Reviews
Fits: HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB
Parenthesis OK
I think Parenthesis looks good. It is easy to install, too. The double-sided tape is visible from the outside, and it bothers me. I didn't notice it at first and ended up using a different double-sided tape to reattach it. Other than that, I have no complaints. View detail
Fits: HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB
A classic Custom that reminds me of the old days.
The classic custom parts of the 50cc era are now available in the modern age.
I am very happy to be able to use it.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50-PRO, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUBC125, HONDA SUPER CUBC125
Perfect for dress-up
Steel, so it's a bit heavy.
When removing the light rim, be careful that the female side of the claw is easily broken.
If it is not firmly seated when installed, it will not fit.
It will fall off when there is a difference in level, etc.
View detail
A little Mischief makes it pretty!
[How is it used?
It can be used for Headlight's One point.
Was the one you received as per Image?
Yes, it seemed a little thin, but no problem.
Was the installation difficult?
If you can disassemble Headlight, no problem.
How was your experience with it?
It is a little Mischief and cute looking.
[Included Parts:were they on?
No
[Was there anything that disappointed you?
The board seems thin.
There is no distortion and no problems, but…
▼Recommendation by One point custom because it is cheap.
View detail
With a little work.
I bought this because I'm worried about the waterproof of Wiring with Grip heater.
I was wondering if it would work with the OEM Grip heater because it says it can't be installed at the same time as the heater ””, but it only uses the same mounting part, so I was able to install it without a problem by changing the bolt to a hole in one of the nuts. There is a feeling that it is a little expensive, but I am satisfied functionally.
View detail
Cool, as expected with accuracy!
The Under Cowl with Oil pan
I bought this because it was required by Circuit.
I thought Carbon would be a better choice, but
It looks Parenthesis better and was the right choice! (Translated by ω-) b
Since the bracket is one piece, the Yoshimura exhaust manifold will interfere with the bracket. So you will need to modify the bracket.
I thought it would be better if this place was divided from the beginning.
I was worried about the interference of the Swing Arm with Stabilizer, but I was able to avoid it by making my own Bracket.
The installation method is simple, so it was easy for me to make my own Bracket.
The accuracy of the installation is very good and the quality is very good. (Translated by ω-) b
I recommend it because it looks COOL!
View detail
Can cover the Cable and Harness behind the Meter.
It can cover the Cable and Harness on the back of the Meter, and can prevent rain, dust, dirt, etc. Since I go out to the mountain to pick wild vegetables, I thought I could prevent grass and branches of trees. The appearance can be installed neatly to think that it is OEM Parts.
If I had to choose, I'd say that this narrow space is the best place to use Material.:Would it have been better with Plastic? If it is this part, Material:I was hoping it would be a Stainless Steel Screw? I thought so.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50-PRO, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUBC125, HONDA SUPER CUBC125
Good Items for Dress-up
At the time of installation, Quantity:Pair (for Left and Right) You have to measure it symmetrically before attaching it, and the included double-sided tape is hard to attach unless you process it.
I was afraid that it would come off, so I put Coking inside.
It's definitely a cute little item once it's attached.
View detail
Ideal for Dress-up!
Mounting on new type grommets.
When attaching YOSHIMURA's Exhaust System, it was impossible to attach a pump.
Because exhaust manifold interferes with exhaustion, it is necessary to perform cutting work so as not to interfere.
Installation was easy if we could only process. Fixed 4 brackets with Bolt.
As I was gathering information on Net before, I was prepared to hear the story that footpeg got in the way I could not stop Bolt and fixed it with Tying Band, but I was prepared, but the position of the hole has changed and problems I could fix it with Bolt.
After all the carbon is cool!
- - - - But it is expensive.
View detail
cute
Light has items of MONKEY, but I bought it for a bit of Dress-up. Because it is dark with 6V electrical equipment, it is also expected to light the road a little. When installing, it is necessary to adjust the bend condition only slightly so as to fit Rim, but because it was not careful, it turned out that the bend became too tight and the pointed feeling became. Please be aware of who is going to install it. Regarding the brightness of the road surface, I can not actually feel realized because of Helmet's Smoke Shield.
Because the car body is bigger than MONKEY, it is not noticeable so much, I wonder if it was long..
It is stylish that it is inconspicuous.
View detail
Although appearance changes very much .. It is regrettable to become difficult to insert [ the Cowl, the thing into which the Stay which fixes a Frame cannot go easily, and ] in a sheet.
Although appearance changes very much .. It is regrettable to become difficult to insert [ the
Cowl, the thing into which the Stay which fixes a Frame cannot go easily, and ] in a sheet.
View detail
The APE 50 was equipped. When it equipped with a thing with a quite incomprehensible figure of the description, it was the point which the thing whose Clearance of that the crevice between some appears in a sheet and a Tail, a Blinker, and a Tail is
The APE 50 was equipped.
When it equipped with a thing with a quite incomprehensible figure of the
description, it was the point which the thing whose Clearance of that the crevice between some appears in a sheet and a Tail, a Blinker, and a Tail is just before worried, and circumference of rear one of after [ wearing ] became tight, and it became good parenthesizing it.
Since the white of a car body is delicately differed from when you have no
paint application, it is uncomfortable.
I think that cheapness will disappear if
paint application is carried out.
They were goods which buy it since it can change into the atmosphere of the
NAKED style at a Reasonable, and do not have loss.
View detail
A pure Cover is removed and this product is used. At the time of removal of pure Cover, the unfamiliar one may be puzzled a little. Let's work the instruction manual of attachment with reading well. Since it has risen in my diary in d
A pure Cover is removed and this product is used.
At the time of removal of
pure Cover, the unfamiliar one may be puzzled a little.
Let's work the instruction manual of
attachment with reading well.
Since it has risen in my diary in detail, it is reference (^_^;)
View detail
since R of a Headlight and a Visor did not suit a little as expected [ ] although it was indicated as the object for the Headlights of KITACO for description of item -- -- it was bending by hand lightly. The result and another Manufacturer were
since R of a Headlight and a Visor did not suit a little as expected [
] although it was indicated as the object for the Headlights of KITACO for description of item --
-- it was bending by hand lightly.
The result and another Manufacturer were also suited.
The die length of the
Visor is not too long, either, is not too short, and is recommended in the direction of appearance serious consideration.
View detail
This CB tail was not compatible with for 100. Since the raw material was solid, since there was no crack, it is very much satisfied only with having applied power for a while of this tail cowl in reinforcement. however, the way which lowered a lit
This CB tail was not compatible with for 100.
Since the raw material was solid, since there was no crack, it is very much satisfied only with having applied power for a while of this tail cowl in reinforcement.
however, the way which lowered a little location of the blinker downward by stay etc. since the clearance in the case of equipping with a normal blinker was only in the true grip -- merit that's right.
View detail