Reviews
You look good.
[How is it used?
XR230 Used for Valve Matching
Was the one you received as per Image?
Image
How was your experience with it?
We have completed the Valve matching process without any problems.
[Points to note]
It is a small package, but there is so much in it that you can't use it all.
No problem!
View detail
Spring in one shot.
I purchased this product for use in Silencer replacement.
Before I bought this product, I had to struggle with pliers and my fingers to finally install it, but I was able to install it in one shot.
It is a part that I am tempted to be stingy with because I don't use it often, but I think there is no harm in buying it because it makes things much easier.
View detail
Challenge to Valve Matching
I bought this to Challenge for my first Valve Matching. I think it is good to try everything, but I personally thought that this area should be left to PRO. Also, I think it is not a good way to do it, but the Suction Cup is easy to come off from Valve. I think it is a good cosmetic product because it comes with two types of Compound. View detail
Shoo, Pushing, Shoo, Snap
Used for new Valve replacement work on CUB.
I had to replace my previous tacho bar because the Rubber had been ruined.
The feel of the product is the same as the previous one.
The tacho did not come off and could be worked normally.
It's not a task I do very often, but I appreciate being able to purchase it because I can't move forward without it.
It also comes with Compound, which is helpful.
I hope that the Red Lead used for marking will also be available in the size of the Compound included with this product.
View detail
No spare Suction Cup
As pointed out in other reviews, LargeSmallQuantity on the Right Side of the photo:There is no spare Suction Cup for 5pcs. each. Suction Cup at both ends with stick (LargeSmall1 each) and Medium Eyes, and Quantity of Fine Compound:Set. I have no problem with this because I was convinced to buy it.
I used it to match the new Valve on my VIRAGO250, the Large one is for the Intake Valve and the Small one is for the Exhaust Valve.:Set was really helpful.
Well, this kind ofQuantity:I think those who buy Set do not need a lot of spare parts.
View detail
Required for Exhaust System installation
It's a good tool to have. View detail
I use it for Spring Remove in Exhaust System.
I use this product for Spring Remove on my Exhaust System and find it easier and more convenient to remove than radio pliers. View detail
I used it for Spring Tensile on Center Stand!
I purchased this to pull and install the OptionOEMCenter Stand Spring on my vehicle.
It is one of the products that it is convenient when there is it though the appearance is few.
View detail
It is useful for spring removal of exhaust systems.
The Grip is easy to grip and is designed for ease of use, which makes the installation and removal of the exhaust spring much easier and less likely to cause damage to the exhaust pipe. View detail
Because I felt annoying with the radiopen
I bought it because I needed several scenes so far.
Radio pliers will do something, but this one is definitely easier to do.
It is Small compared with other Spring hooks, so I chose KIJIMA's thing.
I also do not take the place of the tool box, so I'd recommend it.
View detail
It is convenient to have!
It seems like a lie that I worked hard at Radio pliers.
I had skipped Spring and hurt my surroundings, but as expected it is a special tool, it's fun. Because it is cheap, it is convenient to have it!
View detail
Easy to use
Engine It is essential for OH on waist. It's a bit familiar to me, but it's not that difficult. Cheap and Quantity : With 2pc - Compound also Quantity : 2pc. Recommendation with Set. View detail
Overhaul time
I bought it for rubbing Valve with Overhaul of Head.
It was wood and it was very light and easy to turn. There is a sense of sense as Compound is also set.
View detail
It will be a useful tool, if it is cheap and is by simple structure. -- it eats into a hand and painful, since it pulls and removes with wire when always removing a Spring -- although considered and carried out, when it was, it was -- it comes out and is
It will be a useful tool, if it is cheap and is by simple structure. -- it eats into a hand and painful, since it pulls and removes with wire when always removing a Spring -- although considered and carried out, when it was, it was -- it comes out and is a convenient tool. View detail
This product is used at the time of adjustment of the Valve of the Engine for my Races, and is APE 100 cc. Since the Valve was adsorbed firmly very in a user friendly manner and two kinds of Compounds were also attached, it came to be able to do adj
This product is used at the time of adjustment of the Valve of the Engine for my Races, and is APE 100 cc.
Since the Valve was adsorbed firmly very in a user friendly manner and two kinds of Compounds were also attached, it came to be able to do adjustment simply.
In addition to this, the Motorcycle of the Motocross adjusted the Valve each other using this product, and the Motorcycle here was also dramatically made into the Smooth.
I think that one piece may have the direction by which engine maintenance is carried out!
View detail
4-2 is used for the size of a blind rivet. When maintaining a replace silencer, it decomposes, and it is an indispensable tool when assembling. Or it is an indispensable tool also when making a silencer emblem. On the frame of the lower part o
4-2 is used for the size of a blind rivet.
When maintaining a replace silencer, it decomposes, and it is an indispensable tool when assembling.
Or it is an indispensable tool also when making a silencer emblem.
On the frame of the lower part of the top bridge of W650 and W400, the abbreviation phi3.5mm hole is open beforehand.
They are two abbreviation phi3.5mm about 80 mm-pitch holes to right-hand side.
They are two abbreviation phi3.5mm about 80 mm-pitch holes to left-hand side.
TSU in which rivet conclusion is made there as for the kawasaki pure emblem of a picture!! In this part,
I can think only the hole for attaching a kawasaki pure emblem!! It is a hole of such four right and left!! Since this kawasaki pure emblem is stuck on many of ZRX1200 or reimport vehicles, it is not novel parts.
.
.
If it is stuck on W650, it can acquire a fresh impression!! Incidentally the part number of these kawasaki brand-name parts is #56038-1054.
(A blind rivet can be obtained also for DIY Schopp or a kawasaki original manufacturer's product.) When carrying out plug exchange of W650, how is such customization in passing? It does not take the attachment time of an emblem with 2 minutes by an emblem on either side.
.
.
We are the products most found useful in kijima products.
This hand riveter ? is a good tool though cheap.
The above was introduction of the first team tool which we own.
(^O^)v
View detail
It purchased in order to equip with the spring (size, doubleness configuration of smallness) of a center stand. I think that aside from small Ho the tension of the large spring was not odd and it was not able to substitute a driver etc. for it. Al
It purchased in order to equip with the spring (size, doubleness configuration of smallness) of a center stand.
I think that aside from small Ho the tension of the large spring was not odd and it was not able to substitute a driver etc. for it.
Also in order to avoid an unexpected injury, he buys it and it is a disadvantage specialized tool which is not.
View detail
It is an existence which must be in the glass wool exchange in the silencer of a muffler. Since a price is also cheap, the product made from KIJIMA is recommendation.
It is an existence which must be in the glass wool exchange in the silencer of a muffler.
Since a price is also cheap, the product made from KIJIMA is recommendation.
View detail