Reviews
I would love to see it sold in rolls.
Installed on a GSX-R1000R 2019
Used as Wiring protection for retrofitted electrical components.
Generally, PVCTube is used, but it needs to be threaded before attaching the coupler, and if the wire is long, threading it is also a tedious process.
Furthermore, once installed, it is time-consuming to branch out in the middle.
There are also options such as Colgate Tube and Spiral Tube for wiring that has already been installed, such as Coupler,
Colgate Tube is not very good looking and is not flexible, and Colgate Tube is too stiff to begin with, and may give Damage to Wiring. (especially at both ends)
Spiral Tube is not very good looking, very troublesome to install, and has many gaps, so its protection performance is not very good.
and none of them were willing to actively use it.
That is where this product comes in.
This product is similar to the Colgate Tube in that it is a rounded Habit-attached Sleeve that wraps around the Wiring, so it is easy to put on and take off.
However, this product is different from Colgate Tube,
Cloth-like appearance and high texture
OEMHarness-like atmosphere and not too conspicuous
Flexible and Flexible
Not hard, so it is friendly to Wiring
and Merit everywhere.
It is the best, to say the least.
I am even wondering if I should buy it in Large quantity and Wrapping all the retrofit Harnesses with it.
NegativePoint is ….
If I had to say, it would be the selling method.
Since it is only sold in 1m lengths, it is relatively expensive and not available in lengths longer than 1m.
Also, although there are few situations in which more than 1 m of 1 pc material is needed, it is rare for 1 m to be used up in a good Drill, so a few cm of the SIDE will be Garbage every time.
I would like to see these products sold in rolls of 5m or 10m units.
It is also more eco-friendly, as no scraps are produced.
Anyway, I couldn't be more satisfied with the thing.
Personally, this is my best buy of the year.
We hope Manufacturer will consider selling the product in rolls.
View detail
CRF250L MD47 for ACCWiring extraction
Used on a 2023 CRF250L.
If you remove the Left Side Cover, you can access the upper area of the Accessory Case, where there is a 4-pin Optional Connector hidden by the Waterproof Cover. There is a 4P Optional connector hidden by the waterproof cover.:Since 2pc is ACC, we used this Connector to take out ACC and used it for ACC connection of DAYTONAD-UNIT.
View detail
This is a summary purpose of the branched Wiring.
[How is it used?
To consolidate additional and branched wiring in the front cowl of ADV160.
Was the one you received as per Image?
The size and texture were exactly as shown in the Image.
Was the installation difficult?
Simply remove part of the Cowl and reinsert the Wiring.
How was your experience with it?
It is nicely put together, and since it will also be Cover, we can expect Simple Waterproof.
View detail
Easy to use
Used for Wiring protection around Engine.
The Protective Tube is easy to install and looks like a tube, whereas a normal Protective Tube requires the Connector to be removed.
It would be even better to have Variation such as White color.
I gave it a 4 because it has just been installed, but I don't think there are any problems with its effectiveness.
View detail
It can be used normally
It was rather expensive, but I needed it, so I bought it. View detail
KIJIMA KIJIMA Self-wrap Sleeve
[How is it used?
Dress-up Wiring in Quick shifter.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is easy just to wrap it around. Can be cut with Scissors to any desired length.
How was your experience with it?
It was a bit Race ish.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
View detail
KIJIMA KIJIMA Self-wrap Sleeve
The coupler can be wrapped directly around the wiring for easy installation without the need to cut the wiring or remove the coupler.
It is available in several thicknesses, making it ideal for dress-up.
View detail
Convenient!
I didn't know there was such a thing! I was surprised and bought it.
I used it in a place where I could connect it with Bullet Terminal, but it would be lumpy and I wanted to put it together in SMART.
You need to melt the solder, so you need to put heat into it.
View detail
Nice finish.
It is a ready-made branch Bullet TerminalWiring.
It's well made and won't get shredded or weird.
It saves valuable time and is cheaper than having the materials available for local use.
View detail
Sufficient performance
Accuracy is good, and the Bullet Terminal snaps into place in a small, spontaneous way.
The Rubber seal is of good quality and still holds up well about two years after installation.
If I ever get the chance to use it again, I will choose this one.
View detail
This product is very easy to use, I was connected to the ignition coil, shock-resistant, but also a little bit of water use, I will recommend a friend to buy again. *** This product is very easy to use, I am connected In the coil, it is resistant to vibra
This product is very easy to use, I was connected to the ignition coil, shock-resistant, but also a little bit of water use, I will recommend a friend to buy again. *** This product is very easy to use, I am connected In the coil, it is resistant to vibration and has a slight waterproof purpose, and I will buy it again. View detail
OptionCoupler
By installing ETC, you can install it without damaging the OEM's Wiring. Basically I do not like interrupting OEMWiring and connecting it. I had a hard time finding out. View detail
Where Waterproof performance is required
【What made you decide the purchase?】
I was looking for Waterproof Coupler for Automatic for Vehicle where I was using it for use.
【How was it actually used?】
It was as expected as it was also used for each car OEMHarness.
[Others]
I think Mark probably matched the Coupler, so probably it was manufactured by Mr. Sumitomo Electric.
Since there was Catalogue from Mr. Sumitomo Electric, as a reference.
HMWaterproofSeries
Applicable wire Size : 0. 3~1. 25mm2
Applicable wire finished outer diameter : 1. 8~2. 9mm
Applicable wire example (mm 2 / sq) :
AV 0. 5~1. 25
AVS 0. 3~1. 25
AVX 0. 5~1. 25
AVSS 0. 85~1. 25
AVSSX 0. 85~1. 25
* Terminal itself is 1. 4~2. It corresponds to 9 mm, but since WireSeal does not correspond, 1. I write as 8mm ~.
View detail
When a Tail light was exchanged for an external article, the Fender back side was wired with the plug terminal. it decided , however not to arrange, unless it ties checking the combination of a plug whenever it removes, but to exchange for a Coupler,
When a Tail light was exchanged for an external article, the Fender back side was wired with the plug terminal.
it decided
, however not to arrange, unless it ties checking the combination of a plug whenever it removes, but to exchange for a Coupler, since it was troublesome, and since it was a place which receives splashes of mud etc., it ranked next and was alike and exchanged for the water proof Type.
Since it must caulk simultaneously with a Seal when caulking, a hang may be necessity a little.
The degree of satisfaction after the
Seal stuck seriously, has played the role and finishes constructing wiring is quite high ^^
View detail