Reviews
It is easier to handle! On the other hand, some people need to be careful how they ride.
[How is it used?
I did not like the Plating color of the OEM Grab Bar and wanted to change the Image.
Was the one you received as per Image?
The color was a nice Matte Black, just like the image.
Was the installation difficult?
Even a novice like me could install it without any difficulty, and even without special tools for motorcycles, I could install it with common tools I have at home.
How was your experience with it?
First of all, in terms of looks, I personally thought that the replacement made the car look somewhat larger than OEM, which I thought was quite a nice touch.
In addition, when I handle the motorcycle (when backing it up at a bicycle parking lot, etc.), I hold the handlebar with my left hand and the grab bar with my right hand, which is much easier to do.
Also, I was able to hang Helmet on the Grab Bar, which was convenient when I wanted to leave it there for a while.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
One disappointing or unexpected point is that I often hit the Grab Bar near my shin when I straddle the Motorcycle.
I guess it depends on your height, but for me, 185cm 75kg standard build, I have had many painful experiences.
Well, to say that it is a bad way to ride is an understatement.
【Review】
I thought I had purchased this product just to change the look, but it has been a fun product to discover many things, such as better handling, hanging helmets, and sore snouts.
By the way, we do not do Tandem, so that is not included in the evaluation.
View detail
Wind protection effect is questionable.
[How is it used?
The wind at high speeds is hard to drive in, so I installed the windshield in the hope that it would provide wind protection.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is easy to install as long as you have a Wrench.
How was your experience with it?
After installation, I went out for touring several times and could not feel the wind protection effect.
Aside from the windshield effect, I think the Meter is now easier to read and looks cooler, so that's a good thing.
View detail
Easy to install
This product does not require the removal of the holder that holds the headlight in place, but instead requires the removal of the two caps attached to the handlebar frame (underside of the headlight) and then the screw to secure the bracket to the headlight. The work is easy because the bracket is fixed there with screws. The texture of the Emblem is not bad. View detail
Fits: HONDA CB250R, HONDA CB125R, HONDA CT125CT110 HUNTER CUB, HONDA CT125CT110 HUNTER CUB, HONDA MONKEY125, HONDA MONKEY125, Others , HONDA GB350S, HONDA GB350
One pointAccent is Recommendation!
It is a world of self-satisfaction, but the area around the Top Bridge was plain, so I installed it as a One Point Accent. As I expected, it became a little more gorgeous. (Lol) It is a RECOMMENDATION because of its cosmetics.
In addition, from a practical standpoint, I feel that it is easier to locate the Key cylinder because it stands out in the dark.
It's not so much construction as it is peeling off the release paper on the back side of the product and using the Icon on the Key cylinder. (Power On, etc.) It only takes a minute to complete the process.
View detail
The look and feel has changed.
The item had been out of stock for a while, but thanks to the efforts of the Shop, we were able to purchase it quickly.
The installation is not particularly difficult, and I think it is one of the easiest to install.
The Bracket is also solid, so strength is not a problem.
The tool used was a 4mm hex whereas the original Screw was 5mm hex. I also needed a +Driver.
We have confirmed the installation procedure in advance and it should take about 15 minutes to install.
View detail
It is beautifully Anodized Finished!
It looks different but does not change anything in terms of driving. It is a recommendation for those who are obsessed with it. (_ _) m View detail
watchman
Well, it's a classic.
I don't like to add things to custom (I am more of a subtractive person), but I really wanted to add Basket, so I bought this one. I bought this one because I really wanted to add the Basket.
The texture is perfect, but I want to put a front basket on my Carrier, so I'll skip that part.
Thanks to you, it was ideal. DAX like grandma would ride." has been completed.
View detail
Gives an overall better look for an all road orientated Monkey
About quality and texture, I can confirm the quality great and the material used is steel plate with a satin black painted finish.About the feeling of use, This down fender bracket set gives an overall better look for an all road orientated Monkey but it would be nice if the bracket had some adjustment to fine tune the height and angle of the fender.Products to buy together, By relocating the front fender from it's original position you have exposed the horn which looks cheap, the addition of a horn cover or horn relocation kit to your cart would be recommended.Difficulty of installation, I can say the fitment of the down fender bracket set for my installation was easy due to the ease of access to all the mounting bolts and included instuctions on how to assemble the set.Cost performance and comparison with other products, The pricing of this product is great You receive parts made from good quality material and the design of the set is solid. There are a few higher priced options similar to this product but with more attractive parts in their set, in the end they achieve the same outcome.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: HONDA MONKEY125, HONDA MONKEY, HONDA SUPER CUB, HONDA glom, HONDA CUB, HONDA NSR80, HONDA NSR50, HONDA NS-1
Used on JC75 Grom. Probably only one turnout.
When replacing the clutch cover on the Grom, the centrifugal filter has to be removed, but without this I was reluctant to purchase it because I could not remove the nut that is deep in the clutch cover.
The Ratchet plug is 12.7mm, and the one I had was only 9mm, so I purchased a Conversion Adapter separately.
The length of this Adapter just reached the insertion hole, so we did not need to use Extension.
Once the centrifugal filter is removed, this part is no longer needed.
View detail
Strength when installing rear box
I installed GIVI's B32N-ADV rear box on my APE50. However, one of the bolt parts for mounting the carriers broke after about 6 months of use because the weight capacity of the carriers was over the limit. View detail
Replacement of aged well nut
The well nut used to hold the screen in place had deteriorated over time and had become chica-chica, so we replaced it. I am not sure if the old well nut was OEM or external, or how long it had been in use, but it seemed to have been in use for quite some time, and had hardened, leaving it in a tightened shape that made me think it might have been over-tightened.
In this case, we chose KITACO's product, which is less expensive than OEM's. The number of KITACO's product was 5 pieces, whereas we needed 6 pieces, so we used 2Quantity:I purchased a set. I think the number of units needed depends on the type of car and the location where it is used, but I don't think that 5 units are needed very often. Well, it is still cheaper than buying 6 OEM ones.
There is nothing particularly difficult about the installation, but removing the hardened old well nut was a large challenge, and we had to be careful not to damage the cowl by using radio pliers and picks. Once the old ones were removed, all that was left was to put the new well nuts through the cowl holes.
I installed it, and there is no particular problem, but in the review of other people who used this product on daeg, the size was Exactly to the Cowl depression, but on zrx1100, the diameter of the Well nut umbrella was a little small in relation to the Cowl depression.
As a matter of course, the new Well Nut will protect the Screen from vibration because the Rubber is newer and therefore more flexible.
View detail
Fits: Others Engine Displacement Volume 125cc or less (Moped 1st/2nd Class)
Attached Screw
The idea is a great product.
The included Screw and Spacer 8mm may not be able to be installed if the Motorcycle side is thick.
We purchased another product (see photo) for NumberSecurity, and applied a 6M×diameter 18mm×thickness 3mm Spacer, and adjusted the height of this product so that it does not hit the Number Limit.
*Motorcycle is SMART DIOZ4 2004
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
Frankly, it's subtle.
I purchased this product to dress-up my PCX160 Smart key.
The Instruction Manual states Align the bottom edge of the Seal with the paste location and paste." but I knew from other people's impressions that it did not match HONDA's Logo, so I checked the position first.
As a result, it was found that the top edge would protrude if the Logo was used as a reference, so it was decided to Cut the Logo after pasting it.
If the Size was just right and thick enough, I would have given it 5 stars, but it was a little disappointing.
I would like to see a Manufacturer option with Logo printed on it instead of leaving it to Other Brand Products.
View detail
Impression changes! The effect is ….
[How is it used?
I purchased this product to hide rust on the front fork and to change the impression of its appearance.
Was the one you received as per Image?
Yes
Was the installation difficult?
It is easy to fasten with Tie Wrap.
How was your experience with it?
I am happy with the change in appearance.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Red color on Black background, austere and easy to see the keyhole position.
I bought it to change its appearance, and it was the right decision to install Large. The reasons are as follows:(1) The appearance became cooler, and the red color looks good on the black background. (2) It became easy to confirm the key insertion position. (3) The installation was done with the attached double-sided tape. It does not take much time. (4) Reasonable price for PetitCustom. View detail
Surprisingly difficult to install
I bought it because it was hard to see the meter during the day. I asked Motorcycle shop to install it because I thought it would be hard to install.
I watched the installation process and I think I was right to ask.
View detail
Seat height will be increased, but it is a necessity for touring.
■ Design
Unlike the RedStitch, the Ideal Seat has a more gentle design than the OEMSeat, which has an uneven design that clearly separates the Passenger from the Space. The Ideal Seat has a gentle design.
■Sitting comfort
The seat itself is firmer, but vibration is clearly reduced compared to the OEMSeat. The reduced unevenness of the seat provides more space for riding, making it easier for people with large builds to ride. In particular, the use of Gel in the buttocks has the effect of making the impact of pushing up almost imperceptible. Thanks to this, pain when sitting for a long time is reduced. However, I still feel pain when I stay in the same position, and I have the impression that the pain does not linger.
■Touch feeling
The top surface is an uneven dimple mesh. It is a little slippery to the touch, but the SIDE is non-slip, so it is easy to change posture without slipping too much.
■Footwear
Since the width and height of the Seat increases, the footing naturally worsens. It feels as if the seat is 5 cm higher than it was before.
General Comment
The quality is at a level where it would not be out of place even if sold as an OEM product. 30,000 yen or more for the parts for a mini bike makes it an expensive part, but I think the cost-effectiveness is high. Especially for those who ride long distances in the same posture, it is a must-have item.
View detail
Mini Front Fork Guard
This time, after repairing an old ELIMINATOR 250SE with a front fork oil leak, I put it on just in case.
The front fork of the ELIMINATOR 250SE is soft, so I think it will be effective in protecting the Inner Fork.
I am satisfied with the cosmetics and the Accent.
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
For Smart key Accent!
The OEM Smart key has a strong resin feel, so it was easy and convenient to apply. View detail
No problem even with heavy objects
It takes a little time to install, and if the Rear Suspension is removed, it is Large sturdy.
I wanted to put a slightly larger backpack on it, so I went with this one. 6 kg is plenty of room.
View detail