Reviews
Essentials for Hose Replacement
Fuel Hose hardens and deteriorates, but so does the Clip:Rust, broken, spreading. It's also cosmetically good! View detail
As an old Motorcycle Spare
Since Fuel Hose and Fuel fliter were purchased, Band was also purchased,
Unifying Manufacturer gives a sense of security.
View detail
I have been using it for a long time because it has a good fit.
I have been using it for a long time because it has a good fit.
I usually use Black, but it seems to be out of stock, so I bought this one.
I am always worried about rust since it is not Stainless Steel.
Material of the same Size from before.:Waiting for Stainless Steel.
View detail
Used in RZ250 Fuel Hose replacement
I also bought Clip to go with KIJIMA's Hose that I purchased.
I matched it to the diameter, but did not use it this time for fear of Gasoline leakage because the Clip was not nearly as effective as the diameter of the Cook's Nipple when it was installed.
The same product is bundled with KIJIMA's Hose that I purchased, but the diameter of the clip is slightly different from this, or maybe the included clip works properly and is usable.
I bought it with peace of mind because of the claim that it could be used with phi;00 Hose, but this time it was a disappointment.
View detail
The Torque is strong and easy to use for the price!
This product is easy to use and has a strong tightening Torque for the price, and it is AllGold, so it is heat resistant, which is a good point! View detail
removal
I bought this one because I thought it was a large size Clip so that I could remove it by hand because the product that used the Fuel Hose fixed Clip used a Type that I had to remove with a tool.
Quantity:1 Set of 10pcs. is not necessary, at least half Quantity:1 Set of 3pcs. and I hope the price is cheap.
View detail
11mm OD won't fit?
I used it on a Fuel Hose with an inner diameter of 6mm× outer diameter of 11mm, but the leak did not stop. View detail
Easy to use, but be careful not to lose it
I used it for Fuel line of TZr50R.
The deciding factor in the purchase
I was looking for a Clip that was easy to remove as I expected to remove the Fuel line a few times for adjustment and cleaning.
I decided to buy it because it was relatively inexpensive and had a good Impression rating.
In addition, since Clip of this Type was used in another part from the time of purchase, I thought it would be able to use it without a problem.
[Impressions of using it]
I thought the part of the handle was Large and certainly easy to pick up.
However, when I was pinching it with Tweezers to test it because the spring force was working in a certain way, it flew away 1pc. somewhere...
When you first put it on, for example, you can spread it out enough with your hands, which is better.
I think that the performance as Clip is reasonably good because there is no leakage especially.
Products compared
I compared this product with KITACO's and DRC's Clip. I bought this product because it was the top in the popularity order and it was inexpensive and had a good reputation.
【Review】
I thought it was good because it was easy to pick up and use. However, it is small and easy to lose.
It would be easier to find if the clip itself was colored....
View detail
You should have a variety of them
I'm using it to replace the Hose in an older vehicle
Clip is often corroded, so it is useful to have it
One drawback is that it takes a HANG to remove it
It's hard to remove with a radipen
View detail
It can be used without problems
It is a very ordinary Hose clip. Since the Knob part is Large grade, install - Removability work is easy. I am using it to install Fuel Hose. View detail
Easy to pinch
Of OEM "of" The square shaped knob of the character required hang to twist with Pliers, but this is lucky. (If Space is a narrow car model, installation may be tough,. ) View detail
Used for CUB90DX
Buy as if you want to make it easier to pinch when exchanging Hose system.
Probably easy to pinch.
I did not need this, but I will treat you as well as it can be taken as a reserve.
Usability is GOOD.
View detail
There is no doubt.
It is an essential item to install Hose. Because Hose is Rubber, it will become thinner over time, but in this case it will be fast enough to tighten it so it is safe. I got lost as to how to choose Size, but it was nicely settled to fit the outer diameter of Hose. View detail
Reliable Hose Band!
I am using this power band because I am worried about Clip attached to Hose. Firmly It closes us so it is very safe. Easy to use than Clip so you can grasp easily with Pliers. View detail
Tightness is good!
Buy to buy Plus a sense of security for Hose Stop.
I think that the feeling of being closed is strength that you can rest assured.
I'd like to position ahead of Hose in a slightly narrow place
Although I had trouble loosing the Clip part by hand
Fit feeling is a good feeling.
I tried to pull Hose lightly by hand,
Well feeling is Large durable because I can not get out quite easily!
View detail
It will be cheap. - - - - - Wax.
Although it is cheap, I ordered the outer diameter Size of Hose with Vernier calipers, but when I installed it, I got clip elongated and it did not become usable. I had anticipated that it would be so structurally - - - I learned a lot. Next time I decided to buy a wide type. View detail
Removing frequency is a lot.
In Maintenance, Tank, Fuel Filter, Carburetoretc. Since the frequency of desorption is high, Hose clip is easy to grab work efficiency is good.
Wire type is frustrating because I can not grasp well with Radio pliers.
With this Type it is easy to grab and can be attached to Smooth. I wish I had had a chic inconspicuous Black.
View detail
Easy to pinch
I am using it for APE, but since I frequently insert and remove Hose with Carburetor setting, I found it by looking for something easy to remove without clip?.
Things were easy to pinch easily and became easy.
But, 1pc. I feel that it is too high 90 yen or more.
I wonder if it will be about 50 yen at least.
View detail
It purchased on the occasion of CR carburetor attachment. He can feel easy about the structure which prevents the leak from the Gasoline hose firmly and which carried out the Firmly. If removal is also inserted with Plierses etc., a Hose can also be e
It purchased on the occasion of CR carburetor attachment.
He can feel easy about the structure which prevents the leak from the
Gasoline hose firmly and which carried out the Firmly.
If removal is also inserted with Plierses etc., a Hose can also be extracted easily.
It is a time-tested product in the
time-tested product.
View detail
It is well attached to Gasoline hoses. If years pass for a long time, and a Clip will also weaken and will be removed, it will not return to origin as it is. Please do not spare but use a new Clip positively. It holds firmly and does not
It is well attached to Gasoline hoses.
If years pass for a long time, and a Clip will also weaken and will be removed, it will not return to origin as it is.
Please do not spare but use a new Clip positively.
It holds firmly and does not speak about a Hose.
View detail