Reviews
Incompatible with Fender Eliminator Kit
I bought this because I want to install a Saddle Bag.
If you install it, you can't use Helmet holder, but it's not used much. (Difficult to use) So there was no problem there.
However, it is not compatible with the Fender Eliminator Kit that I originally installed. It's not a problem at Level, but it's bothering me.
View detail
Fits: HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CRF250L
It needs to be processed!
The Guard itself is nice and sturdy, but the Bracket doesn't match the Bolt position at all!
I managed to forcibly bend and install it, but it was a pity because I was relieved that it was made by KIJIMA.
I want you to make sure you improve it!
View detail
Fits: HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CRF250L
Pimping? Bracket needs to be bent a bit.
The Bracket on the Shroud side interferes with the Radiator, so it won't stay on.
You need to fit it once and make sure it matches the Bolt hole with Pliersetc.
At first I wondered if I could really wear it.
There is a video on YouTube of someone installing it, and I think it will work if you refer to it.
View detail
Fits: HONDA DREAM50, YAMAHA TW200, YAMAHA TW225E, YAMAHA SR400, YAMAHA SR500
Well, it varies.
I had it on Ska tune, so I made it Battery reply.
I don't use Battery, is it Large sturdy? I used to think so.
It looks good, but there are many harmful effects.
good point
Lighter weight because there is no battery.
You don't have to maintain it.
A bad point
Lights seem to go out while idling. It improves when it runs.
The stop-lamp stays on.
Blinker's blinking speed is too fast.
Fuse is ruining fast.
In the end, there is no substitute for Battery, there is no good story.
I put it right back on Battery (lol).
View detail
Fits: YAMAHA CYGNUS Gryphus, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X-SR, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SBasic, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, YAMAHA TMAX500, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA Axis Treat, YAMAHA N-MAX, YAMAHA N-MAX, YAMAHA MAXAM, YAMAHA MAJESTY250, YAMAHA JOG125, YAMAHA GRAND MAJESTY250, YAMAHA GRAND MAJESTY400, YAMAHA
Maybe it's just a coincidence?
I bought this because I wanted an easy to remove Grip heater.
I was disappointed to find that the crimp on the Bullet Terminal was loose. I thought about returning it, but I could fix it myself so I didn't. I thought about returning it, but I could fix it by myself, so I fixed it and used it instead of returning it.
The Heater temperature is much lower than I expected, but I think it will be effective if I use it with Handlebar Cover.
The Grip is wrapped with a string, so it rotates and gaps little by little while running.
The good thing is that they are easy to remove and inexpensive.
I don't know if I can recommend it much for those who ride frequently in the winter.
View detail
สินค้าไม่สมกับของญี่ปุ่นเลยเลยงานขัดไม่ละเอียดหยาบมาก และหัวที่งัดก็เล็กและหนาองศางอก็น้อยสินค้าไม่สมกับของญี่ปุ่นเลยเลยงานขัดไม่ละเอียดหยาบมาก และหัวที่งัดก็เล็กและหนาองศางอก็น้อย View detail
Gap.
It is certainly easy to do AxelOpening without gripping the Grip so tightly, but it will gradually become a gap. View detail
A bit of a shame
The strength and the stability of the installation place are not felt well. As for the feeling of use, because the Inner cover is raised in the Center, Helmet hits easily and is worried about the scratch, it has become Convenient Hook now. View detail
The installation is very Large strange.
In the first place, MAJESTYS is not designed to put Fender Eliminator. There are too many parts which have to be removed in order to remove the tail area. It's very Large strange. And. I'm going to cut the OEM Fender off with the thread saw. I was surprised to read that. It's a bit of a stretch to design.
View detail
Fits: HONDA Rebel 250, HONDA Rebel 500, HONDA REBEL250 ABS, HONDA Rebel300
It's a work in progress
REBEL250 SEdition, but we currently have a Cowl installed around the Light! But I wonder if this Fairing kit can be installed without removing it? View detail
Only looks
The moving parts are too loose to tighten, so it's completely useless when running at high speeds because of wind pressure and vibration
Quantity:2pc. I bought a set and they are both, so it doesn't seem to be an individual difference Because the mirror part is plastic and light? The paint also peels off in one shot when you use tools, and it's rusting from there
View detail
Looks good,but very weak
I bought this engine guard for it's low price, however it is too soft at the connection part, this may protect your bike only if it is still and it will bend. View detail
It's better than nothing
I've been struggling with sand and rain bouncing up and down since I got the Fender Eliminator
I found this product and bought it to try it on
Active's Fender, not KIJIMA's Fender Eliminator It's a Eliminator, so can I install it? But I managed to get it on
Because it was a retrofit Reflector, it is wobbly because of the Frame strength
In addition, you can install the License Plate Holder and use the Double-sided I used tape to secure it in place
Is the bounce-up a little less than it was before you installed it? That's about it
I think it's a bit expensive in terms of Cost
View detail
If it's cheap
Unfortunately, it was covered in Small scratches
I'd love to see a new Well nut for installation
I think it's wise to be prepared
Looks good parenthesis and Handling
It's much lighter and has less air resistance
Fuel economy has also improved
View detail
![Front Fork Boots]](https://img.webike-cdn.net/catalogue/13606/hd03220_TS.jpg)
Fits: HARLEY-DAVIDSON SPORTSTER Family, HARLEY-DAVIDSON DYNA Family, HARLEY-DAVIDSON DYNA Family
Final action and finally a fatality
We had a lot of trouble, but I'm happy to report that we were able to verify the effectiveness of the test in six months
For the symptoms of cracking packaged goods, please use the special adhesive for Rubber (Slightly more expensive, Blackish Material's Rubbery Glue) In addition to this adhesive, TubePuncture repair patch adhesive is also effective I think (Be careful not to adhere to the inner tube when installing the adhesive.)
Still, in my case, every time I Pitching, it opens up a little bit, even after it's fully glued, so Finally, BlackCoating's wire was used to prevent the valley of the bellows from cracking Fixed
No cracks have occurred after the glue + wire fixing treatment
BlackWire is also easy to find at home center or, if you look for it well, at the hundred-yen store
the hang is not too tight, not too loose, but not too loose so that it contracts to Smooth when the Boots is in operation Fixed
Tie Wrap fixation is also possible, but the vent holes in the Boots will allow the Tie If the wrapping is blocked up, it can cause a rupture, and the mountain part of the bellows can break off There is
The wire is thin, so it doesn't block the vent hole, and it also keeps the airflow in place and can be fixed with Recommendation
Now it's no longer a concern and the Wire has solved the problem without being noticeable
The boots themselves seem to have quite a bit of durability, and I think they can go on like this for the time being, Front If you don't want to remove the fork, you can use this Boots, but if you can work with it, you can also use this Boots, if you can remove it OEM or OEM Shape equivalent is appropriate
View detail
A classic trap
I wasn't going to write an imprint, but it was terrible, so I'll still write it
The angle adjustment part on the MirrorBody side is loose, and no matter how much Screw on the Bracket side I tried to fix it in place but the fine-tuning part moves on its own, so it's impossible to use it while driving because it's visible in the Gap
When you ask the manufacturer to replace it, there is no abnormality (= this is the Spec.), so you can replace it with a new one He said he wouldn't do it
If you're unlucky enough to get a loose one, you'll end up throwing your gold down the drain like I did (And one of the two bottles I bought was not loose)
And by the way, the quality of the paint job is nothing to write home about
I can't believe that the price is twice the price of Napole On's AZ Mirror or any other product that's so great! Quality
The quality and paint is much better over there I'm not trying to yell at Napole On This one is just too bad
This is a product that looks like the Manufacturer's Delicacy A standard item? This?
View detail
A little more volume and sound quality
I bought it because I thought it was almost the same as the OEM Product When I installed it, it's almost good
However, the volume and sound quality are somehow lacking
The OEM Product has a more solid tone and volume
I feel like I'm missing something
So I give it this rating
View detail
Too much accuracy
I've never had this happen with any Parts I've bought, but all the Mounting Bolt No matter how I try No matter how I try.1,Quantity:2pc. I used it without the Set on, but I took it off immediately I will never buy this Manufacturer's Parts again View detail
It doesn't work as a filter
This will not make the Garbage disappear from the Float chamber, even if you use it In Gold netting, fine Garbage will pass through It didn't make any difference whether it was there or not View detail
be disappointed
When I checked the product, I found out that when I put the product in the DisplayCase? I have temporarily fixed the Mirror to the Pole, but I have to use the following techniques to secure the Mirror Quantity:The SetScrew marks were firmly attached to the Pole
If the Pole is attached to the Motorcycle and there are marks in an inconspicuous direction, it helps was also there, but it was firmly attached to the direction of prominence (top side)
In case you're wondering, Quantity:Pair (for Left and Right) I bought two bottles of the minute and they were both in the same condition Disappointing
View detail