Reviews
The construction is too crude to use as it is.
I bought it at the end of last year with the intention of trying things out.
I was planning to assemble it before spring, but I am hesitant to use it because of the messy construction as shown in the pictures.
Throttle boty, Inlet, everything needs to be fixed.
This guy is High SoloSpec.
There is no mention of this in the product description.
A pledge! This kind of thing is what they make you write before you buy.
I have no idea what they are thinking or what their intentions are.
View detail
Fits: HONDA XR50 MOTARD, HONDA APE 50, HONDA MONKEY, HONDA DAX, HONDA GORILLA, HONDA MONKEY, HONDA CD50, HONDA BENLY50S, HONDA CL50, HONDA JAZZ, HONDA GIORCUB, HONDA solo, HONDA APE 100, HONDA XR100MOTARD, HONDA SUPER CUB110, HONDA DIO, HONDA SUPER DIO, HONDA LIVE DIO, HONDA G DASH, HONDA Giorno
Used for SUPER CUB 110PRO
I bought this to improve my re-grip, but was suddenly disappointed with the same diameter as the OEMNORMAL Throttle, what is High Solo about this?
I was expecting this because it is a Manufacturer of Aftermarket parts that I often see, but I got the same impression as if I had grabbed a Chinese-made Inchki product.
Was KITACO such an InchkiManufacturer?
Instead of recommending them to my friends, I vowed never to buy KITACO products again.
View detail
Fits: HONDA PCX125, HONDA PCX160, HONDA ADV160, HONDA SUPER CUBC125, HONDA CROSSCUB110, Others
This is disappointing to KITACO.
Material is also terrible.
What is wrong with KITACO these days?
Disposal.
View detail
Fits: HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50
I want to cancel it.
I found out the delivery date, it will be 8 months away.
and the email came at 16:48.
If it's going to take that long, I'd rather Cancel.
I didn't do anything and got an email at 5:45pm saying my order was accepted.
I really want to Cancellation.
What should I do?
View detail
It is a shame item
The Tap is for mounting the Mirror, but the screw that clamps to the Handlebar is M5 and the tightness is weak, so the Mirror turns at high speed.
I have no use for anything but a moped.
It was a bad idea. I stopped using it right away.
Double-sided tape between the Handlebar and the Mirror Holder may be a good idea.
View detail
Fits: HONDA PCX150, HONDA ADV150, HONDA PCX160, HONDA CT125CT110 HUNTER CUB, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CT125CT110 HUNTER CUB, HONDA PCX125, HONDA PCX125-E:HEV, HONDA PCX125
Not to be High Solo
I bought it to convert to High Solo, but the JK05 didn't change it at all. View detail
About our products
I bought this after reading the reviews of the product, but I thought there was no way that the Engine Starter Motor would not work from the beginning, so I installed it. However, when I tightened it, the Engine Starter Motor stopped working and became useless. It was a good lesson for me! View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUBC125
Super throttle pipe for KITACO Monki-125
I purchased this product without reading the product description carefully.
It's for the MONKEY125.
I have no plans to use it in the future, so I wasted it.
View detail
This is not a Level that can be used at all
I bought it because I thought that KITACO would be a large and sturdy product
Drill 4mm hole in Handlebar and attach it to Handlebar, tighten the bolt and operate each part To check, I pushed the Cell button, but it doesn't come back I have to loosen the bolt quite a bit to make it come back, which means I don't know when the bolt will drop out I don't know the level, and it is the same as the very cheap parts of Chinese no-name brands sold at Oakshon, etc etc.Level
If you're going to buy such a shoddy product, you're going to have to pay a little more for a HondaOEMSwitch Good
View detail
It is too cruel.
Originally purchased for using Outer cable only.
Cable's weak point is that the cable surface is rattling, so Clutch lever Touch "Kakkkakakutsu" It will be.
So I decided to make the Inner cable in a single Cable and use only the Teflon coating inside the Outer cable to improve Lever's Touch, but an unexpected incident occurred at the end of the Outer cable.
The diameter of the end of Outer cable is 7 mm shorter than OEM.
OEM 8?.
If there is an error of 1?, Every time Clutch is operated, it gaps and the side of the Lever holder is scraped off. In the long term, the hole of the Holder becomes large and the Lever holder has to be exchanged.
Photo Quantity : 1pc. The eye is an image of the end diameter of KITACO Clutch Cable.
Image on the Holder side inner diameter is measured on the second sheet.
The third piece is an image with Normal cable.
Quantity : 1 Set of 4pcs. Eyes are images containing KITACOCable.
Cable is certainly more resistant to bending if it is more than double, but there is no need for it to be more than double if it is OEM's handling.
Even if Inner is not Stainless Steel, as long as Maintenance is done with Oil, there is no problem at all.
I made something awesome Clutch Cable, but I can not do anything with singing phrases alone.
Mouth "Arorn Boring" It has solidified as it is.
I watched terrible external parts for the first time in a long time.
With this, you can not use it as it is, and Holder will become useless if you use it.
When Wei Big contacts KITACO, KITACO 's answer is "There is no harm in using. It is said that it was an answer. With this there are hurdles too much - - -.
View detail