Reviews
Simple is good.
Installation is very easy as it is fixed with a tie band, but I am concerned that it may move in the future as the tightness is weak.
I installed it on my OHLINS front fork and I like the simplicity of it.
There are other, more expensive ones out there, but I think this one will suffice.
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
fender eliminator
I received the package in very good condition, both on the outside of the packaging and on the inside, well protected and on the agreed date. The bike takes on a better street style, since with this fender eliminator you can better see the rear rubber View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
White stands out.
It will be Accent on Black tasteless Smart key.
It's also good that you can't mistake it for a spare key!
View detail
Fits: HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB
Parenthesis OK
I think Parenthesis looks good. It is easy to install, too. The double-sided tape is visible from the outside, and it bothers me. I didn't notice it at first and ended up using a different double-sided tape to reattach it. Other than that, I have no complaints. View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
I think it would have been better if it were a little thicker.
The fabric is too thin. The texture would be better if it were thicker. View detail
Mounting is a little Large change
The work is quite large and odd, as it requires relocation of the Horn and removal of the Light, but if you have the proper tools and read the Instruction Manual carefully, you can get by with it. It looks good and was worth the trouble! View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, HONDA MONKEY125, Others , HONDA GB350S, HONDA GB350
Stylish and easy to apply
Simply attach with the special double-sided tape.
But I wish they had put it on the product side from the beginning...
The product is small, so it is a little difficult to hold when applying it to the Motorcycle side.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
Make a Chain.
Simply remove the previously installed item and install it in the same manner.
The product was just the right Size for MONKEY.
View detail
To protect the license plate.
[How is it used?
I searched for a License Plate Holder on Webike to protect my SEROW225WE License Plate. I was looking for the cheapest product and came across KITACO's product.
How was your experience with it?
The appearance is that of steel with plating, so the Material:If you compare it with the products that are Anodized Treatment for each color in Aluminum. Cheapness." cannot be hidden.
However, the motive for purchasing License Plate protection that bends every time I go out to play in the mountains." Therefore, since they are going to be bent anyway, Cost is more important than texture.
How did it compare to other products?
As I said above. "Cheapish" The price is actually cheap, so there is nothing to be done about it.
Material of the same thickness, perhaps due to the material of steel:It is a little more rigid than the Aluminum product, and so far the License Plate has not bent.
[Points to note]
The product is made of steel with plating treatment, so it will eventually be rusted if scratched.
Even without Wound, Rust may be unavoidable depending on the environment, so it may be better to protect it with Wax or similar.
There is a possibility that you may get hurt if you handle it roughly with your bare hands. [Color] I sprayed ClearSpray.
Other items that would be helpful
The deciding factor in the purchase
Cheapness, that's what it's all about.
In my case. "the expendables" However, if you are looking for texture, Material:Aluminum and Material:I think you will have less post-purchase regret if you consider Carbon's other products.
【Included Parts:presence or absence】.
Only one Plate is available.
Simple, low price, just the right product for me.
[ITEMS TO BUY TOGETHER
The existing Bolt can be used to install the License Plate with no problem, but it may be a good idea to add an Aluminum Collar or CoolBolt (if you are in an area where theft is common, you may want to consider an anti-theft Bolt).
Opinions and requests to Manufacturer.
We look forward to a long-lasting Lineup for Cost-conscious Users.
View detail
The License Plate is bent, so it is reinforced with a License Plate Holder!
I was looking for an inexpensive License Plate Holder before the License Plate bent into a squishy mess, and I found KITACO's License Plate Holder!
I like it because of its simple design and good texture!
View detail
Fits: HONDA glom, Others , HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA DAX125
Just size
Since it is a reverse zrx1100, the key cylinder is a little different from the one used in the FOR JAPAN MODEL, but it fits just fine.
Double-sided Tape spare or 5 stars if available
View detail
Fits: HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA NSR mini
For those who want to customize with a low level of flamboyance and casualness.
[How is it used?
I decided to refresh my long-owned car while restoring it, and while examining various parts, I found and purchased this product from Webike.
Was the one you received as per Image?
The design is similar to the front fenders installed on cars with inverted front forks in the 1990s, and it makes middle-aged men nostalgic.
I am getting to the age where I feel shy with too flashy a design, so this was just right for me and just as I imagined.
Was the installation difficult?
The fixing place is the same as the normal fender, but it is designed to cover the outer tube on the front side of the front fork, so it is only a little bit troublesome.
How was your experience with it?
The Front Fender itself fulfills its function (preventing water, etc. from bouncing up when it rains).
There was some distortion when I purchased it, but after installing it on MotorcycleBody for a while before painting, the distortion was gone.
After that, it is firmly painted and attached to the car body.
[Included Parts:were they on?
I think it had a Body and Installation Instruction Manual in it....
[Was there anything that disappointed you?
No, there was a slight distortion, perhaps due to individual differences, but as I mentioned above, it improved after leaving it unassembled for a while, and I have no problems with it.
0Other items that may be useful include
Point and hang of installation
Material:Since some individual differences and distortions are inevitable in FRP products, it is advisable to perform temporary assembly to check and correct distortions and defects before painting.
If the paint comes off in a distorted state after painting, forcibly assembled, it will make you cry.
[Availability and clarity of the Instruction Manual
A very simple installation Instruction Manual is included.
The installation itself is very easy, so check it once with a temporary assembly as shown above.
[Notes]
As I have written extensively, there are inevitably individual differences due to the nature of the material.
In some cases, bubble marks can be corrected by thinning Pate, etc. Base this item. The following is a brief overview of the process.
[ITEMS TO BUY TOGETHER
Thinned Pate/Water-resistance Paper in some cases as mentioned above.
Traces should be purchased with a primer, paint in the color you want to paint and Clear paint.
[Opinions and requests to Manufacturer
The product has been on the market for quite some time now, and it was a great help this time as well.
Please continue to sell as much as possible in the future.
View detail
Fits: SUZUKI GSX-R1000R, SUZUKI GSX-S1000F, SUZUKI katana, SUZUKI DL1000 V-STROM1050, SUZUKI R125-G, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI DL1000 V-STROM650XT, SUZUKI GSX-S1000, SUZUKI GSX-S125, SUZUKI DL1000 V-STROM1050XT, SUZUKI DL1000 V-STROM650
Easy
Purchased in conjunction with another product. The description says a lot, but you just peel off the backing paper and stick it on. View detail
Fits: HONDA glom, HONDA SUPER CUB110, HONDA SUPER CUB 50, HONDA CROSSCUB110, HONDA CROSS CUB50, Others , HONDA DAX125
JC92 key cover
Installed on JC92 Grom. Already hat the billet key cover by kitaco, so why not pair it up with the ignition cover. Easy install, would be nice if they gave x2 of those double sided tapes. So far its still on the bike after 400mi and looks good. View detail
Exquisite Items that add charm
I put it on because I felt it would add to the cuteness. View detail
I like the design
Since his own body is Large size, this Seat is a little narrow.
Firm cushion with narrow seat width for easy knee grip
I like the Design the most!
View detail
Fits: HONDA glom, Others , HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA DAX125
Easy installation◎High quality
The key box is a used car, but it is getting dirty due to use and aging, and I thought it would be nice to customize it to my color.
Mounting
Key box coverBody and Double-sided Tape are included. This is an ultra-thin type. It is a type that will lose its adhesiveness if it is reapplied many times, so it is better to position it firmly and apply it in one shot. Especially, since the position of the ON key differs depending on the car model, choose a place where you feel the least discomfort. In the case of the Grom, the key is turned on in the 12 o'clock direction, so the KITACO Logo is a little closer to the right.
Texture
The aluminum construction gives it a high-class feel. The printing is also easy to see the large change, and since our Handlebar Grip is gold, we tried to match the color, and although the color is slightly different due to the difference in manufacturer, there is almost no sense of discrepancy.
■Usability
It is thicker and a little uncomfortable because it is taller than OEM, but the key will not get stuck when inserted. If you have a different key handle or use a special key, please pay attention to the height of the key handle.
■ Others
The Aluminum Cut-out gives it a high quality feel, but I wish the price was a little lower. Also, since there are only three color lineups, it would be better if colors such as White and Black were also available to allow for a wider selection.
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
So that you can see in the dark.
I bought it so that I can easily locate it in dimly lit places. The price is also the price, so I guess it can't be helped that it looks cheap. I chose the color White and it stands out in dim light.
It is a pricey product, so don't expect too much.
View detail
It is easier to handle! On the other hand, some people need to be careful how they ride.
[How is it used?
I did not like the Plating color of the OEM Grab Bar and wanted to change the Image.
Was the one you received as per Image?
The color was a nice Matte Black, just like the image.
Was the installation difficult?
Even a novice like me could install it without any difficulty, and even without special tools for motorcycles, I could install it with common tools I have at home.
How was your experience with it?
First of all, in terms of looks, I personally thought that the replacement made the car look somewhat larger than OEM, which I thought was quite a nice touch.
In addition, when I handle the motorcycle (when backing it up at a bicycle parking lot, etc.), I hold the handlebar with my left hand and the grab bar with my right hand, which is much easier to do.
Also, I was able to hang Helmet on the Grab Bar, which was convenient when I wanted to leave it there for a while.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
One disappointing or unexpected point is that I often hit the Grab Bar near my shin when I straddle the Motorcycle.
I guess it depends on your height, but for me, 185cm 75kg standard build, I have had many painful experiences.
Well, to say that it is a bad way to ride is an understatement.
【Review】
I thought I had purchased this product just to change the look, but it has been a fun product to discover many things, such as better handling, hanging helmets, and sore snouts.
By the way, we do not do Tandem, so that is not included in the evaluation.
View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, HONDA MONKEY125, Others , HONDA GB350S, HONDA GB350
One pointAccent is Recommendation!
It is a world of self-satisfaction, but the area around the Top Bridge was plain, so I installed it as a One Point Accent. As I expected, it became a little more gorgeous. (Lol) It is a RECOMMENDATION because of its cosmetics.
In addition, from a practical standpoint, I feel that it is easier to locate the Key cylinder because it stands out in the dark.
It's not so much construction as it is peeling off the release paper on the back side of the product and using the Icon on the Key cylinder. (Power On, etc.) It only takes a minute to complete the process.
View detail