Reviews
fender eliminator
I received the package in very good condition, both on the outside of the packaging and on the inside, well protected and on the agreed date. The bike takes on a better street style, since with this fender eliminator you can better see the rear rubber View detail
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
Make a Chain.
Simply remove the previously installed item and install it in the same manner.
The product was just the right Size for MONKEY.
View detail
Fits: HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA NSR mini
For those who want to customize with a low level of flamboyance and casualness.
[How is it used?
I decided to refresh my long-owned car while restoring it, and while examining various parts, I found and purchased this product from Webike.
Was the one you received as per Image?
The design is similar to the front fenders installed on cars with inverted front forks in the 1990s, and it makes middle-aged men nostalgic.
I am getting to the age where I feel shy with too flashy a design, so this was just right for me and just as I imagined.
Was the installation difficult?
The fixing place is the same as the normal fender, but it is designed to cover the outer tube on the front side of the front fork, so it is only a little bit troublesome.
How was your experience with it?
The Front Fender itself fulfills its function (preventing water, etc. from bouncing up when it rains).
There was some distortion when I purchased it, but after installing it on MotorcycleBody for a while before painting, the distortion was gone.
After that, it is firmly painted and attached to the car body.
[Included Parts:were they on?
I think it had a Body and Installation Instruction Manual in it....
[Was there anything that disappointed you?
No, there was a slight distortion, perhaps due to individual differences, but as I mentioned above, it improved after leaving it unassembled for a while, and I have no problems with it.
0Other items that may be useful include
Point and hang of installation
Material:Since some individual differences and distortions are inevitable in FRP products, it is advisable to perform temporary assembly to check and correct distortions and defects before painting.
If the paint comes off in a distorted state after painting, forcibly assembled, it will make you cry.
[Availability and clarity of the Instruction Manual
A very simple installation Instruction Manual is included.
The installation itself is very easy, so check it once with a temporary assembly as shown above.
[Notes]
As I have written extensively, there are inevitably individual differences due to the nature of the material.
In some cases, bubble marks can be corrected by thinning Pate, etc. Base this item. The following is a brief overview of the process.
[ITEMS TO BUY TOGETHER
Thinned Pate/Water-resistance Paper in some cases as mentioned above.
Traces should be purchased with a primer, paint in the color you want to paint and Clear paint.
[Opinions and requests to Manufacturer
The product has been on the market for quite some time now, and it was a great help this time as well.
Please continue to sell as much as possible in the future.
View detail
Gives an overall better look for an all road orientated Monkey
About quality and texture, I can confirm the quality great and the material used is steel plate with a satin black painted finish.About the feeling of use, This down fender bracket set gives an overall better look for an all road orientated Monkey but it would be nice if the bracket had some adjustment to fine tune the height and angle of the fender.Products to buy together, By relocating the front fender from it's original position you have exposed the horn which looks cheap, the addition of a horn cover or horn relocation kit to your cart would be recommended.Difficulty of installation, I can say the fitment of the down fender bracket set for my installation was easy due to the ease of access to all the mounting bolts and included instuctions on how to assemble the set.Cost performance and comparison with other products, The pricing of this product is great You receive parts made from good quality material and the design of the set is solid. There are a few higher priced options similar to this product but with more attractive parts in their set, in the end they achieve the same outcome.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Does the job, could be a little lighter.
Got this to lower my front fender closer to the wheel, it does the job. I wished it was lighter, seems a bit much just to lower the fender. View detail
Carbon fender
Rear Carbon Fender for Grom is not so easy.
We don't have any in stock, so it's a good idea to buy it while we have it!
For JC61, but can be installed on JC75.
View detail
The shape is very good and well made
I was confused with the HURRICANE Fender Eliminator with mudguard Personally, I like the Number angle, which is not too much
However, the mudguard effect is naturally absent I have a splash guard from another company, but it flies to Seat As described by others, it protects the hole that passes Wiring with Cushion Tape I'd like the Cushion to be included in the package
View detail
Is good
I bought it because it was attractive that the Helmet holder is attached.. Because I was concerned about the Rear Fender which I thought it was Bottom, it was ◎ that I felt refreshing feeling and the usability of Holder was good. View detail
This is a nice thing ...
As you are told, I need a little hang for wearing.
I used a Helmet holder but it is convenient for the ground.
Reflector is optional as a matter of discontent though it is reasonable price
View detail
good!!
Among numerous Fender Eliminators,
It is feeling that the angle of License Plate is pretty much attacking!
Of course it is legal scope (Lol)
Just install it with License Plate Light's mounting plate
Number Plate Plate Plate for Reflector with additional addition
It is troublesome for A little to make License Plate, Reflector, License Plate Light and Center by combining the three holes with long holes.
Well I can fine-tune each one (Lol)
View detail
Good looking product
I order it for my Z125pro and installed it myself,it's not difficult to install, just follow the picture and make it step by step.i recommended it to my friend also. View detail
Recommendation for those who like bad feelings
The mounting angle is sharper than any Manufacturer's Fender Eliminator Kit, and it is jumping up.
It is not suitable for those who stick to visibility from the back, but OEMBlinker's
The mounting position is also perfect. Spongeetc. It seems to take measures against the mudguard of the cable inlet
Although it is described in the manual, I want a thin Sponge or Rubber sheet included.
View detail
It was good to change
In some Fender Eliminators, the angle of attachment was the best from the photograph, so I did this.
Installation is not so difficult, but some Wiring processing is necessary.
A totally new person may be confused.
Installation Instruction Manual is somewhat rough.
The feeling of use is very good without Wobble.
OEM is heavy, so I think you should install Fender Eliminator.
View detail
Refreshing looks and almost satisfied
Although the installation itself does not take so much time, if it takes time to remove the OEM Fender, if you dare complain, when you put the four bodies at the time of installing the body, the irritating feeling becomes MAX when putting it between the body and the car body Is it about? - - -.
If it is Street youth it will not be a problem as long as it is installed, but as soon as the Circuit runs it will irritate every time - - -. (? ▽ ?;)
For purpose of use with STREET & Circuit, it is necessary to search for falling prevention Washer so that Color does not drop.
View detail
Exquisite angle
Many Manufacturers have Fender Eliminator Kit out.
It was judged by photograph, but KITACO made the best angle so I decided.
Installation was a bit difficult but I was saved because Instruction Manual was kind.
If you do not touch Motorcycle too much, it may be good to leave it to Shop.
Because I need to remove Cowl, I think whether Shop is good before folding the claws or expanding afterwards.
I think that you can wear it without problems if you know how to remove Cowl.
Since I was not able to port OEMBlinker, the installation time was about 1 hour.
View detail
Refreshing!
Attached to new model Grom
I did not like the irregularly long Rear Fender and installed it.
Rear Fender of NORMAL is very heavy with Steel frame.
Large satisfied because it is also lightweight.
I wish Reflector should be set if possible.
View detail
Privately forbidden Custom
When considering CYGNUS X purchase, this is enough - - - I thought that.
Exhaust system exchange, Tire exchange, OEMFender seems to be unlucky.
After all I bought Fender Eliminator Kit.
As for mounting it was possible to do Smooth without any problems.
I think that it is a good thing as a product.
Tire pattern has become better visible, the purpose is achieved.
If you complain strongly, it is that the reflector was not screwed (Screw hole is empty in the pasted part of Bracket)
By removing OEMFender, you can see the invisible part.
I just made it to Fender Eliminator, but I'm worried about how to restore it.
View detail
[webike Monitor] It was the beauty and the lightness as expected. The instruction manual was kind also about attachment, and it was very good. A Carbon suits a Repsol color well too!
[webike Monitor] It was the beauty and the lightness as expected.
The instruction manual was kind also about
attachment, and it was very good.
A Carbon suits a Repsol color well too!
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Since the pure Fender was cut in order to attach an Inner fender, it attached. Although it is not an absolutely required Parts, since it looks poorly [ just for a moment ] when there is nothing, it purchases. If appearance was not asked, althou
Since the pure Fender was cut in order to attach an Inner fender, it attached.
Although it is not an absolutely required Parts, since it looks poorly [ just for a moment ] when there is nothing, it purchases.
If
appearance was not asked, although it may be possible, it purchased by commercial metal fittings.
There is admiration firmly by a Just size truly.
There is nothing that is replaced with
Colet.
It is good in it being merely a little cheaper.
View detail
"Although a design is so so, interference with F fork is intense. Although I did a paint application at home and being attached, an aerofender crashes into the position which fixes two forks on a road surface with an acute level difference. Therefore, a p
"Although a design is so so, interference with F fork is intense. Although I did a paint application at home and being attached, an aerofender crashes into the position which fixes two forks on a road surface with an acute level difference. Therefore, a paint application was removed after a test run. Although sponge is stuck and it is coped with now, it is nonsense. It interferes with a tire very well. Since it may because it is not a genuine tire, if a wheel is turned greatly or a car-body balance collapses due to going slowly etc., a fender and a tire will hit. It is businesslike as unavoidable. I think that it would be very good product if it is processed firmly." View detail