Reviews
Effective
I use thin Gloves as I use the Handlebar Cover and Grip heater in winter on my PCX125 for commuting and I use thin Gloves.
Then the Brake lever is cold, so I installed this Sponge.
The effect is Large, but I take it off in the early spring because it will be cut off from the edge.
I wish it was a little more durable and 2Season usable or cheaper.
View detail
I think it's good for Parenthesis.
Installation is also very easy, just plug it in.
There is a bit of an Impact around the Grip and it looks good.
I will only use one because it's a LITTLE CUB, but I'll keep the other one in reserve.
View detail
I ruined one of them, but I still want to put it on without giving up.
This is a universal product, so it's not always the same, but it's a good idea to pass it through the diameter of the lebar end. The hole was too small to fit it well. The Clutch Side was installed with better slippage, but the Brake Side was installed while I avoided it.
I couldn't give up, so I bought another one and put it on. When I borrowed a compressor and installed it while wiping the air, it was possible to install it without difficulty. Because there is no Air compressor in the home, I will think about it. However, when the hole is made Large, it is said that it is one advantage and one dislocation after the installation. I think.
Personally, I can't feel the coldness of Lever in the winter and BrakeTouch is anti Linear (lol) is literally a good Cushion for me, as I'm not a good driver. It has become. Even though it's an inexpensive product, I lowered my rating a bit because it was difficult to install, but I'm sure it will continue to be ruined and I think I'm going to buy more and repeat the process.
View detail
I used WasteGold
It does not fit in Lever due to lack of elasticity
Even if you make it slippery with the Parts cleaner, it will tear at the dumpling at the end of the lever
It went to the Garbage box within 2 minutes of opening it
View detail
The coldness of Lever becomes hard to be transmitted
Winter Spec. Mounting to make it.
By attaching it, the coldness of Lever became less overwhelmingly transmitted.
To say greedy, I thought that Lever touch would be difficult to change by making Sponge a bit more waisty.
View detail
About attachment, since it is somewhat tight, pains are taken to thrust, but a wearing feeling can be used satisfactorily. It is dramatically useful for the purpose of preventing a Lever sliding especially on a rainy day, and a feeling of operation
About attachment, since it is somewhat tight, pains are taken to thrust, but a wearing feeling can be used satisfactorily.
It is dramatically useful for the purpose of preventing a Lever sliding especially on a rainy day, and a feeling of operation becomes good.
A price also thinks again that it is a cheap Items with a sufficient Cost performance.
View detail
The way to which this product was attached individually thinks that it is easy to carry out operation of a Lever. Since it could be satisfactorily used still now although there was also time, such as rainy weather and open storage, for the about fiv
The way to which this product was attached individually thinks that it is easy to carry out operation of a Lever.
Since it could be satisfactorily used still now although there was also time, such as rainy weather and open storage, for the
about five years, but degradation had been seen a little [
], it purchased newly.
Isn't durability also rather good, considering the
Cost?
I think whether to be easy to equip with
attachment, if a Silicon grease is applied lightly.
View detail
Lever sponge which has been indebted whenever this season comes every year! although it will be clutch operation and the fingertip will get cold, if midwinter comes even if it has attached the Grip heater -- -- even if this pro
Lever sponge which has been
indebted whenever this season comes every year! although it will be clutch operation and the
fingertip will get cold, if
midwinter comes even if it has attached the
Grip heater --
-- even if this product has grasped the cold Lever --
-- it is OK.
enjoyment of a Motorcycle life is done by free [ from cold ] one by a
Grip-heater + Lever sponge
this year also!!
View detail
It attached to V-Strom and a DF125 DJEBEL in December, 2011. Since the Lever did not get cold, pain decreased to also carry out a Touring. I think that an effect increases by using the Items of such windscreens together since a Handle cover is attac
It attached to V-Strom and a DF125 DJEBEL in December, 2011.
Since the
Lever did not get cold, pain decreased to also carry out a Touring.
I think that an effect increases by using the Items of such windscreens together since a Handle cover is attached as for the
DJEBEL and the Bush guard is attached, respectively as for V strike.
a rent will go into the Clutch side of V strike in
, however March, 12 when the year began -- perfect -- use -- impossible .
The Brake side has also split in May.
Is the direction of the
DJEBEL because it is changing to the Short lever of DRC? For the moment [ ? ], a rent is not on right and left in since the frequency where it rides is low.
It compares and possibly did not suit the Lever of thick V strike.
It remains as it is, and incidentally V strike hangs a Cover and they are [ two ジェベs are located in a line on good terms, and ] unauthorized parking.
Seemingly, that will not be right although the direction of V strike which ultraviolet rays do not hit easily is likely to last long environmentally.
View detail
Cygnus X-SR for commuting (SE12J) was equipped. A winter season and metal levers are cold. The coldness of a lever can be eased if this lever sponge is used. Although the touch of a lever is not bad, also well, there is particularly. [ no ]
Cygnus X-SR for commuting (SE12J) was equipped.
A winter season and metal levers are cold.
The coldness of a lever can be eased if this lever sponge is used.
Although the touch of a lever is not bad, also well, there is particularly. [ no ]
It can do for fun in case of a slender lever.
In that case, it becomes easy to operate the taped direction.
Although I consider [ that it can respond to a lever authentic positive in each company, and ], wearing (insertion) may be difficulty at a lever and the lever of a large-size car with a larger ball of a part.
Although it is sponge with pliability, it will split, if it is strained since it is sponge after all.
It adds that it was not able to reduce, although the thicker heat shrinkable tube for coldness mitigation was incidentally used.
View detail