Reviews
Fits: Others KEIHIN(KEIHIN)PWKΦ28MCarburetor, Others KEIHIN PWKΦ28Carburetor(Old type), Others KEIHIN(KEIHIN)PEΦ24Carburetor, Others KEIHIN(KEIHIN)PEΦ22Carburetor, Others KEIHIN(KEIHIN)CRMINIΦ22Carburetor
Perfect if you want to change PWK's Chalk.
Product Name
KITACO KITACO Choke Cable Assembly
Item Number
905-1122900
Vehicles
GIORCUB
Number of man-hours
About 10 minutes
Why did you choose this product?
We have prepared a Chinese YD Chalk, which is attached to the GIORCUB we are currently working on, so that it can be pulled from the outside.
Impressions after using it
This chalk will return to its original position as soon as it is pulled, so it is necessary to keep pulling when applying the Engine.
It eliminates the Chalk pull, but I felt it was not as user-friendly as it could have been.
However, installation is easy and the Wire is long, so there seems to be some freedom in the mounting and fixing position.
I would recommend it if the Chalk is hidden by the body of the car as I am.
▼ Attention
Chalk will return on its own, so it must be kept pulled at all times.
View detail
Fits: YAMAHA TZR50, YAMAHA TZR50, YAMAHA TZM50, YAMAHA RZ50
Cable length is a little short for WOLF50
I thought, "It's the same VMcarburetor, and if it's a WOLF50 and a TZr50, the Large body size should be the same, too! I just bought it.
As a result, Cable length is slightly short. If we had 20~30mm more, it would be…
I think it is a wonderful product with very good cost performance as a product.
It does not have the rich appearance of the more expensive High Solo, but it is functional enough.
Cable was short and lacking, though.
View detail
Dress-up and a slight decrease in cost...?
I've been using an OEM Product from a used car body I got used for a long time, but lately it's been sluggish even when I oil it, so I decided to take the plunge and replace it with a new one!
At first, I ordered OEM, but then I got a surprise. 'Isn't this one cheaper on Total?' I thought of this and cancelled the OEM order and reordered this one.
The feeling of the product is the same as the OEM product.
Well, it is an Accelerator Wire, so it is not surprising that there is no difference in Large...
The look is silver mesh and matches the mesh of the Brake hose, so I am personally satisfied with the color and the fact that it is cheaper than OEM.
View detail
Fits: Others , SUZUKI GSX400, YAMAHA XJR400, HONDA CB400SF
since a switch will become very hard if a set screw is fastened too much -- business -- they are cautions. The rest is satisfied.
since a switch will become very hard if a set screw is fastened too much -- business -- they are cautions.
The rest is satisfied.
View detail
Since it was ? time-tested product parts attached wholly, he bought it. A red wire is dressed up and is cool. Although attached and run, it is unchanging in it being pure. But I think that it is durable since the wire is a stainless.
Since it was ? time-tested product parts attached wholly, he bought it.
A red wire is dressed up and is cool.
Although attached and run, it is unchanging in it being pure.
But I think that it is durable since the wire is a stainless.
View detail
Fits: HONDA DAX, HONDA CHALY 50, HONDA APE 50, HONDA APE 100
installed from pe24
I bought the kitako high troll set while installing the takegawa pe24. It said ape100 can be installed, but when mounted on a normal handlebar, it is not fixed and rotates with the strowl. ------------------------------------------------------------ - I bought a Kitako Heistroll set while mounting the Takegawa PE24, but it was possible to install the APE100, but when mounted on the Normal handlebar, it is not fixed and turned around with a stroll. Powered by Google Translator View detail
Switch
This is installed along with the relocation of switches.
Light can be turned on and off. The BlinkerPush can now be used to reset, and the operability is good.
It may depend on the handlebar, but there seemed to be interference with the tank when the handlebar was turned down to its full length, and some fine adjustment was necessary.
It would be nice if it were a little less protruding and a little more compact.
View detail
Fits: Others (Φ22.2)
Lever corners are painful, Bolt rusts easily
Used for Bar handle of CUB.
The pulling force is the same or stronger than Regular's Lever. So braking is not a problem.
The overall texture is not bad either.
There are just a few difficulties.
1. Bolt rusts easily
2. Wire's Thailandco twists and turns.
3. Lever's corners hurt my hands.
4. LeverSwitch (Brake switch) is chunky.
The Bolt rusts easily. It's not painting or plating, it's an oxidized film like Black skin iron.
There is a Wire Thailand connector in front of the Lever's WireSlot, but
This makes it structurally easy for the Thailandco to get twisted. I can pull it but it doesn't feel good.
The other thing is that Lever is so angular that it hurts my hands.
Can't they at least do something about the corners of Lever?
Well, there are negatives, but it's a pretty easy Lever to use and I like it and keep using it.
I even exchanged it for a Regular Size Lever for a moment, but instead of a longer Lever
I quickly switched back to Short lever because the pull was weak on the
View detail
Fits: HONDA NSR80, HONDA NSR50, HONDA NS50F, HONDA MBX50
No need to regrip.
I bought this for my NSR50 for separate refueling.
The Grip that comes with it is lame, so I use another company's product.
I thought the installation would go smoothly, but I had a hard time getting the wire to work properly.
I was able to find a compromise and make it usable, but when I turn the Handlebar all the way to Left, the Wire interferes with the Frame and the Throttle opens.
The quality of the cover and the bracket at the base is cheap, but I think it is worth the price... (Polish)
It is easy to open the throttle fully without regripping it while riding, but it may take some getting used to.
View detail
Fits: HONDA XR50 MOTARD, HONDA APE 50, HONDA MONKEY, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA CD50, HONDA BENLY50S, HONDA CL50, HONDA JAZZ, HONDA GIORCUB, HONDA solo, HONDA APE 100, HONDA XR100MOTARD, HONDA SUPER CUB110, HONDA DIO, HONDA SUPER DIO, HONDA LIVE DIO, HONDA G DASH, HONDA Giorno
A little. The opening has changed.
The OEM Throttle requires a regrip to fully open the Throttle.
"A little ride. If it is, well, that's fine, but if this is a long distance Two, I can't stand it.
It is worn to reduce the range of motion in the wrist and to reduce fatigue as much as possible.
The High Solo isn't just for running fast on anything!
As a result, the opening has improved a little. But I am not satisfied with it. But I am not satisfied.
This is a great option for those who just need a little improvement on the current situation.
View detail
Essential Items for Race Activities
Wiring is a must-have item for race regulations, and although there is a small amount of wire in the package, I think it's better to buy the bottom type if you are still racing. I think these are frequently used items. View detail
You don't use it up as much as you think
It's used for the Grip, Drain bolt, and Oil Filler Cap when wai-ring to I am
It is easier to pass the wire through the hole and use it with Grip than the normal one If you do
I like to use it because it doesn't hit my hands
The wire is thin, so it is natural, but if the wire is twisted, it will be cut off, and the wire will be broken It's easy
View detail
Is it still made in China?
I bought it from KITACO, and it seems that there is an example of contact failure on the Net sometimes I'm sorry
I put the one for the CROSS CUB on the AA09SUPER CUB so I can't pimp it out Wiring was added by replacing Coupler with Bullet Terminal
I almost cried when I paid 15,000 yen and only Passing didn't work
I've replaced the Coupler with a Bullet Terminal and other things, so I don't think I can return it And I'm crying myself to sleep!
I should've gone with DAYTONA!
View detail
usually
I bought it for the Grip's wire lock, you don't need it in a large amount and you can use it a few times With both Grip and Grip, I think there's a lot of room for 4 times or so The fineness was just right View detail
It took it properly.
Exchange the Clutch Cable after exchanging it when you lower the Handlebar. The Accelerator Wire came to return properly even if you disconnected Handlebar. I regret that the tip is Plating. It can not be adjusted on Handlebar side. Well it's because it's cheap so can not be helped. View detail
Fits: YAMAHA TZR50, YAMAHA TZR50, YAMAHA TZM50, YAMAHA RZ50
Goods are nice, but - - -
It installed in YSR 80
OEM's Accelerator Wire is no longer manufactured and there is no inventory
As I looked at the compatible model of this product, since the YSR 50 came out,.
The item itself did not have any problem
(It was more than expected in terms of performance)
Instruction Manual There is nothing like a thing but
Somewhat, it took a while to install.
Although Cospa is wonderful, only that point is regrettable
View detail
Fits: Others (Φ22.2)
Used for changing Clutch lever
I use it with MONKEY's Custom. We plan to attach Mirror to Left Side and selected KITACO Clutch lever Long. Easy to install Cable because it is a Type that inserts Cable's Thailand from the front side. I feel a grasped feeling very lightly. However, since the part to be attached to the Handlebar is not a division type, it was a drawback that it was impossible to install the Lever without removing the Grip and the Switch. View detail
Product of average point?
It is satisfactory in terms of Cost as High throttle set, but since the winding part of High Throttle Pipe partially interferes within Housing, it was shaved with File.
Others can be used without problems.
I think that it can be used for most carburetor because it can be compacted by about 30 mm at the initial wire discharge amount of about 90 mm.
850 Type is perfect for attachment to CB 90, the point that the Wire shape on carburetor side is head swing is just right feeling.
If the Handlebar Grip is thicker then it would be four stars...
View detail
If you would like to change the appearance of Lever, please.
Purchase to reduce coldness from Lever in winter. However, there was hardly any effect in the outside air temperature 1 ℃ ~ 2 ℃. However, by covering Lever, I am satisfied with self-satisfaction as to whether it is a bit fashionable. Also, when Liding touch is not wearing Riding glove, Lever touch thinks that there is no sense of roughte than bare hands, as long as there is Sponge.
View detail
KITACOEngine Starter Motor
Since we installed High Throttle Kit on APRIO, we have purchased Engine Starter Motor as it is newly installed.
Wiring It is attached as it is without processing, but there is a place where the exterior relation interferes, so it is necessary to process such as scraping, it works without problems.
View detail