Reviews
GB Engine Guard
[How is it used?
24-hour (e.g. observation, operation (of a machine), care (of patient))
Was the one you received as per Image?
high
Was the installation difficult?
Easy
How was your experience with it?
No problem
[Included Parts:were they on?
OK
[Was there anything that disappointed you?
Oil replacement has become a bit more difficult.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
GB350S Engine Guard installation
There is no clearance between the Torque wrench and the Pipe when installing the Bolt, so it is difficult to do. It is recommended that two people work together. View detail
Fits: HONDA PCX125, HONDA PCX125Hybrid, HONDA PCX150, HONDA LEAD125, HONDA ADV150, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA CT125CT110 HUNTER CUB
Title is not specific.
Well, if you directly connect to the Internet, you don't need it, but it is quite narrow to get in, so if you think of it as a convenient item, it is cheap and inexpensive! View detail
I had a hard time attaching the spring.
There is nothing difficult about the installation itself, but I had a hard time hooking the spring.
CROSS CUB (JA10) The STAND itself is stored hidden in the Exhaust System, so it is a bit difficult to hook it out with a foot.
But this will give us more Situations to park.
View detail
Might be a blind spot. Useful to have.
SUPER CUB110 (JA44) However, thanks to the conversion to CROSS CUBOEMfootpeg, the Quantity:Pair (for Left and Right) Since there is a Bracket installed on Both Sides, I immediately purchased a relatively inexpensive Right Side Stand for CROSS CUB from KITACO and installed it.
If you use it, it is quite convenient. If you have to park on a slight incline and the right side is down, you may feel uneasy with a normal STAND because of the reverse bank, but with RightSTAND, you can park with a sense of stability and peace of mind.
Or, when parking on the side of the road and taking pictures from the other side of the river, with LeftSTAND, the motorcycle will be flustered, but with RightSTAND, the motorcycle will bow to you, and it will look good. (Is it just me?)
If you don't have it, that's fine, but it's useful to have it, so at this price, it's not a bad idea to have it on.
Incidentally, this Side Stand does not rub even if the RightCorner is banked considerably; the Stand stopper part of the Footpeg hits before the STAND (^^;
View detail
I should have put it on sooner.
This is the 15th year I've owned a ZOOMER and installed it.
I installed it for convenience, but I also installed it for coolness.
Installation itself is very easy. However, the diameter of the bolt is a little large, so I had to use a monkey wrench to tighten it.
It is sturdy and will last for 10 years.
View detail
Off-road car-like feeling is up!
If the pipe diameter was a little thicker, it would be even better. View detail
Off-road car-like feeling is up!
The Under Guard is made with the OEM Under Guard in mind. If you have a motorcycle lift or something like that, you can make it taller and more efficient. If you have a motorcycle lift or something like that, it will be more efficient. View detail
Fits: YAMAHA Cygnus X, YAMAHA NMAX155, YAMAHA MAJESTYS, YAMAHA AxisZ, YAMAHA NMax
It is easy to install.
It is convenient because you can start the engine with the Side Stand out. The installation and mechanism is very simple and you can install it easily because you don't need any troublesome wiring process because you only need to short-circuit the Side stands switch. View detail
Fits: HONDA PCX125, HONDA PCX125Hybrid, HONDA PCX150, HONDA LEAD125, HONDA ADV150, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA CT125CT110 HUNTER CUB
Side Stand.
It's easy to install, just remove the coupler and replace it, but it's impossible to remove the box under the seat, so getting to the coupler may be large strange. View detail
Fits: YAMAHA Cygnus X, YAMAHA NMAX155, YAMAHA MAJESTYS, YAMAHA AxisZ, YAMAHA NMax
APE 100
Installed on APE 100 Carburetor Vehicles OEMHarness
OEMHarness side is Green, KITACO is White, and Takekawa is Green.
Didn't Mr. Mukawa sell it? Was it expensive? So I chose this one.
The quality texture should satisfy those who are not good at making their own
I don't have any problems with performance features.
Durability is not a particular problem in the making.
View detail
Fits: YAMAHA Cygnus X, YAMAHA NMAX155, YAMAHA MAJESTYS, YAMAHA AxisZ, YAMAHA NMax
Large strange if you don't know
I used it for CYGNUSX (1YP2). I used it on my CYGNUSX (1YP2).
It was at the back of Footrest Mall 2. I wanted to remove the Switch from the Side Stand, but the inner
(Under) I gave up because I couldn't do it without removing the Fender and Foot Rest Board. As a result, I managed to get to the back.
I removed the Coupler of the Switch which is in the Just to make sure, the Coupler of Switch
I put the Tape on the Tie Wrap and cancelled it and stopped the dangling Coupler with the Tie Wrap. It's a simple thing.
If you don't want to remove the Switch, it's wise to do so without removing too many things.
View detail
Fits: SUZUKI swish, SUZUKI ADDRESS110, SUZUKI Address125, SUZUKI ADDRESSV125S
Useful Goods.
It is easy to install and simple to use. It is very convenient because I can start the engine with the Side Stand out. It is very convenient because you can start the engine with the Side Stand out. View detail
Expected
I wasn't sure about the installation, so I asked a motorcycle shop to install it. The Bolt on the car looked stiff.
The quality is good and on par with ManufacturerOEM. The only thing I liked better was the color Black than Plating.
The function is convenient and makes it easy to shop at Convenience because I don't have to put the Center Stand up every time I shop at Convenience.
Cost performance is a bit high, I think.
View detail
Fits: HONDA PCX125, HONDA PCX125Hybrid, HONDA PCX150, HONDA LEAD125, HONDA ADV150, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA CT125CT110 HUNTER CUB
The Engine does not stop even if Side Stand is put out
It only took about 10 minutes to install, and the engine didn't stop when the side stand was put out measure
It would be nice if there was a free Blind cap for the Coupler side
View detail
It's handy to have it in any case
Before I bought it, I didn't expect it to be too fashionable, but when I installed it, it was surprisingly easy to use is good
It is well built and functions well as a Side Stand
But Honda's designers have done a lot of work to make it possible for us to install it So there's no reason not to put it on
Compared to Left Side (OEM) STAND, Minus is a little more reluctant to raise and lower it
The OEM exhaust system will not interfere, but the clearance is a little over 1cm That's what I'm talking about (Note that there is a possibility of interference with the Down Type Exhaust System outside the company
View detail
Good job but a little expensive - - - ('Ε `;)
Since it seems that Flat forest road degree will go to Grom in the future, I bought it if I could protect Engine from Small stones and Small branches that Front tire winds up.
Try it ... Guard I feel like this is a performance.
There is an omission in the Plate of the Front part, so I wish to put it in Mesh.
It seems that it is a product mainly made of Dress-up, but it is not very noticeable from the height of the line of sight.
Also ... After replacing the Exhaust System or replacing the Oil with no problem with this Plate installed, it will be troublesome to work on Maintenance level.
There is no difficult thing about installation, but ... I have a lot of Bolt nuts, so assembly is a little troublesome?
View detail
Fits: SUZUKI swish, SUZUKI ADDRESS110, SUZUKI Address125, SUZUKI ADDRESSV125S
Just plug out the Connector and insert it.
ADDRESS V 125 G not in the conformance table (K7) But I could use it without problem.
Because the position of the Connector is different for each car model, you have to investigate yourself.
View detail
Fits: SUZUKI swish, SUZUKI ADDRESS110, SUZUKI Address125, SUZUKI ADDRESSV125S
The engine can be hung with Side Stand out
Although it is a simple part, it is easy to do something because it is multiplied by Side Stand in the Idling state when installed.
It is this evaluation because it is Level which I can make yourself even by myself.
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Very easy
It was troublesome to put Center Stand, but it is quite easy with this.
The installation was also not difficult, and it looks familiar as it is not gaudy.
Address is now more readily available.
When typhoon, I put a Seat cover and stopped by Side Stand and it collapsed
When there is a danger of strong wind we recommend Center Stand.
View detail