Reviews
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA CB50, HONDA CB50, HONDA CB90, HONDA CBX125, HONDA CBX125
For MTX200RII
The rear brake of MTX200RII was extremely ineffective, so I checked it and found that it was the same shoe as the CUB, so I replaced it immediately. View detail
Fits: HONDA CRF100F, HONDA CRF100F, HONDA CRF70F, HONDA CRF70F, HONDA CRF80F, HONDA CRF80F, HONDA DJ-1, HONDA DJ-1, HONDA DJ-1, HONDA DJ-1, HONDA DJ-1, HONDA DJ-1, HONDA TLM50, HONDA TLM50, HONDA XLR80, HONDA XLR80, HONDA XR100R (for competition), HONDA XR100R (for competition), HONDA XR70R, HONDA XR70R
Exchange from OEM
[How is it used?
The XR100R has front and rear drum brakes, and perhaps because I am used to disc brakes, the brakes do not work very well.
I had a near-miss on a forest road when the rear brake didn't work...so I decided to replace it for safety. When I opened the drum, I found that the OEMShoe was still full, but there was a burn mark on it. I opened the drum and found that the OEMShoe was still full, but there was a burnt mark.
How was your experience with it?
The control of the brake has also been improved and it is easier to handle. I haven't driven on forest roads yet, so I will check it out when it gets warmer.
How did it compare to other products?
I considered other Shoes, but the price was lower, so I went with this one.
[Points to note]
It is quite troublesome to replace the shoes, and it is difficult to install the spring that holds the shoes together. Be careful not to skip the spring by mistake.
Don't forget to clean the inside of the Drum as you remove it.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
nothing special
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA CB50, HONDA CB50, HONDA CB90, HONDA CBX125, HONDA CBX125
It is inexpensive and Brake works well.
I replaced the front and rear of the LITTLE CUB at the same time. there is a groove on the Brake Shoe, so I think it works better. View detail
Fits: SUZUKI swish, SUZUKI ADDRESS110, SUZUKI Address125
No problem at all.
I don't know about durability etc. since I have only used it for about 200 km...
The resistance of the Brake is not too strong nor too weak.
I think that would be just fine for Gen 2...
If you want to be a big fan, this may not be for you.
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA CB50, HONDA CB50, HONDA CB90, HONDA CBX125, HONDA CBX125
to be tested
I am using a honda ape 50. First, the brake pads are a safety issue, so I don't mind using more expensive brake pads, and I have also replaced the original cylinder, every time I need to brake when driving It needs a lot of preparation in advance, although the brake pads are installed, but I have not had time to test the effect View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA Super Cub 50, HONDA CB50, HONDA CB50, HONDA CB90, HONDA CBX125, HONDA CBX125
It's always this
[How is it used?
It is used for SUPER CUB110.
I always buy this product when I need to replace it.
How was your experience with it?
JA10 has uneasiness in Brake because Drum is very small, but I feel that this Brake Shoe stops comparatively well among them.
I haven't compared it with other companies' products, but I am satisfied with its performance.
You can continue to use it for a certain length of time if you check and clean it frequently when you replace the tire.
The price is cheap, so you can replace it as soon as it starts to work suspiciously.
View detail
Fits: SUZUKI swish, SUZUKI ADDRESS110, SUZUKI Address125
No difference in efficacy or performance change from OEM.
I decided to replace the Brake Shoe of Address110 because I exceeded 17000km of driving, so I chose the non-FadingType. Because it is a commuting main, I do not feel the change with OEM especially. So I can say that it is safe and good Parts. The durability is not understood because it has just exchanged. View detail
Fits: SUZUKI swish, SUZUKI ADDRESS110, SUZUKI Address125
I'm not sure how thick it is, though.
I bought it as a spare as my mileage is about to go over 10,000km!
I removed the Brake that's currently attached to it and checked the thickness of the brakes and found that there was still enough left, so it won't be around for a while …
The only thing that bothered me was that the Brake that ran 10000k and the Brake I bought this time were almost the same thickness. Is this Brake that I bought thin? I thought.
View detail