Reviews
Fits: SUZUKI GSX1400, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSR400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled)
If only it were a little cheaper…
I am purchasing this because I need it to replace the Slip-on Silencer.
The quality is fine and it prevents exhaust leaks well, but it is a consumable item and I would like it to be a little less expensive.
View detail
Fits: YAMAHA GRAND MAJESTY400, YAMAHA TT250R RAID, YAMAHA TT250R
Used for WR155
[How is it used?
I used it to replace the YOSHIMURAExhaust System on my WR155.
How was your experience with it?
It is usable without leaks of exhaust Gas.
How did it compare to other products?
I have never used KITACO and OEM, but KITACO quality is close to OEM quality.
[Points to note]
If not tightened firmly, it will leak.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
nothing special
View detail
Flange Fixed Spring
The spring used in the ChamberFlange section was old and was purchased to replace it with a new one.
It looks Black, length, diameter and nice.
The length and cut of Anti-Vibration Rubber is not bad.
I also wanted a slightly shorter length and purchased 1pc. of another company's product to try it out, but I was disappointed with the length of the rubber and the slanted cut.
View detail
Exhaust Spring
Since we changed to Chinese Silencer, the length of Spring is not long enough, so we bought a longer one.
This length was not available from other Manufacturers and there were few options
It would have been better if it had been made STELLA-less in this length.
View detail
Installation Replacement
This is a purchase to replace the other installation with a new one.
Quantity:I would have been happy if it was not 1 Set of 2pcs. but it is cheaper to buy this Anti-vibration Rubber Set than to buy Single Item, so I had no choice.
There were times when the vibration-absorbing rubber cutouts were slanted and terrible, but I was glad to see that this one was not slanted.
View detail
exchange
I purchased this for Spring replacement for Exhaust System installation.
The price is not that high, so it's good.
Would you have preferred it with Anti-vibration Rubber Tube? Yes, I would have.
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
usually
I don't know because I had it installed, but I wish it had been included with the purchase of the exhaust pipe. View detail
Reasonable and elegant sound quality
I purchased this product because the sound of the Normal muffler is like a business motorcycle. The sound of each engine shot is now a "high drilling" sound and it is a pleasant sound. The volume is not too loud, which is good! View detail
Good cosmetics if you don't take it on and off often.
[How is it used?
Used on OEM Exhaust pipe and Silencer joint of MainMotorcycle's XJR1300C that had been inspected.
The Exhaust System itself is the same as the normal XJR1300, so Gasket could be used normally.
How was your experience with it?
The exhaust leaks were normally prevented, and this black shiny joint gasket from KITACO was able to keep the exhaust from leaking once it was used.
Even if successfully removed, it is basically non-reusable. This is a type of Gasket that is quite crushed and sealed.
How did it compare to other products?
I decided to go with KITACO because the OEM Product costs 2300 yen.
However, the OEM gasket is a metal type that can be used over and over again as long as the shape does not get messed up when tightened.
I think they are essentially disposable. In fact, it can be used normally.
So it is cosier to buy OEM if you have to wear it on and off a lot.
[Points to note]
Anyway, Gasket sticks to it and I can't peel it off. I wish you could do something about this.
Even if I wanted to make a new Gasket, it just falls apart and won't come off at all.
Can it be removed quickly if I apply something to it before installation?
View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CBR250R, HONDA CB250F
When replacing the Exhaust System
[How is it used?
It was used for Exhaust System replacement.
Was the one you received as per Image?
As per Image.
How was your experience with it?
Not too much, not too little. Excellent cosmetics.
[Points to note]
None in particular
How did it compare to other products?
I have not used any other products.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA Monkey Baja, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MOTRA, HONDA MAGNA50, HONDA MAGNA50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CB90, HONDA BENLY90 S, HONDA BENLY50S, HONDA CUB PRESS, HONDA CUB PRESS, HONDA CUB PRESS
Quantity:1 Set of 2pcs. and inexpensive.
I used it on a LITTLE CUB and the size is perfect, no problems. View detail
Fits: YAMAHA ROYALSTAR1300, YAMAHA ROYALSTAR1300, YAMAHA XG250 TRICKER, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA V-MAX 1200, YAMAHA TX650, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400
Note the different finish from OEM
The Yamaha OEM gasket itself has no bumps, but the KITACO gasket is a combination of two gaskets, with a protrusion on the inside and outside that looks like it was welded on. View detail
Fits: SUZUKI GSX1400, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSR400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX-6RR, KAWASAKI ZX-6R, KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI Z1000 (water-cooled)
Purchased in preparation for Exhaust System replacement
We will be replacing the Exhaust System on the NINJA1000 soon!
Naturally, I had to replace the Gasket, so I purchased it in preparation.
Since NINJA's exhaust system is a dual exhaust system, two Gaskets are required.
Gasket itself could have been anything, but I chose this one because it seems to be a standard product used by many people.
I can't wait to replace it.
View detail
Fits: YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY400
To replace Exhaust System
This is Quantity:1pc. of Y-15.
The de Raster needs two Gaskets.
A new one is safer than RustRust's Gasket.
This is a must-have for Exhaust System replacement, so I think it is a good buy.
Recommended
View detail
Fits: KAWASAKI KDX200SR, KAWASAKI KDX125/SR
It matched.
Product Name
KITACO Full Exhaust System Gasket (1 Set of 2pcs.)
Item Number
963-4000006
Vehicles
KDX125SR
Number of man-hours
About 10 minutes
Why did you choose this product?
The OEM chamber broke, so I bought a Gasket to replace it with a spare chamber.
Quantity, including spares:2pc. SetI wanted to get this product.
Impressions after using it
There is nothing much to say about the quality and comfort of the product, and it can be used normally.
There has been no exhaust leakage from the mounting area, so I think the product is functioning at least as well as it could.
▼ Attention
When installing the gasket, apply a thin layer of heat-resistant gasket to the cylinder, and you will be able to install the exhaust system without difficulty.
View detail
Fits: HONDA CBX250, HONDA REBEL(-1999), HONDA JADE, HONDA JADE, HONDA XR200, HONDA XLX250, HONDA XL500, HONDA XL400R, HONDA XL250, HONDA XL250, HONDA XL125, HONDA VFR750R, HONDA VFR400R, HONDA VFR400R, HONDA VFR400R, HONDA VF750F, HONDA VF750F, HONDA VF750F, HONDA VF400, HONDA TLR200
I'm doing my job reasonably well.
Product as expected. Easy to work with and I replace it regularly. View detail
Exhaust System Fixing
It is purchased for fixing Exhaust System.
Quantities with Anti-vibration Rubber Tube:I thought the Set was better, but I am concerned that it seems slightly shorter in length when installed.
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
Cancellation.
I'm sorry, but I'm canceling this item. View detail
Fits: SUZUKI MARAUDER125 (GZ125), SUZUKI BANDIT1250S, SUZUKI BANDIT1250F, SUZUKI BANDIT1250, SUZUKI BANDIT1200, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman
Used at Motorcycle shop
Purchased when purchasing Exhaust System from Wills WIN
I gave it to a motorcycle shop to use.
View detail
Fits: HONDA DJ-1-RR, HONDA G', HONDA CABINA 50, HONDA CROSS CUB 50, HONDA JULIO, HONDA JOKER Helmet 50, HONDA Giorno, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 Standard, HONDA SUPER CUB 50 DELUXE, HONDA SUPER CUB 50 Super custom, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA SUPER DIO, HONDA SUPER DIO -SR, HONDA SUPER DIO -ZX, HONDA TACT, HONDA TACTSTAND-UP, HONDA TACT
There's no copper on it.
In the picture Aluminum and Copper Quantity:It looks like a Set, but it's a two-disc set of Aluminum only. View detail