Reviews
Fine rust powder passes through.
Take it for a spin on the Hose from the Fuel Cock to the Carburetor. It is better than nothing. By the way, the rust powder of Tank passes through and enters the carburetor. Plastic deteriorates quickly over time, so we keep some in stock in case it breaks down. Replacing the fuel Pipe is quite tricky as it seems to be a simple but important part. View detail
The packaging is too messy.
The product itself looks good and well made, but the packaging is too messy. When I opened the box after receiving the product, the product was out of the Package.
The package was stopped at the four corners and at the stapler, so it was not popped out during shipping or anything like that.
I am concerned that there may be a defect as it seemed to be rolling around in the corrugated cardboard when it was given to me by the shipping company.
View detail
Improved handling
[How is it used?
I used to use DAYTONA's Filter, but I was concerned about the handling of the Hose, so I replaced it with this product.
We chose this product because it is 8mm compatible and L-shaped.
Was the one you received as per Image?
It was just like the picture.
How was your experience with it?
The L-shape allows for more flexibility in the Fuel line.
I have not started using it yet and do not know if it is Catching the garbage, but the Filter is solid and seems to be working fine.
The transparency is better than DAYTONA's, so it is easier to check the internal condition.
[Points to note]
Note that there is a mounting orientation.
The body and package are clearly marked, so be sure to check them before installation.
How did it compare to other products?
As mentioned above, it was replaced from Daytona's Filter.
I don't know if there is a difference in the ability of the system to handle the same amount of power, but so far I am satisfied because I haven't had any jamming or overflow.
【Review】
It is an L-shaped Filter and relatively inexpensive.
I am satisfied so far, as it is easy to check the internal condition.
View detail
Size is exquisitely good
I have been using Fuel Fliter for a long time to avoid clogging and trouble in the carburetor due to foreign substances in the fuel. View detail
For Sub tanks
I bought this because of the possibility of contamination of garbage when using a Sub tank without any Filter.
I have no complaints, but I found it a little confusing that there is no description of the direction of the Filter.
View detail
KIJIMAFuel Filter
I tried installing a cheap Filter before.
I purchased KIJIMA's Filter, which looks great this time!
It's a Glass type that allows you to see inside well and clean it, so it's a commendation!
View detail
To old Motorcycle because the inside of the Tank is also old.
It's good for Carburetor Vehicles because you can see the Gasoline movement. View detail
Nylon meshL shape
There are many types of Fuel filters, but it is difficult and troublesome to know which one to buy at a glance.
I needed an L-shape for handling, but it was a hassle to find an L-shaped Gold genus Filter one, so I went with this one.
View detail
I bought a few different kinds.
I have been using PaperType so far, but I also bought Nylon mesh Type.
Nothing personal, but it is a little more compact, so handling in the vicinity of the carburetor is improved. The resistance is gone, but I am observing whether the Float chamber contains Garbage or not.
View detail
A Harley must have!
With the HarleyShovel Fuel Cock breakage and carburetor overflow, we decided to install this Fuel Filter.
The inside diameter of the hose was 7.9mm, so it took some force to insert it.
KIJIMA's Fuel Filter was previously installed on an XL1200C SPORTSTER 1200, so you can be assured of its quality.
I think this MODEL will MATCH Harley in particular.
Shake condition while driving due to severe Engine vibration.
Filter function is fine.
Since it is glass, the Hose was secured with Tie Wrap to prevent it from hitting the Cylinder.
I am satisfied with Large because it looks good.
View detail
To TMR-MJN.
The cheap Filter I put on at first was pulled at an angle and bent, so I replaced it with an L-shaped one made by KIJIMA. It is not bad looking. View detail
Can be visualized
I have had no problems without using Fuel Filter until now.
However, I saw someone I know wearing it and bought it to try it out because I could visualize the iron dust-like substance being removed.
Installation takes only a few minutes with no problems. I recommend it to anyone who cares to visualize it.
View detail
On an old Motorcycle
When I cleaned the carburetor on my old Mini bike there was rust on it so I installed it as a precaution.
It is made for a reasonable price, but it seems to be well filtered.
I don't know how durable it is.
View detail
Parts that can be itched.
[How is it used?
We decided to update the Filter, which had deteriorated over time. The previous filter was hidden by the frame and difficult to see, so we decided to change its installation position, which required a 90-degree curved L-Type filter.
Was the one you received as per Image?
The size was just the right size for Compact.
Was the installation difficult?
It is a simple process of inserting and removing the Fuel Hose, but this time the entire Hose was replaced since the Hose's routing was also changed.
How was your experience with it?
It is convenient because it is now easy to see at a glance how dirty the Filter is.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
The product itself is not particularly disappointing, but since the installation position was changed this time to directly above the Engine Case, it became necessary to pay attention to deterioration due to heat damage. We will check the situation for a while and if necessary, we will change the installation direction or attach a heat shield Seat.
View detail
With Magnet is fine!
I replace it regularly to prevent clogging of Carburetor. The price is reasonable and I recommend it. View detail
Fuel Hose for old Scooter
When replacing the Fuel Hose on an old Scooter, I installed this Fuel Fliter to kill two birds with one stone, since bending the Fuel Hose to 90-degrees eliminates bending of the Hose. The fuel flow is also visible, so maintenance is easy. View detail
As a precautionary measure.
I used it on a MONKEY Fuel Tank that I had rusted off.
I had the tank rusted and the holes repaired, but I wasn't sure if the Garbage, Sludge, etc. were completely removed, so I put it on.
It certainly seemed to work, but as a result, the Filter itself became clogged with Gas and became unusable.
Thanks to you, there is no inflow of impurities into the carburetor and it works (laughs).
View detail
Larger than expected
If you have a car that doesn't have a space, you can install it, but it will be a bit messy and unparenthesis. Garbage removal performance is fine. The flow rate is also fine. View detail
Prevention of Fuel Hose Bending
I think the main purpose is to Catch rust and Garbage with Filter, but I bought 90-degreesType to solve the bending of Hose.
A little more compact would be even better.
View detail
I change mine regularly!
I replace them regularly when they get dirty.
This is an insurance policy to prevent the Carburetor from malfunctioning.
I also like the L-shape.
View detail