Reviews
Fits: HONDA CT125CT110 HUNTER CUB, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA CB250R
Bolts are ….
The quality is fine, but how much better it would have been if the Bolts were Black!
I was so focused on the features that I didn't pay attention to the coloring, which I thought was a mistake.
View detail
This curved Bracket is exquisite.
[How is it used?
Purchased this product for ease of use when installing a DAYTONA external power supply extraction Socket on my multi-purpose SEROW250.
I was looking for a short type mount bar, even if it looks a little messy, but I decided it would be better to use it easily. I was looking for a short type mount bar when I found it in Webike's product introduction section.
How was your experience with it?
I don't like the mess around the Handlebar, but when I used it, I found the USB Power Port easy to use and the Large Change convenient, and I understood why so many Mount bars are sold... (Thoughts of a middle-aged man who is about to be overtaken by the times).
The product was exactly as shown in the Image, with the smallest possible Refreshing Type.
How did it compare to other products?
This is a common Type used to bite into Mirror Holder.
The curved Mount Bar Connection Bracket is fixed to the L-shaped Bracket that is fixed to the Mirror Holder, and can be moved back and forth to allow the Mount Bar to be positioned at a convenient location for the user.:Can be set.
This curved connection bracket is exquisite and allows for a lower quantity position than is possible with a straight design bracket.:I am impressed with the wonderful Ideas because I can Set.
[Points to note]
By Mirror Holder For 8mm For 10mm Check the screw size of the Mirror of the vehicle you wish to install and be careful not to purchase the wrong one.
Manufacturer-wise. For LeftMirror The curved Bracket is not impossible to install on the Right Mirror (although the curved Bracket will be warped in the opposite direction).
Quantity to Position easy to use for Spec. cars.:Once set, please tighten and secure each part firmly, otherwise you will be in a panic if it loosens while driving... (this is my experience)
Other items that would be helpful
The deciding factor in the purchase
As mentioned above, the short type mount bar and the exquisitely curved bracket are the deciding factors.
【Included Parts:presence or absence】.
L-shaped Bracket for connecting Mount Bar Body and Mirror Holder, Washer and Nut are included.
[ITEMS TO BUY TOGETHER
Products to be installed on Mount bar.
If you purchase the products you want to install at the same time, such as a power supply outlet, Smartphone Holder, Drink Holder, Camera Mounting Holders, etc., you can proceed with the work at a stretch.
Opinions and requests to Manufacturer.
Ideas products are different from other car products.
From now on. Good products at affordable prices. Thank you in advance.
View detail
How can I use this...
The bar was installed in front of the handlebar, and I honestly wondered what I should put on this part.... I installed the Smartphone Holder in the opposite direction, and the position of the Smartphone Holder looked good, but this time, it was attached to the bar so that the area around the Meter could not be seen by the bar, I was agonizing over how to make the best use of it, but I decided to just put it on for the time being. View detail
Fits: HONDA CT125CT110 HUNTER CUB, HONDA glom, HONDA MONKEY125, HONDA DAX125, HONDA CB250R
Convenient for attaching attachments
We are using it to install a clock and HandyGPS on a CT110 HUNTER CUB.
Good machining accuracy and painting, and easy assembly.
When assembling, we recommend applying low-strength liquid screw lock to prevent screw loosening.
View detail
Not much was needed.
I didn't feel the need for it. I don't feel inconvenienced without them. View detail
Good quality, perfectly fitted
This multi purpose bar can be perfectly installed in place. The installation if the bar is not complicated, the tricky part is the speed metre has to be loosen in order to make space for loosening and tighten the four bolts of the handlebar. It may take quite some time uninstalling the speed metre, but installing the bar takes less than five minutes. The quality of the bar is excellent, you know it by its weight. Surely, it can carry more than 1.5kg. View detail
First, for Convenient Hook.
I used to have a VESPAGTS Convenient Hook (like Hook) that was very useful.
I wondered if I could do something similar with the CROSS CUB, so I gave it a try.
This bar has a diameter of 22.2mm, so it can be fitted with various universal Handlebar parts.
Some people said it was difficult to install, so I had it installed at the store when I took delivery of my car.
I installed the Convenient Hook myself after delivery and the distance from the Hook to the Main frame is
Because it is unexpectedly close, Bagetc. comes in contact with the Frame (the exterior covering the Frame) and rides on it.
As a countermeasure, the so-called "Vietnam Carrier." If you attach the kind of
It looks good and reduces the load on the Hook without scratching the exterior.
Of course, it is possible to install Navigation Holder and Drink holder etc. on this bar.
It is quite wide, so I think you can use multiple Parts at the same time.
View detail
Attachment expansion
I purchased this product for my USB power supply and Smartphone Holder installation.
Even when used in conjunction with the GSX250R standard Handlebar Spacer removal, there was no interference with the FFork.
If you have removed the Spacer, you can install it with the OEM Bolt as the supplied Bolt is too long.
Nut under the Top Bridge has a loosening stopper, so you might want to be careful when removing it.
View detail
For Universal Bracket installation!
Co-fastened to Handlebar fixing. I know there are many similar parts out there, but is this the cheapest?
I bought this for my phone mounting!
View detail
Easy to take off. Convenient Items.
It is easy to install. At the time of installation, there is also the impression that it disassembled and removed SpeedometerCase with difficulty because Bolt does not enter Holder of the front side if SpeedometerCase is not removed, but there is no need for it.
Remove the OEM Upper Holder and assemble the Multi Purpose Bar, Bolt, Spacer and Upper Holder before installing. (If you try to install it without assembling, the Bolt will not fit because the Speedometer Case is in the way. Screw hole position is also Exactly.
Pipe diameter is Φ22.2, same size as Handlebar Pipe diameter, I think it is convenient to install Hook, Carabiner and various holders. The rigidity is high and it looks like OEM parts.
View detail
difficult to use
It's too far forward and difficult to use, as if you didn't actually install and test it
I think it's just fine if it's in the middle without offsetting
View detail
VERY GOOOD
WOW THIS IS VERY VERY PERFECT ITEM.(Recommend) ITS WAS GOOD SHOPPING I AM HAPPY. THANKS. DELIVERY IS FAST, I EXPECTED THE OTHER ITEM View detail
There is no minute vibration at NORMAL and it is a good feeling.
I wanted a proper installation Instruction Manual.
Handlebar is Conti 2 type of HURRICANE, Switch, Brake, etc. were attached as it was.
View detail