Reviews
Rubber hose is consumable!
[How is it used?
Used for SUZUKI/CHOINORI Fuel Hose and Negative Pressure Hose.
I purchased this product to replace the hose that had been attached to my car because it had deteriorated over time.
How was your experience with it?
It is brand new Rubber so it is very soft.
Does this make it easier to get the fuel down? I think it has become easier.
How did it compare to other products?
We selected KIJIMA because it was the one with the lowest gold price, although other manufacturers also offer similar products.
I am glad to hear that it is working fine.
[Points to note]
You will be handling Gasoline, so be careful not to ignite it.
View detail
Durable!
Colorful and good looking Fuel hose. In the product description section Vulnerable to ultraviolet rays." It was stated that the Is it less durable?" I was convinced that it was a good idea to buy it, but I don't see much difference in durability between it and the OEM fuel hose. I am recommending this product because it looks very different and cool! View detail
For those who feel more comfortable seeing what's inside.
[How is it used?
I purchased this product to refresh the hose around the fuel cock and carburetor of a vehicle I have owned for many years, as they have begun to harden over time, while keeping costs down.
Thanks to the fact that the same parts were used in vehicles up until recently, OEM parts are available for hoses, but they are a bit expensive, and the price is a bit high. CostCut" "Where commercial products can be used, CostCut uses commercial products." So I checked Webike and found that KIJIMA's Hose was cheaper this time, so I bought it.
Was the one you received as per Image?
The familiar Clear pink Fuel Hose, a supple and flexible Fuel hose, which is natural since it is brand new.
Incidentally, the OEM fuel hose we had been using up until now had no cracks, but it had deteriorated over time and was in a bad shape, making us glad we replaced it.
How was your experience with it?
We replaced the above-mentioned CaChicatiHose with this flexible product and everything is better.
The part used is a Carburetor drain hose, and the new one is good.
[Points to note]
Several different sizes of HoseLineup are available in the same package, so be sure to check the inside diameter of the hose you want to replace and order the size that fits.
How did it compare to other products?
I have only used KITACO and KIJIMA products, but I think they are both similar products and there is no problem no matter which one you buy.
I feel that the pink clear type fuel hose hardens a little faster than the black rubber hose, etc. If you do not neglect daily maintenance, there is no problem, but for a lazy person like me, it is better to check it once a year or so. I felt it would be better for a lazy person like me to check it once a year.
Other items that would be helpful
Point and hang of installation
I am not sure if I am doing it the right way, but if I apply a small amount of silicon grease during installation and insert it into the cook, it works Smoothly.
As a matter of course, let's pass the Clip through the hose first before jointing the hose.
The most Large-picture work may be to insert it firmly and prevent it from coming loose with a firm hose band.
[ITEMS TO BUY TOGETHER
The inside diameter of the hose from the fuel cock and the hose around the carburetor may be different, so be sure to check the inside diameter of the hose that was originally installed before purchasing the appropriate product.
If the Fuel Hose is replaced with a new one, it may be better to purchase a new Hose clip (Hose Band) as well, considering its deterioration over time.
[Opinions and requests to Manufacturer
Please continue to sell this product as long as possible, as it is necessary to replace the fuel hose on older motorcycles.
View detail
To Refresh around Fuel Cock
[How is it used?
I purchased this product to refresh the Fuel Cock area of my 27 year old SEROW225 WE.
Thankfully, Yamaha still sells the 1997 SEROW225 WE Fuel CockAssembly, but the price tends to be higher.
So, we searched Webike to try CostCut using the available Universal Product, and decided to purchase a Fuel hose made by KIJIMA, which we have been using for a long time.
Incidentally, the 1997 SEROW225 WE will need three fuel hoses, each PipeFuel1 for $715. Pipe2 for $1,331. Hose for $275. for a total of 2,321 yen. (The "Spring Compression" used for Pipe2 will be used again.) 。
Did you receive the item as per the Image?
It has the same inside diameter as the SEROWOEM Product and is a supple and flexible fuel hose, which is natural since it is new.
Incidentally, the OEM fuel hose we had been using up until now had no cracks, but it had deteriorated over time and was in a bad shape, making us glad we replaced it.
How did you like it?
We replaced the above-mentioned CaChicatiHose with this flexible product and everything is better.
The two-layer Type is a reliable and secure product that is resistant to breakage even when curved.
[Points to note]
Several different sizes of HoseLineup are available in the same package, so be sure to check the inside diameter of the hose you want to replace and order the size that fits.
Too thick will increase the risk of fuel leakage, and too thin will affect fuel flow.
How did it compare to other products?
My personal impression is that clear type fuel hoses in pink, etc. tend to harden easily, which is not a problem for those who do not neglect daily maintenance, but for a lazy person like me, a product like this with high durability and weather resistance would be safer.
Other items that would be helpful
Point and hang of installation
I am not sure if I am doing it the right way, but if I apply a small amount of silicon grease during installation and insert it into the cook, it works Smoothly.
As a matter of course, let's pass the Clip through the hose first before jointing the hose.
The most Large-picture work may be to insert it firmly and prevent it from coming loose with a firm hose band.
[ITEMS TO BUY TOGETHER
Hose clip if you have a new fuel hose. (Hose Band) may also be better to purchase new ones to account for age-related deterioration.
[Opinions and requests to Manufacturer
Please continue to sell this product as long as possible, as it is necessary to replace the fuel hose on older motorcycles.
View detail
I can't find anywhere that sells parts.
This is very helpful since there are no Motorcycle parts dealers nearby,
The product is cosmetically excellent.
View detail
Buy φ5mm for APE
The one I was using deteriorated, so I replaced it.
Color Hose changes the appearance.
View detail
It is not very durable, but it does the minimum!
[How is it used?
Breather Hose 650mm 6mm Diameter from Tank has deteriorated, so a new Breather Hose was purchased.
This length was selected because the length must be long enough to allow for the need to make additional connections.
How was your experience with it?
When new, the softness and elasticity make it easy to install.
Although it is not suitable for places with high heat, it is Oil Resistant Hose, so quality is not a problem.
How did it compare to other products?
I appreciate the fact that I can buy it at Meter because other companies' lengths are too short. I think the black Fuel hose is more weather resistant, although it is more expensive.
[Points to note]
It is not very weather resistant and hardens after a while, so it should be replaced periodically.
Although it may not be of much concern to some, rubber parts inevitably deteriorate over time and should be considered consumable parts and replaced regularly.
View detail
Clear hose 105-075
Used for Breather Hose 650mm 6mm Diameter for open battery.
Is the name right? It's the Hose that's down from the side, pulling out the Gas.
My Z needs a long length to hang down to the bottom of the exhaust system. (There is also a turn along Tire house) The hose that comes with the Battery is not enough at all.
The price was almost the same as the material store, which is good.
The construction is fine, thick-walled and thicker (8" OD), so it was difficult to pass through in some places, but no problem. It is better than the cheap ones.
Incidentally, I tried an inexpensive Silicon tube once before and the entrance side fell apart in less than a year.
View detail
Something to have on hand to help in an emergency.
Used for hose of RadiatorReserver tank.
I originally purchased it for that purpose, but when the Fuel Hose died due to deterioration on the road and started leaking fuel, I used this one that I happened to have with me for emergency treatment.
Since Universal is expensive in terms of size, it would be a good idea to buy one for a processing base for now.
View detail
I use it on an external carburetor.
I bought the carburetor as Other Brand Product, but it didn't come with Hose, so I bought this one separately.
I think Skeleton type is better because you can see the flow of Gasoline.
good point
You can see the flow of Gasoline.
Oil resistant, so of course it is strong against gasoline.
You can use Scissors or Cutter to cut to your desired length.
Hose products also deteriorate, so it's good to have them as Spare.
View detail
It's neither good nor bad
I used it when carburetorOH.
I used it to come down from the tank and where it branches off into the carburetor.
I think it's thicker and less likely to deteriorate.
View detail
Texture is pretty good.
I changed Fuel hose when installing Fuel Filter. Feeling touch, supple, resilient With just Rubber, look different, slightly Gray color. Hose itself is a pretty good feeling. The included Hose Band is no better than Toy. Even if I deduct it, I am satisfied with COSPA. View detail
Purchase for attaching Fuel Filter
The appearance also feels like touching a little bit. Compared with ordinary Hose, it is soft and resilient little Gray color. I feel secure.. I think it's pretty good. View detail
Oilproof ColorHose
I use it for Hose that is out of fuel Cap. It was once fuel system so I made it Oil Resistant Hose. For Oil Resistant Hose it was inexpensive for Length so it seems to be used a lot. It seems that there is no danger even if there is durability. View detail
Fuel Hose
Because Fuel Hose was deteriorating
Adopt this double structure Fuel Hose
The feeling that I installed is thick and feels like it will take me for many years
Just installed it is about a month so expect in the future
Leaks, cracks etc.. I can not see
There is also a length and it seems that it can be exchanged about twice
View detail
It decided to exchange, since the carrying-out-Tank Hose has deteriorated.A Hose size is also abundant in the products made from a KIJIMA, and since there are also several kinds of Colorings, they were united with the car body and it is very much satisfie
It decided to exchange, since the carrying-out-Tank Hose has deteriorated.A Hose size is also abundant in the products made from a KIJIMA, and since there are also several kinds of Colorings, they were united with the car body and it is very much satisfied with the Cost performance of products rather than anything at a low price. View detail
[Webike Monitor] It is used for exhaust air omission of the Brake. A Brake fluid will neglect it, without [ detrimentally / it does not very seem to be and / and ] washing, once it uses it although it is actually harmful, and will change into the
[Webike Monitor] It is used for exhaust air omission of the
Brake.
A Brake fluid will neglect it, without [ detrimentally / it does not very seem to be and / and ] washing, once it uses it although it is actually harmful, and will change into the state which cannot be used. washes and dries, it can use repeatedly.I am replacing on the grounds that the
Brake fluid is humidity strict prohibition.
View detail
[Webike Monitor] Since there was pliability, when easy and good of the attachment could be carried out, I wanted you to lower a price to a slight degree.
[Webike Monitor] Since there was
pliability, when easy and good
of the attachment
could be carried out, I wanted you to lower a price to a slight degree.
View detail
[Webike Monitor] Since ZXR250 is phi 7, it is adapted. Since it is if durability is good, it is exchange.
[Webike Monitor] Since
ZXR250 is phi 7, it is adapted.
Since it is if durability is good, it is exchange.
View detail
It exchanged for the fuel hose hardened to the tick tick which passed for ten years or more. Since it is sticky and solid although it is flexible, it is good touch. Hose-related desorption became unreasonably easy anyhow. Since the place which
It exchanged for the fuel hose hardened to the tick tick which passed for ten years or more.
Since it is sticky and solid although it is flexible, it is good touch.
Hose-related desorption became unreasonably easy anyhow.
Since the place which is not visible if a hose will pass as long as ten years breaks and carries out [ it is sufficient for it and ], does an engine become good in a tune if it exchanges?
an inside diameter and die length -- it was good to exchange drastically, although it measured and was quite troublesome.
View detail