSR50, HONDA NS-1
A clutch cannot be disassembled if there is this [ no ]. Although carried out so so, since a price is a required thing thing, it is unavoidable.
A clutch cannot be disassembled if there is this [ no ].
Although carried out so so, since a price is a required thing thing, it is unavoidable.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY, HONDA SUPER CUB, HONDA glom, HONDA CUB, HONDA NSR80, HONDA NSR50, HONDA NS-1
It is a specialized tool of NSR50 required in the case of clutch decomposition. A clutch cannot be removed unless there are this and a clutch outer holder. It was actually able to be used and the clutch was able to be desorbed especially satisfact
It is a specialized tool of NSR50 required in the case of clutch decomposition.
A clutch cannot be removed unless there are this and a clutch outer holder.
It was actually able to be used and the clutch was able to be desorbed especially satisfactorily.
View detail