Reviews
Fits: SUZUKI GSX250R, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Something ….
I'm sorry, but this is the price for this.
It is so plain that even I forget that I put it up.
I only notice it when I put Gasoline in.
View detail
Too hard.
I bought it to improve the footing, but I sit in the front and it doesn't change the footing at all. View detail
Flexible but floats.
It was a soft Sticker with flexibility.
The adhesiveness is about the same as a regular Sticker etc., so it will come off quickly.
The surface has been degreased, but there is some floating.
The paste part of zx25r is pear skinned and does not adhere well.
It has to be a Type like Cover.
Size is also Small ....
View detail
Fits: HONDA CROSS CUB50, Others , HONDA CROSSCUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA glom, HONDA DAX125
One change to the usual work?
JC92 I use for commuting.
Key it up as usual on a normal morning and press Cell starter.
In the midst of such repetitive work, there are times when I feel very happy about small changes.
The one that I installed this time is such a product that makes me feel small and happy.
Key box cover. it is a place where you can see when you put the key in the box, so it is not so plain but it gives a large impression.
This product has a lot of Coloring and compared with OEM, it is glossy and a little accent.
I chose the Red color.
It's very easy to install, just use double-sided tape and you're done in 3 minutes.
Even though the cost is relatively low, the cost effectiveness is extremely large because it leaves a large impression.
Because of the Motorcycle used for commuting, it rides even on a rainy day, but there is no problem in use. I don't think it will ever peel off.
However, as mentioned in other people's Reviews, the letters themselves tend to fade. It has been almost half a year since I bought it, but the letters are fading and I feel that the life span is short. I think it is inevitable because it is cheap, but ….
Also, the metallic color tends to fade easily, so we recommend you to buy black.
It can be said that it is the best product to add a small change to the usual motorcycle life.
However, since it is cheap, it will be of a reasonable quality.
I wouldn't get your hopes up too high.
It's something you should think twice about if you're considering a purchase.
View detail
expectation
OEMSeat base for the price...at least make it FRP
The comparison with the Biphone Seat is that the seat is wider but harder to press with your fingers? After the snow melts, it's time for a test drive
View detail
Positioning is difficult ... ... ? (ノ∀`) ・゚・。
Although purchased for the prevention of scratches on Top Bridge, the product is not Real Carbon, but thin Vinyl
It is a state FakeCarbon.
Positioning is difficult, as described in the manual "Water paste" Although it did, to a position that is convinced until the last
I could not paste it ... _ | ? | ○ ililil
Well, I wonder if it will prevent scratching of the Top Bridge ...
If only you do not like it, just peel off, so well, would you like to do it?
View detail
Fits: HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR
subtle
I bought Cushion to use for Pocket part of CB 1300SB. I thought that impression was pretty small, but it was okay. Actually putting it in the Pocket part does not enter Smooth because Sponge does not slide so much, there was a sense of discomfort for a while. Well this may be such a thing, but it was a bit disappointing. View detail
I do not think it is made by KITACO Quality
Were you abandoned as a hard-to-see part? Carbon folds on Rear side do not match, also the division part of Center is cheating with Matte black paint on the back side, really KITACO made? Thailand outsourced article? Exhaust pipe exhaust heat function Doubtful Design. View detail
Who should buy another company's product?
I thought that luxury feeling will come out made by KITACO I bought it by a prompt decision. However, despite the installation work as per the Instruction Manual, there was a gap in the upper part of the Left, I tried to press it with hands or put weight, but in the end I did not close. On the contrary, after a few days, since there was also a gap in the upper part of the Right, once removed, I removed it once and reinstalled and reinstalled it with the Double-sided Tape at my house including the other parts, but in the end, the gap at the top of Left , It did not resolve.
View detail
Fits: HONDA MONKEY, HONDA SUPER CUB 50, HONDA KITACO cylinder head compatible, HONDA APE 50, HONDA APE 100, HONDA XE series, HONDA CB Series, YAMAHA TT-R50E, YAMAHA TT-R125, KAWASAKI KSR110, KAWASAKI KLX110
Since tappet sound came to be immediately heard after attaching, the crevice was open when looked at well. I think that they are such goods since it is not repaired however it may adjust.
Since tappet sound came to be immediately heard after attaching, the crevice was open when looked at well.
I think that they are such goods since it is not repaired however it may adjust.
View detail
Since the pure chain case had bad appearance at the product made of a plastic, this product was purchased and attached. O Compared with a good point and a general chain case, a price is cheap. Although thing has not placed goods of this sort in an
Since the pure chain case had bad appearance at the product made of a plastic, this product was purchased and attached.
O Compared with a good point and a general chain case, a price is cheap.
Although thing has not placed goods of this sort in an article store etc. in many cases and it will hesitate at purchase, this product was able to be purchased freely.
- It was able to attach in several minutes for bolt on.
- Brightness is smart because of the stainless polished finely.
x -- a high grade feeling is seldom felt for the easy configuration where the board of bad point and rectangle and two L character boards were stuck.
- I think that the width of the top plate of a cover is small and there is almost no effect which protects a chain from rain or dirt.
- There is also almost no effect which prevents scattering of chain oil similarly, and a rear back came to become dirty considerably from chain oil.
Although there is almost no function as a chain cover and I think the parts of only appearance, stainless brightness is beautifully pleasing as accessories.
View detail
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
The pure type external up muffler is used. In the normal fender of what interfere and is not since it changed into the 8-cm long swing arm and the 10-inch tire & wheel, since the style was not quite satisfactory, it equipped. Although it is OK in
The pure type external up muffler is used.
In the normal fender of what interfere and is not since it changed into the 8-cm long swing arm and the 10-inch tire & wheel, since the style was not quite satisfactory, it equipped.
Although it is OK in style, it melted with the heat of the muffler in the run for about 30 minutes, and a hole opens.
Since the exhaust port is thin if it is a normal muffler, it may be OK.
Is an external muffler geometrically useless?
View detail
Correspondence vehicle type KAWASAKI : Since it was standard to ZEPHYR750ZEPHYR1100 and ZEPHYRchi and was attached to them, if it matches well somehow was thought and how much effects there are by practical use purchased by appearance as another. Alth
Correspondence vehicle type KAWASAKI : Since it was standard to ZEPHYR750ZEPHYR1100 and ZEPHYRchi and was attached to them, if it matches well somehow was thought and how much effects there are by practical use purchased by appearance as another.
Although a cable tie is used for attachment, about this, I think that the pros and cons are divided.
If it sees from a distant view, it hardly understands, but when it often sees nearby, it is conspicuous, and also since it was a little cheap, we cannot not much recommend you the direction of appearance serious consideration.
After all, although I had stuck for a while, it was not pleasing too and I removed.
View detail
Fits: HONDA NSF100, HONDA NSR50, HONDA NSR80, HONDA NSR mini
The zoomer (ruckus) which has already transplanted time-tested ZX axle part was equipped. Although the fender of Saitaniya was popular, it was dared to choose the product made from a kitaco with the thick Faulk portion. It reveals and interferes i
The zoomer (ruckus) which has already transplanted time-tested ZX axle part was equipped.
Although the fender of Saitaniya was popular, it was dared to choose the product made from a kitaco with the thick Faulk portion.
It reveals and interferes in a tire considerably.
If molding to the Faulk portion from a nose is too thick and is not cautious of clearance, a tire will split.
since -- I think that I will process only a few in the near future.
Is it unsuitable for wearing of those other than NSR?
(although it is a natural result and becomes empty in other vehicle type appropriation)
View detail