Reviews
Fits: Others , SUZUKI GSX400, YAMAHA XJR400, HONDA CB400SF
since a switch will become very hard if a set screw is fastened too much -- business -- they are cautions. The rest is satisfied.
since a switch will become very hard if a set screw is fastened too much -- business -- they are cautions.
The rest is satisfied.
View detail
Fits: Others , SUZUKI GSX400, YAMAHA XJR400, HONDA CB400SF
It purchases in order to attach to XR250. After all, in order to reduce the burden of a battery, it attached. In perfect coupler on, anyone can do connection simply. If there is no space just for a moment although a switch is attached to handl
It purchases in order to attach to XR250.
After all, in order to reduce the burden of a battery, it attached.
In perfect coupler on, anyone can do connection simply.
If there is no space just for a moment although a switch is attached to handle left-hand side, it is tight.
It has been confused just for a moment.
It is from whether it becomes a measure against water proof by placing the exit of wiring upside down, and a thought to have attached the switch to the up-and-down contrary.
(since a place with quite a many water is run in case of off) Probably, it will be safer to wind by a vinyl tape, since the connection section of the headlight coupler is not waterproofed.
In addition, although it will dedicate to the flesh side of a headlight cowl, it is tight if there is no space also here.
It is likely to disconnect, while turning a wheel repeatedly, if it stores forcibly.
If the hit also takes care and is attached, I will think that it is satisfactory.
Although an honest effect cannot be felt clearly, I think that it is good for a battery absolutely.
I think that they are goods as which easy wearing may be sufficient.
View detail
Fits: Others , SUZUKI GSX400, YAMAHA XJR400, HONDA CB400SF
The design of attachment is also good at an easy.
The design of attachment is also good at an easy. View detail
Fits: YAMAHA TZR50, YAMAHA TZR50, YAMAHA TZM50, YAMAHA RZ50
Pains was taken over attachment although he planned to have understood structure. Although he wanted a little more intelligible description, a price may also be cheap, and it may be very easy if it gets used.
Pains was taken over attachment although he planned to have understood structure.
Although he wanted a little more intelligible description, a price may also be cheap, and it may be very easy if it gets used.
View detail
Since it was ? time-tested product parts attached wholly, he bought it. A red wire is dressed up and is cool. Although attached and run, it is unchanging in it being pure. But I think that it is durable since the wire is a stainless.
Since it was ? time-tested product parts attached wholly, he bought it.
A red wire is dressed up and is cool.
Although attached and run, it is unchanging in it being pure.
But I think that it is durable since the wire is a stainless.
View detail
It's absolutely RECOMMENDATION over NORMAL!
[How is it used?
The normal cable is getting old and is not working well, so we decided to upgrade the cable as a replacement.
Was the one you received as per Image?
Parenthesis is good because you can see that it has been replaced by the color as shown in the Image!
Was the installation difficult?
It is only an exchange with the NORMALClutch cable, but for the first time, you may be confused at the spring part on the clutch receiver side.
How was your experience with it?
The Normal cable was old and no good, but this one with Stainless Steel Wire is lighter and seems to be more durable.
[Included Parts:were they on?
Quantity:Since it is a Set, RubberBoots, etc. are installed.
[Was there anything that disappointed you?
Not at all. I am satisfied.
▼ The construction is pretty solid, and I think it's a better product than the NORMAL!
View detail
Fits: Others (Φ22.2)
For use with external high throttle!
[How is it used?
I changed the Handlebar to Mini condor and it became difficult to use High throttle and NORMALLever together due to Clearance problem, so I decided to buy it.
Was the one you received as per Image?
Material more beautiful than Image:It was Aluminum.
Was the installation difficult?
Simply replace the Wiring and fix the Bolt.
How was your experience with it?
It is a little painful that the Lever is square. The rest of the time, I can use it without any problems.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
▼When I was in an accident, the shaft part of the lever broke off from the root of the shaft.
View detail
KITACO Lighting Switch Kit
After searching the web, I found Webike offering genuine Honda parts at realistic prices. Excellent service. Wish I'd found them sooner! Webike offer parts for other makes too, at decent prices, so I'll be letting other riders know about them. Decent delivery costs and time from Japan makes a huge difference to keep projects running! View detail
Fits: HONDA DAX, HONDA CHALY 50, HONDA APE 50, HONDA APE 100
installed from pe24
I bought the kitako high troll set while installing the takegawa pe24. It said ape100 can be installed, but when mounted on a normal handlebar, it is not fixed and rotates with the strowl. ------------------------------------------------------------ - I bought a Kitako Heistroll set while mounting the Takegawa PE24, but it was possible to install the APE100, but when mounted on the Normal handlebar, it is not fixed and turned around with a stroll. Powered by Google Translator View detail
Used for ModernWorkScratch
I bought it for the same secondary Clutch, ModernWorks for Clutch.
In the end, we could not use it as it was, but cut 2 cm of Outer and used it.
View detail
Fits: HONDA XR50 MOTARD, HONDA APE 50, HONDA MONKEY, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA CD50, HONDA BENLY50S, HONDA CL50, HONDA JAZZ, HONDA GIORCUB, HONDA solo, HONDA APE 100, HONDA XR100MOTARD, HONDA SUPER CUB110, HONDA DIO, HONDA SUPER DIO, HONDA LIVE DIO, HONDA G DASH, HONDA Giorno
Comfortable for city driving
FrontSprocket 1 put in the state of being raised
I think the mid-range acceleration in city driving has become more powerful.
I felt the grips that came with it were too thin for the cushion.
At best, the sense of Direct is increased.
At worst, the grip feels hard.
After all, it is cosmetically good, so I am satisfied.
View detail
good
The delivery is fast The product is good, too I'll introduce it to people around me Please take good care of me next time, too View detail
Fits: HONDA LLever&Holder made by KITACO, HONDA GORILLA, HONDA MONKEY
No need to say anything as it is an exclusive product.
When I replaced the Engine of MONKEY with CD90, I will not have enough Cable of Clutch which I had enough until now. I bought a 10cm Long for it.
Cable for KITACO's LeftLever&Holder.
View detail
For improved grip and a subtle fashion statement!
I customized this product for my off-road motorcycle lever, and I love the improved grip and subtle fashion! View detail
Is good
It is very good for non-slip effect when used on the Lever.
The thicker lever makes it easier to grip and maneuver.
The coloring gives it a custom feel.
View detail
Fits: SUZUKI SEPIA, SUZUKI SEPIA, SUZUKI SEPIA, SUZUKI SEPIA, SUZUKI ADDRESS V100, SUZUKI Address50, SUZUKI Address50, SUZUKI Address50, SUZUKI Address50, SUZUKI ADDRESS110
Cosmo!
I tried to replace the grip because it was worn out, but since the diameter of the handlebar is narrow, it was not sold at mass retailers, etc.
After much research on the Internet, we found that this product was compatible and purchased it.
Installation went easily with no modifications.
The grip is an OEM-like design, and the feel is firm.
High Solo is very good to drive with less fatigue.
View detail
Also dedicated to Motorcycle
Initially, I sought cheap ones from Homesense, but I have heard that they are easy to break.
I was able to attach the grips without worry, as they showed no signs of breaking even though I twisted them a little too hard during practice.
This was my first time Wiring and I am satisfied with the finished product.
When I purchased it, I thought it might not be enough, but this amount seems to be able to do quite a few times.
View detail
PeLePera and cheesy.
The shape is not bad, but the texture and construction is very Chinese cheap plastic, and the PelePera moves with the vibration of driving and wind. View detail
Fits: HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUBC125
honda supercurb c125 brake knob
Honda Super Cub c125 I was looking for a brake handle that matches the mat gray color, and I found the perfect product. It has the same shape as the original handle, and the handle quality is excellent. Highly recommended if looking for a genuine.. I was looking for a brake handle that matches the Honda Super Cub c125 matt gray color and I found the perfect product. It has the same shape as the genuine handle, and the handle quality is excellent. It goes very well with the matte gray color. I highly recommend it if you are looking for a genuine type. View detail
Great if you have lowered handle bars
Although this is for a grom, it will fit on a Monkey 125. I installed Protaper Honda Mini bar's and the oem cable slack annoyed me. Plus it was hard to adjust the throttle without ending up with cable binding. The kitaco cable fit much better and look great. I was able to remove more of the throttle free play without getting binding issues. View detail