Reviews
You look good.
[How is it used?
XR230 Used for Valve Matching
Was the one you received as per Image?
Image
How was your experience with it?
We have completed the Valve matching process without any problems.
[Points to note]
It is a small package, but there is so much in it that you can't use it all.
No problem!
View detail
It backfired a little, but I was able to lubricate it successfully.
Lubricated when replacing Clutch Wire. Used Bell HammerSpray. View detail
Spring in one shot.
I purchased this product for use in Silencer replacement.
Before I bought this product, I had to struggle with pliers and my fingers to finally install it, but I was able to install it in one shot.
It is a part that I am tempted to be stingy with because I don't use it often, but I think there is no harm in buying it because it makes things much easier.
View detail
Challenge to Valve Matching
I bought this to Challenge for my first Valve Matching. I think it is good to try everything, but I personally thought that this area should be left to PRO. Also, I think it is not a good way to do it, but the Suction Cup is easy to come off from Valve. I think it is a good cosmetic product because it comes with two types of Compound. View detail
Chain cut easily and conveniently
[How is it used?
Purchased to Cut the Chain purchased with the Restore of the LITTLE CUB that was given to us.
I used to cut the joints of the Piece with an electric sander etc., but by using this product, I can easily chain cut in a short time, which is very convenient.
Was the one you received as per Image?
This product, which is used by our friends and our shop, is reasonably priced and easier to obtain than other products, and can be used for most chains, as it is available in 420, 428, 520, and 525 sizes.
Was the installation difficult?
It may be a little confusing when you are not used to it, but if you read the Instruction Manual carefully before working on it, you will be able to cut it really easily.
It is a safe place to keep in the toolbox of those who like to Restore and those who need Setting, including back and forth Sprocket.
How was your experience with it?
If you read the Instruction Manual carefully before use, the process will be easy.
[Included Parts:were they on?
All the items are shown in the attached picture. I don't know the name of each Parts, so please refer to the picture.
[Was there anything that disappointed you?
I have only used the product a few times, but I have no disappointment or dissatisfaction with the product as expected.
Other items that would be helpful
Point and hang of installation
On the bottom of the Instruction Manual. Cutting the bolt with a cut bolt will damage the tip of the bolt. Use a sander or similar tool to scrape off the crimp. Also, be sure to position the pin so that the tip of the pin is in the center of the crimp. It is stated that
To be honest, even if you use this product out of the blue, you can cut a 420 or 428 size without any problem, but if you want to use the tool for a long time, you should use it according to the Instruction Manual.
If you are still not confident, do not hesitate to ask for a PRO.
[Notes]
With this product. "Disking operations." It is only a tool to Cut Chain.
Please make sure to confirm the number of pieces to be cut in advance to ensure that there are no mistakes.
If you make a mistake and cut too many pieces, the chain will be too short to use.
Also, do not reuse a chain that has been stretched by overuse until it is cut, because the spacing between the pieces has also been stretched, which may lead to wear and tear on the sprocket and damage to the chain even if its strength is within the manufacturer's recommended engine displacement volume. The spacing between the pieces has been elongated, which may cause the Sprocket to wear differently.
[ITEMS TO BUY TOGETHER
A new Chain, each Chemical product needed for its maintenance, and Dustcloth are also useful.
[Opinions and requests to Manufacturer
Please continue to sell this product as long as possible, as it is easy for buyers to afford with Reasonable pricing and a wide range of uses.
View detail
KIJIMA Wire Injector
I have long wanted to buy a cable lubricant, the choice fell on KIJIMA. I liked everything about the material, it is convenient to work with it. Function perfectly performed, good value for money...
I have long wanted to buy a cable lubricant, the choice fell on KIJIMA. I liked everything about the material, it is convenient to work with it. Function perfectly performed, good value for money...
-------------------------------------------------- -------- I have long wanted to purchase a lubricant for cables, the choice fell on Kijima. According to the material, I liked everything, it is convenient to work with it. The function is perfectly performed, good price/quality ratio ... I have Long Wanted to Buy A Cable Lubricant, The Choice Fell on Kijima. I Liked EVERYTHING ABOUT THE MATERIAL, IS Convenent to work with it. Function Perfectly Performed, Good Value for Money ... Powered by Google Translator
View detail
Shoo, Pushing, Shoo, Snap
Used for new Valve replacement work on CUB.
I had to replace my previous tacho bar because the Rubber had been ruined.
The feel of the product is the same as the previous one.
The tacho did not come off and could be worked normally.
It's not a task I do very often, but I appreciate being able to purchase it because I can't move forward without it.
It also comes with Compound, which is helpful.
I hope that the Red Lead used for marking will also be available in the size of the Compound included with this product.
View detail
Items to Buy
Grease does not leak at all and can be properly lubricated all the way to the end.
We recommend that Type vehicles with adjustments in the middle of the Wire lay Dustcloth, as there will be a slight leakage from there.
Note that the type with Dust Boots on the Clutch Side must be removed, otherwise it will only increase the internal pressure and will not come out.
Once the wire is pushed out from the Clutch Side, it is just a matter of stroking the wire by hand and letting it blend in.
View detail
I, beginners, was also able to do it very in a user friendly manner! Since it is also a place to often maintain, grease and this find it useful.
I, beginners, was also able to do it very in a user friendly manner! Since it is also a place to often maintain, grease and this find it useful. View detail
No spare Suction Cup
As pointed out in other reviews, LargeSmallQuantity on the Right Side of the photo:There is no spare Suction Cup for 5pcs. each. Suction Cup at both ends with stick (LargeSmall1 each) and Medium Eyes, and Quantity of Fine Compound:Set. I have no problem with this because I was convinced to buy it.
I used it to match the new Valve on my VIRAGO250, the Large one is for the Intake Valve and the Small one is for the Exhaust Valve.:Set was really helpful.
Well, this kind ofQuantity:I think those who buy Set do not need a lot of spare parts.
View detail
Required for Exhaust System installation
It's a good tool to have. View detail
I use it for Spring Remove in Exhaust System.
I use this product for Spring Remove on my Exhaust System and find it easier and more convenient to remove than radio pliers. View detail
Convenient to have
It is useful to have when replacing Brake Pads.
It makes it easier to put the Caliper piston back in so you can work safely.
This product is safe to use because forcing the Piston back will apply excessive force to it.
View detail
Universality is high
It is mainly used for fixing Flywheel when disassembling the engine.
I do use it occasionally in other places, so it's something to have.
View detail
I used it for Spring Tensile on Center Stand!
I purchased this to pull and install the OptionOEMCenter Stand Spring on my vehicle.
It is one of the products that it is convenient when there is it though the appearance is few.
View detail
It is useful for spring removal of exhaust systems.
The Grip is easy to grip and is designed for ease of use, which makes the installation and removal of the exhaust spring much easier and less likely to cause damage to the exhaust pipe. View detail
Kang Tan!
I bought it to lubricate the Clutch Wire
It's very easy!
Clutch Wire clipped the Thailand coil from Lever and lubricated the lubrication hole Just push the tip of the oil in and pour it in!
It took about 10 minutes to get the job done with no particular splattering!
I think there is a huge difference in efficiency and ease of doing things with and without them
View detail
I bought this one because of the cool colors. That's all.
There are so many similar injectors. I think they're all by the same factory in China. So why buy this one? I bought it simply because of the cool colors. The red silicone or rubber inside looks different from others. That's all. In terms of functionality, they're all the same. View detail
Because I felt annoying with the radiopen
I bought it because I needed several scenes so far.
Radio pliers will do something, but this one is definitely easier to do.
It is Small compared with other Spring hooks, so I chose KIJIMA's thing.
I also do not take the place of the tool box, so I'd recommend it.
View detail
It is convenient to have!
It seems like a lie that I worked hard at Radio pliers.
I had skipped Spring and hurt my surroundings, but as expected it is a special tool, it's fun. Because it is cheap, it is convenient to have it!
View detail