Reviews
Purchased because I want Hazard
MSX125 (MLHJC92) The product has been installed in a
Holes can be machined and installed without problems using the Instruction Manual pattern.
Wiring length is fine, but the number of pins in the ConnectorCase is different by one. (It is like the difference between ThailandSpec. and Japanese specification.)
The 9-pin ConnectorCase had to be changed to a 6-pin type, but since the position of the pins is the same, once the pins are removed and inserted in the same position in Minus, the case could be used without any problem at all.
Blinker's Touch is different from OEM and this one has more Snap and feel.
View detail
Connector needs to be replaced
Purchased due to the change of gas pedal holder, the normal switch box changes the position of the lever.
It's just the right thickness, isn't it?
But if you want to put it on CB250R, you need to change the connector.
Wiring purchased and installed a set of connectors that fit the brake, kill and starter CB250R.
No problems with functionality.
View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
I'm writing well.
It's been a while since I bought it, and I thought it was necessary to change it at first, but the more I use it, the more satisfied I am with the dress-up parts. The regular genuine lever was really uncomfortable. It's far from my hand and the lever is thin. It was hard because I kept turning off the bike with the genuine lever, but it's so nice that it's almost gone after changing it. I highly recommend it. View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
It's comfortable
The feel of operation is very good compared to the genuine or Alibalever bar. Adjusting the clutch cable after installation is essential. It is highly recommended for those who have small hands or have difficulty using the genuine lever. The build quality is also excellent, providing a fitting feeling similar to a genuine low-quality product. As expected, it's the Kitako lever of faith. It's good ------------------------------------------ ---------------- The feel of operation is very good compared to the genuine or Alibalever bar. Adjusting the clutch cable after installation is essential. It is highly recommended for those who have small hands or have difficulty using the genuine lever. The build quality is also excellent, providing a fitting feeling similar to a genuine low-quality product. As expected, it's the Kitako lever of faith. Good. Powered by Google Translator View detail
Fits: HONDA PCX125, HONDA PCX160, HONDA ADV160, HONDA SUPER CUBC125, HONDA CROSSCUB110, Others
Keeps my hands warm!
Picked up these knuckle guards for my '22 Super Cub and they work excellent. They help to keep the colder air from freezing my hands. I do wish they had a matte black option, but that's certainly not a deal-breaker. They fit well with the factory mirror mounting points. I have an aftermarket mirror and a phone holder on one side, along with the Puig windshield and nothing interfered with the guards. They stick way out from the handlebars and I don't feel like my fingers will hit them when I'm braking or twisting the throttle. Just a note, the left side mirror mount is not in the same place as the right side, so the knuckle guard might touch and rub against the turn signal if you have an American version of the Super Cub. I was able to put just a small amount of pressure on the metal bracket to push it down with no problem. View detail
Wiring.
I bought it to do Wiring.
It is safe to say that it is for Motorcycle.
I wanted to use it just a little bit, so I was glad to find a shorter length for sale.
View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
KITACO Short Reach Lever Set
Thank you for the fast delivery^^
It looks more like a genuine model than the other levers -------------------------------------------- -------------- Thank you for fast delivery ^^ The other lever looks like a pure type Powered by Google Translator
View detail
Fits: HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125
black brake lever
It arrived quickly and easy to install, when installing the clutch kit the brake lever came in silver, now both are the same color. I recommend both kits. View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
Satisfied.
The original Monkey lever was too far away for me, who has small hands, so it was uncomfortable. It was difficult to stretch my fingers to grab the brake lever, and the clutch sensitivity was also difficult to get. I looked for it and found something like this, so I bought it. Looking at other people's reviews, they said it was very good, so I'm looking forward to installing it and trying it out. -------------------------------------------------- -------- Monkey Pure Lever was so far from my small hands, it was burdensome. It was hard to reach out to catch the brake lever and it was hard to catch the clutch. It was very nice to see other reviews. Powered by Google Translator View detail
Fits: HONDA monkey, HONDA monkey, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA
Product # 909-1083001
There was a need to replace the cables on my Honda Monkey. The original cables had damage to the outer jacket. To my delight, KITACO had these items in its product range. And KITACO was not let down, the quality of the cable turned out to be on top. There were no problems with the installation. View detail
Fits: HONDA PCX125, HONDA PCX160, HONDA ADV160, HONDA SUPER CUBC125, HONDA CROSSCUB110, Others
Wind protection
I installed it on my adv160. It was easy to install.
It is windproof. It is helpful in winter.
It is inexpensive, looks good, and is cosmetically pleasing.
View detail
Fits: HONDA PCX125, HONDA PCX160, HONDA ADV160, HONDA SUPER CUBC125, HONDA CROSSCUB110, Others
PCX125 (JK05) Purchased for. Low price and practical.
PCX125 (JK05 ) I found this product after giving up on OEM products and DAYTONA products because they are too expensive. This is a KITACO Knuckle guard. This is a product that is attached to Mirror with Bracket.
The cover area is above the handlebar and does not cover the lower part of the guard. This is a compromise.
View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
ShortReachLever
[How is it used?
I have small hands and it was difficult to operate in NORMAL, so I bought it.
Also, the lever adjustment function was not needed, so this product was selected
Was the one you received as per Image?
Beautifully crafted product as per Image or even better!
Was the installation difficult?
It was easy to exchange with NORMALLever!
How was your experience with it?
Especially the Brake lever is now easier to operate.
[Included Parts:were they on?
No Included Parts:since it is Lever only
[Was there anything that disappointed you?
There is none
Other items that would be helpful
Installation Point or hang
When attaching a new Lever, it is better to have Grease.
Clutch lever must be adjusted after replacement.
View detail
I purchased the JA-specific MODEL and it was easy to install and all the Passing worked.
Wiring with Couplet-on, Refreshing and satisfied with the functionality without any problems. View detail
Fits: HONDA GB350, HONDA FORZA-SI, HONDA PCX160, HONDA ZOOMERX, HONDA GB350S, HONDA PCX125, HONDA MONKEY125, HONDA PCX125 Hybrid, HONDA glom, HONDA PCX125 E:HEV, HONDA PCX150, HONDA DAX125, HONDA Universal(for Φ22.2 Handle), HONDA CT125CT110 HUNTER CUB, HONDA CL250
Mounted on GB350
Purchased because I wanted to install a Quad lock on my HandlebarCenter.
The Instruction Manual stated Torque 27N, but perhaps the Manufacturer specified Torque is 23N?
I took the time to tighten the bolts at 25N.
The color is glossy Black, but I would like to replace it if Matte Black is available.
View detail
for winter use
I have a Handlebar Cover as a winter spec. but the Brake lever is cold. It is easy to use even with thin gloves. View detail
First aid for Cowl cracks
[How is it used?
I used it in Repair of a Chinese Cowl that had cracked some time ago.
We chose KITACO's Stainless Steel Wire because we also planned to utilize it for Wiringetc.
How was your experience with it?
We drilled a hole around the cracked area and threaded it through to fix it so that it would not flap for the time being.
I think it would be a little more exact if I applied a guess board, etc., but it was too much trouble, so I covered the top with tape to cover it up.
If you want to fix it properly, Plastic repairetc. There are many ways to do it, but it was enough to fix it for now in a short time.
How did it compare to other products?
I thought that the appropriate needle Gold would be fine, but I decided to use this product because it can be used in a variety of ways.
It has a fairly large capacity, so I don't think you will run out unless you are on Raceetc.
[Points to note]
Not particularly
【Review】
Large capacity and reasonable price.
It can be used for various purposes such as fixing Wiring and Grip.
View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
Kitako you can buy with confidence
The clutch interval is shortened, making it convenient to use when starting off.
The build quality is very good, much nicer than the original lever.
It will be more useful for people with small hands.
I also left a recommendation to people in my club. The front brakes are also closer, making them easier to use. -------------------------------------------------- -------- The clutch spacing is shorter, making it easy to use when departure. The build is very good, much cooler than the original lever. It will be more useful for small hands. I also wrote a recommended article for people who are active. The front brake is also closer, making it easier to use. Powered by Google Translator
View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA Super Cub 50, HONDA monkey, HONDA Little Cub, HONDA Ape 50, HONDA monkey, HONDA LITTLE CUB50, HONDA LITTLE CUB, HONDA MONKEY, HONDA CL50, HONDA BENLY90 S, HONDA BENLY50S, HONDA CUB press 50, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA JAZZ, HONDA GORILLA
SUPER Level
I bought these levers for a Honda Monkey. I buy them not for the first time, so they really like their design, quality, convenience of use - the made bending of the levers makes it easier and more comfortable to use them, to press the lever. Shiny chrome looks very good and the moped will look like new. I bought these levers for a Honda Monkey. This is not the first time I have bought them, I really like them for their design, quality, and ease of use - the bending of the levers makes it easier and more comfortable to use them and press the lever. The shiny chrome looks very good and the moped looks like new. View detail
Cheaper than OEM, and if you're going to replace them anyway, it's safer to replace both.
When I removed the exterior to remove the engine head, I found that the slot cable was almost broken, so I thought about ordering OEM, but it would take a few days, so I ordered this product, which was in stock.
It arrived the next day, which made the work easier.
If you're going to replace it anyway, Quantities:We chose to replace both pcs because it is more efficient, safer, and cheaper than OEM!
I gave it 4 stars because it looks comparable in appearance, although I won't know how durable it will be until I use it for a few years.
I have my Handlebar up about 3 cm, but it went on with the same length as the OEM Product with no problem.
The OEM is painted black, but this product is plated, so I will have to try it out to see which is better for rust.
View detail