Reviews
Fits: HONDA Forza(MF10), HONDA Forza(MF10), HONDA glom, KAWASAKI ZX-9R, KAWASAKI ZX-RBF, KAWASAKI ZX-RAFA, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI ZX-14R, KAWASAKI Z125 Pro, YAMAHA YZF-R25, YAMAHA YZF-R3, KAWASAKI W650, HONDA NC700X, HONDA NC700S, YAMAHA MT-25, YAMAHA MT-03 (2015-), HONDA CRF1000L Africa Twin, HONDA CBR400R (2013-), HONDA CBR250RR(2017-)
Affordable and easy to use
[How is it used?
Wiring was needed for Circuit Running.
Was the installation difficult?
Copper Washer is included, so there is no need to buy it separately for the first time.
Of course, without the WiringPlate, wiring is not possible, so please purchase and install it separately.
6R is Oil Pan Bolt with Plate bite.
I was reluctant to remove the oil pan bolt, but so far there has been no oil seepage, so I can use it without any problem.
How was your experience with it?
Designability is not particular, but I have no problem with the functionality.
Affordable and easy to use.
[Included Parts:were they on?
Copper Washer and Wire included.
It is a one-time fee and must be purchased the next time it is used.
Point and hang of installation
Wiring should be done by applying tension in the direction that the bolt is tightened. Sometimes we see wiring that is not only meaningless but also dangerous.
View detail
Fits: HUSQVARNA SVARTPILEN 401, HUSQVARNA VITPILEN 401, HUSQVARNA SVARTPILEN 200, HUSQVARNA SVARTPILEN 125, HUSQVARNA SVARTPILEN 250
The best choice for waterproof bag storage
It was useful during long distance tours.
Since the rear seat of the Svartpilen is short and narrow, this carrier can stably hold a waterproof bag of about 40 liters.
The design is simple, so it doesn't look too distracting.
Both 1st and 2nd generation fillens can be used. -------------------------------------------------- -------- It was useful during long distance tours. Since the rear seat of the Svartpilen is short and narrow, this carrier can stably hold a waterproof bag of about 40 liters. The design is simple, so it doesn't look too distracting. Both 1st and 2nd generation fillens can be used. Powered by Google Translator
View detail
Fits: HONDA REBEL500, HONDA REBEL250SEdition, HONDA REBEL250
KIJIMAFrontReachSeat
I used to ride with a GelCushion, but it used to be a hassle with gapping, etc. The Cushion is no longer necessary, and the seating has become more comfortable.
Regarding the installation, there is too much play in the claws that insert into the body, so some modification is necessary, such as covering the claws with rubber material. I would like you to improve this part.
View detail
tw200
The appearance has been improved by the Large change,
The instruction manual was easy to understand and I had no trouble installing it.
View detail
a perfect fit for a bike
very precise and sparkly It's easy to wear It would be nice if the prescribed torque value for the fastening bolt was written. The combination with "overracing subframe" is good My bike has become a little more shiny. View detail
Insistence is strong
The bar is quite high and has a strong presence.
The color and texture are nice.
View detail
Fits: HONDA GB350, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side
Less expensive than OEM
It is less expensive than OEM. Performance is probably comparable to OEM. View detail
Required for OH above the waist
Used for Valve matching. This is a task that is rarely done, so I am thankful for this Size. (Even this Size will probably never run out.) View detail
Fits: KAWASAKI Z400LTD, KAWASAKI NINJA600R C1-10, KAWASAKI Z750GP, KAWASAKI Z1000R, KAWASAKI EN400, KAWASAKI 1000GTR, KAWASAKI Eliminator 400, KAWASAKI ZEPHYR550, KAWASAKI ZEPHYR750, KAWASAKI Z400 Custom G3 (83), KAWASAKI ZL1000 A1(87), KAWASAKI VOYAGERV II X II B 86-99, KAWASAKI VOYAGERV II X II A 86-99, KAWASAKI VOYAGERV II B 86-99, KAWASAKI VOYAGERV II A 86-99, KAWASAKI ZEPHYR750 RS, KAWASAKI ZZR1200, KAWASAKI ELIMINATOR 750, KAWASAKI ELIMINATOR 900, KAWASAKI ZEPHYR1100 RS
I have no particular problem using it.
It is a consumable item that is used for a short period of time, so it is very helpful to be able to purchase it at a reasonable price. I have no problem using it. View detail
GOOD GOOD Glass Wool Acoustafil
Cutting is accurate and no cutetc. is required.
The Glass fibers are braided and compressed thinly, so there is virtually no scuffing of the Glass fibers.
(but protective equipment is still required)
The compressed Seat is temporarily fixed with Tape and expands with heat after assembly.
The work of putting it in the tube is easy.
The purchase cost is usually a problem instead of the difficulty of the work being reduced compared to Glass Wool.
Silencer parts removal & disassembly, Rivet removal by Drill,
Rivet re-fixing, hole alignment, and removal of remaining gasketetc. using special tools,
Parts matching checks and other su-kills are necessary.
One 1100mm-long Seat is equivalent to one Silencer.
Two Silencers would require two pairs.
View detail
Repair of external Exhaust System.
The Band of Earls Gear's Slip-on Silencer that I bought used is not usable because the Screw does not turn in RustRust.
I checked and it was the same as this product.
The band itself is stainless steel, and the screws are iron, so Copa Coat is applied to the screw threads to prevent biting and rust.
It can be tightened normally and looks normal. No exhaust leaks, probably because it is evenly tightened.
I thought it was a good, safe product.
View detail
Good
If you read the manual, it is easy to install and fits well. It weighs more than you think. The cooling fins have a nice shape. View detail
Easy to use
It is a common Horizontal Type carrying can.
It combines all of the above:ease of use, ease of carrying, and ease of handling.
It is 10L, so the volume is not large, but that makes it light and easy to handle.
Recommended for those who do not have a carrying can or are purchasing a carrying can for the first time.
View detail
It can also be used on the lower road!
I bought it on impulse, thinking that it would be good if I could use it mainly on downhill roads. Surprisingly, my right hand became very comfortable. I have heard some people say that they can't use it because it slides too much, since the grip varies depending on the large size and texture. In my case, it was just right. So, if you feel it is going down, you can easily put it back up. It almost never comes down, though. This is a great buy! I wish I had tried it sooner! View detail
Reliable Engine Guard
I bought this because I was worried that the side pipe on my NC750X alone would interfere with the side pipe when it tipped over. I was told that it would interfere with the side pipe and that it was Large sturdy, but it did interfere with the side pipe. I had to cut it with a sander and paint the cut surface matte, but I was satisfied with the finished product.
Sparks and noise are great when cutting, so be careful if you try it.
View detail
inconspicuous
I was a bit surprised at the price for such a bracket, but considering the time and effort required to find a substitute and the fit, it may be inexpensive.
The method of installation is up to you.
View detail
Fits: HARLEY-DAVIDSON FXLRS SOFTAIL LOW RIDER S, HARLEY-DAVIDSON FXLRST SOFTAIL LOW RIDER ST, HARLEY-DAVIDSON FXRST SOFTAIL LOW RIDER EL DIABLO
Pull back easily
It is just right to be able to pull back easily without changing wiring.
If this isn't enough, you could replace the Riser and raise it.
It's cheap and helpful.
View detail
Easy dress-up
[How is it used?
I wanted to change the look of the SUPER CUB110 (JA59) a bit, and also to have an anti-agitation effect.
Was the one you received as per Image?
Nothing of particular concern.
Was the installation difficult?
You will need a #3 Driver and a 10mm Wrench, nothing too difficult as you just need to remove the License Plate and install them together.
How was your experience with it?
It looks a bit Wilde. I'm not sure how effective it is in preventing agitation (partly because I didn't get something so blatant to begin with). Well, it makes it look more like an Off-road Motorcycle, which is better than nothing.
[Included Parts:were they on?
Nothing in particular, just Body.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Since the material is Rubber, I don't think I need to worry about it, but I thought it might hit the Fender that comes with the Motorcycle from the beginning, so I put Urethane Seat on it (2nd photo).
View detail
Fits: INDIAN MOTORCYCLE SCOUT SIXTY, INDIAN MOTORCYCLE SCOUT
dirty
I thought it was Garbage, which is too dirty both in Package and inside.
It was a pain in the ass to return it, so I polished it myself for about an hour.
To the extent that it can be put on, I made it Beauty.
If it's this dirty, I'd rather buy it used and cheap.
View detail
Fits: YAMAHA BirdCity, YAMAHA Tricity155, YAMAHA BirdCity, YAMAHA Tricity155
It didn't fit.
I bought it because WeBig says it fits New Model from 2023,
Could not install.
I checked KIJIMA's Homepage and it was 2023 - not compliant,
View detail