Reviews
On the MVX250F.
I used it to fill the front fork with air. It's good because I can fill low pressure like 0.4 properly. View detail
It is easier to use than I expected.
It is low pressure, so measuring it after putting it in would change it. It is helpful to be able to measure while putting in. View detail
FrontCB400TOverhaul
Used on CRM80 FrontCB400TOverhaul. View detail
Easy to use
Just a Graduated cylinder
Purchased for Fork oil weighing
The construction is adequate, so it will be used for a long time.
View detail
It's definitely easier to have.
The truth is that glass is probably more accurate, but since the liquid level is adjusted at the end, the cheapo Material:It's useful to have it because it allows you to get an accurate picture of the total amount.
Also, although I did not work on it this time, I used various things in the past to adjust viscosity and measure additives for engine oil.
In addition, Fork oil does not like to be contaminated with Dust etc., so it is recommended to use Material:The Plastic lid is a grateful Included Parts:.
I used it from measuring to injection in this fork oil change, this time I noticed that it is easy to inject.
View detail
Cancellation
They're not even in stock, but they're listed in the product section.
Cancel this item only.
View detail
I should have gotten it sooner.
The front suspension of the FX is a semi-air suspension, but as the pressure drops, the ride quality deteriorates.
I used to pressurize it with the for Motorcycle Inflator when it got low, but I struggled every time with overfilling and difficulty in fine tuning.
I bought and used it for the first time in my thirty years of riding.
One word, it's so easy to use and so simple, and honestly, it's too easy to tweak and too detailed to try different things.
The only thing is that the rubber part of the pump and the body are just inserted, so if you get carried away and pressurize too hard, the rubber part will easily come off the pump, and the pump body will wobble and fall, and there is a possibility of damaging the body. I'll post a picture.
View detail
Maybe it's an Ideas product?
It's hard to see in the picture, but I noticed that when I close the Cap lightly, the air bubbles are released and I can use it for various measurements.
It is only a weighing instrument for liquid.
It is not possible to measure or adjust the fork oil level by weighing.
View detail
Graduated cylinder is suitable for fork oil.
There is no danger of the graded cylinder falling over when fork oil is injected, and there is no danger of impurities getting into the fork because it has a cap. View detail
It's better to buy the Size you use …
If you are playing with motorcycle by yourself, you may have it, but you may want to buy a large size Pin when you need it. In my case, it seems that the size I use is the same in the end, so I still have some left over. View detail
Used for a variety of fluids
It can be used to adjust the level of oil in the reservoir for brake fluid and clutch fluid and to remove the fluid from the reservoir. View detail
Stocking it can be useful.
Basically, it's a split pin that cannot be reused by the Manufacturer, so you can stock and quantity:1 Set of 10pcs. is useful for Large, and the quality is exactly the same as OEM. View detail
The size variety is good.
The most commonly used Size is Quantity:It is a small part, but it is often used in very important places. [Contents] I'm happy if it is. View detail
It can be used normally
Purchased for for Front Fork of vmax 1200. I noticed that I used to use this, but I have changed the air pressure more than I thought, regularly checking here, supplementing it will change the taste pretty well.
Even if it is high, it is a little high for that alone...
Well I always invest in the tool in the meaning of unknown in the future, I wonder if that kind of feeling is good
View detail
V-MAX FFork Air pressure adjustment
Buy for V-MAX FFork air pressure adjustment
Easy to use because it is easier to adjust with reduced pressure.
Since the air will push out momentarily when opening Valve
It may be good to add air with it added
View detail
Better than 100 Shops
I got lost as a guy with 100 yen Shop Memory, but Fork oil was very easy to put in at Front forkOverhaul. Memory is easy to understand, it is easy to see! View detail
Is it too hard?
I attached it to the RearASKULShaft fixed of Ninja 250 R, but there is considerable strength to fold back the part that I made Penetrating.
I wonder if Size is wrong.
One sizeSmall I think that it is fine..
By the way, since Head also fits in Nut, it can not be used,
Processing for surplus is too hard and difficult.
250 cc is 2. I guess whether it is 5 centimeters or so.
Since things are solid anyway, there is a sense of security.
View detail
Essential items for Air suspension
I used to put it in a bicycle Inflator until now, but using this Pump simple things can not be helped.
I thought that I should buy it sooner.
Handling is exceptionally high with exact air pressure.
Try once.
View detail
I can go without it, but it is convenient if there is any
Until now I was using Measuring Cup, but I bought it.
I think that there is only Fork oil position as measurement of the amount of oil in the maintenance of the motorcycle, so I think that it is slightly expensive to think only for that.
I think that things are well done.
Although it is not in the photograph, it comes with a removable pedestal and it is properly self-sustaining, and the thing that makes me glad is Cap with effective for invasion of Dust at the time of storage.
Although I do not understand the precision of the scale well, in the case of Fork oil finally the amount of oil level adjustment is finally eliminated, so there was no particular problem.
View detail
It's easy to use, but the price is - - -
Since it can be stabilized even if Oil is put in, it has a sense of security and it is very easy to enter even when put in Fork.
Since Rubber cap is also attached, there is no worry of Garbage and it is safe.
Just Material : I think that the price is a bit too high for Plastic's price.
View detail