Reviews
On the MVX250F.
I used it to fill the front fork with air. It's good because I can fill low pressure like 0.4 properly. View detail
Easy to use
Just a Graduated cylinder
Purchased for Fork oil weighing
The construction is adequate, so it will be used for a long time.
View detail
It's definitely easier to have.
The truth is that glass is probably more accurate, but since the liquid level is adjusted at the end, the cheapo Material:It's useful to have it because it allows you to get an accurate picture of the total amount.
Also, although I did not work on it this time, I used various things in the past to adjust viscosity and measure additives for engine oil.
In addition, Fork oil does not like to be contaminated with Dust etc., so it is recommended to use Material:The Plastic lid is a grateful Included Parts:.
I used it from measuring to injection in this fork oil change, this time I noticed that it is easy to inject.
View detail
I should have gotten it sooner.
The front suspension of the FX is a semi-air suspension, but as the pressure drops, the ride quality deteriorates.
I used to pressurize it with the for Motorcycle Inflator when it got low, but I struggled every time with overfilling and difficulty in fine tuning.
I bought and used it for the first time in my thirty years of riding.
One word, it's so easy to use and so simple, and honestly, it's too easy to tweak and too detailed to try different things.
The only thing is that the rubber part of the pump and the body are just inserted, so if you get carried away and pressurize too hard, the rubber part will easily come off the pump, and the pump body will wobble and fall, and there is a possibility of damaging the body. I'll post a picture.
View detail
Used for a variety of fluids
It can be used to adjust the level of oil in the reservoir for brake fluid and clutch fluid and to remove the fluid from the reservoir. View detail
Stocking it can be useful.
Basically, it's a split pin that cannot be reused by the Manufacturer, so you can stock and quantity:1 Set of 10pcs. is useful for Large, and the quality is exactly the same as OEM. View detail
It can be used normally
Purchased for for Front Fork of vmax 1200. I noticed that I used to use this, but I have changed the air pressure more than I thought, regularly checking here, supplementing it will change the taste pretty well.
Even if it is high, it is a little high for that alone...
Well I always invest in the tool in the meaning of unknown in the future, I wonder if that kind of feeling is good
View detail
Better than 100 Shops
I got lost as a guy with 100 yen Shop Memory, but Fork oil was very easy to put in at Front forkOverhaul. Memory is easy to understand, it is easy to see! View detail
Is it too hard?
I attached it to the RearASKULShaft fixed of Ninja 250 R, but there is considerable strength to fold back the part that I made Penetrating.
I wonder if Size is wrong.
One sizeSmall I think that it is fine..
By the way, since Head also fits in Nut, it can not be used,
Processing for surplus is too hard and difficult.
250 cc is 2. I guess whether it is 5 centimeters or so.
Since things are solid anyway, there is a sense of security.
View detail
Convenient if there is Stock
Chain Purchase this because it is necessary to replace, but not as many numbers as you need to say.
It is not something to remove often, but it is something to remove occasionally by chain adjustment, so it is more convenient to have Stock.
Because the price is affordable, I personally maintain a lot of people who have maintenance, I wonder if there is any loss.
View detail
It is compact and good.If the point of the Cylinders has the Cylinders capacity which is generous for a while to the one where the capacity of the Tire of its own Motorcycle is larger, it is safe.When it has been in flattened state, if it - Do
It is compact and good.If the point of the
Cylinders has the Cylinders capacity which is generous for a while to the one where the capacity of the Tire of its own Motorcycle is larger, it is safe.When it has been in
flattened state, if it -
Does so after not understanding, unless it can go air also into pinpointing a Puncture place, it will become a problem whether what we do with the place of a usual Cylinders.Since it is a Motorcycle by which a
free is troubled by a loading place, a usual storage place is considered and compactness is needed.
-- although not used yet, it can store in a Compact -- the manner of use used this easy and easy
View detail
I use for adjustment of air suspension. It is recommended quite in user-friendliness.
I use for adjustment of air suspension.
It is recommended quite in user-friendliness.
View detail
It was used for the first front fork OH work. Although there were some goods of about the same price, it is charmed with a lid and purchases. Since it was stabilized since the step was solid, and the lid stuck and mixing of dust etc. was prevented
It was used for the first front fork OH work.
Although there were some goods of about the same price, it is charmed with a lid and purchases.
Since it was stabilized since the step was solid, and the lid stuck and mixing of dust etc. was prevented the inside of use, and after use, it was convenient.
Since the overall length is long so so and it surely remains in a bottom as 1 ml, I think eventually that oil level adjustment is required.
View detail
It was used for the semi air suspension of the front fork of an africa twin. 0.2 kg/cm2 was pressurized this time. The front carried out stripes firmly for a few. Looking at a pressure gauge, a rubber bulb is grasped and pressurized and favori
It was used for the semi air suspension of the front fork of an africa twin.
0.2 kg/cm2 was pressurized this time.
The front carried out stripes firmly for a few.
Looking at a pressure gauge, a rubber bulb is grasped and pressurized and favorite pressure can be pressurized.
View detail
It was used for the oil change of a front fork. Since it can measure to 250 cc, it is touch exactly good for fork oil exchange of TW. Since there is also no fear of falling and falling and there is also no fear of a main part also breaking even if
It was used for the oil change of a front fork.
Since it can measure to 250 cc, it is touch exactly good for fork oil exchange of TW.
Since there is also no fear of falling and falling and there is also no fear of a main part also breaking even if it will leave the spot, by the time air bubbles fall out, since the lid made of a rubber is also attached, it is safe.
I think that most fears of falling since the step is also solid cannot be found.
The accuracy of a scale also thinks that it is the more legible one with it being satisfactory.
View detail
Even if it does not go to OH of a front fork, I would like to do oil and spring exchange by myself. One article required for an oil change. An oil amount can be measured correctly, and oil can be put in, without spilling. This and a daytona: I
Even if it does not go to OH of a front fork, I would like to do oil and spring exchange by myself.
One article required for an oil change.
An oil amount can be measured correctly, and oil can be put in, without spilling.
This and a daytona: If there is a DAYTONA Faulk oil level adjusting tool, it will be the more Moors, the better victory.
View detail
F Faulk has oil leakage and it purchased to O/H. It pours like a photograph, there are opening etc. and TSUTA of the rubber, etc. are equipped. Although it seems that there was thinking [ little ] that it put in slightly more mostly than a display
F Faulk has oil leakage and it purchased to O/H.
It pours like a photograph, there are opening etc. and TSUTA of the rubber, etc. are equipped.
Although it seems that there was thinking [ little ] that it put in slightly more mostly than a display a little, since the using feeling was good, four stars were used.
View detail