Reviews
Care must be taken when assembling.
It seems to be incompatible with the Inner panel during installation.
I would like to process and correct.
It's cheap, so I guess it can't be helped.
View detail
Things are good.
First, the quality and texture were very good.
I was concerned because I was told it was an imported product, but there were no strange rattles or uneven coloring, and I think the surface treatment is beautiful.
but it does not go on as it is.
The first thing to do when taking it out of the box is to measure the Clamp section.
This is something I always do when I purchase external parts from Netetc. before I start the installation process.
We don't want to be in trouble in case there is a Size mistake.
In the NINJA2 Helmet 50R and 400, the OEM handlebar is placed on the top bridge, and the front fork is protruded by about 20mm.
I am sure the Owner will understand this.
In contrast, the height of the Clamp section of this product is approximately 30mm.
You get the idea.
The front fork protrudes about 20mm in OEM condition, while the Clamp portion of the product is about 30mm.
If you want to install it, you will have to increase the protrusion by 10mm.
Unless you have changed the rear suspension or lowered the ride height of the rear with Lowdown Link etc., it will have a large effect on handling if the front fork sticks out 10mm, and in some cases, it will be very dangerous if the fork sticks out too far. (I know it depends on the individual's perception.) 。
Since I have no plans to lower the ride height, I decided to ask for a return since I have not installed them, even though I took them out of the box.
View detail
Easy install, great protection, great quality
Installation on motorcycle frame is easy. Does not require removal of engine mount bolt. The slider mounts using a small hole underneath the main engine bolt. All bolts provided. Tested it by falling my bike over on the left side. Handlebars and footpegs do not touch the ground. Great purchase for the price! Item quality is great. View detail
comfortable to hold
Good shape and high cost performance! View detail
OEMCowl not available
Can't use it in the last semester tep, maybe I can use racing cowl... View detail
It works!
The clutch lever is a little lighter and the feel of operation is smoother. Incidentally, the short handlebar john of 13 cm is used in the image. View detail
The detail construction is not good enough.
The end of the visor is not bent enough so that it interferes with the cowl corner, and the hole is not cut enough so that the visor does not fit inside the meter visor and it floats! It is a bit of a problem.
The transparency of the Level is good, with little distortion even when the Level is face down, which is not bothersome.
For this Gold amount, I think the texture is well made.
View detail
Need to drill a hole
Handlebar position is lowered to Large width, so there may be interference with Cowl, a little adjustment is needed at the time of installation.
Operability has been improved by a LARGE margin and is recommended for motorcycles equipped with Rear Sets.
View detail