Reviews
tw200
The appearance has been improved by the Large change,
The instruction manual was easy to understand and I had no trouble installing it.
View detail
Fits: YAMAHA SR400, YAMAHA Cerro 250, YAMAHA TW200, YAMAHA TW225E, YAMAHA SR400, YAMAHA Cerro 250, YAMAHA TW200, YAMAHA TW225E
Cost and Performance
Power Filter, the standard Tune for intake and exhaust, Powerful.
The Power Filter makes the air flow smoother and provides air without stress to the throttle work, making the engine more responsive and increasing torque and power.
Throttle response when opening the axel has also been improved, and you will be surprised at the difference in the comfortable start.
Setting the carburetor and injector is essential for installation. After the carburetor and injector are installed, the power of the carburetor and injector can be experienced, but there are also Merit and Demerit.
Merit to be replaced by Power Filter
[Merit1] Power up The shorter the intake pipe is and the rougher the filter is, the more air resistance can be reduced by replacing it with an air cleaner. 。 Most OEM filters that use filter paper, etc., have low airflow per area and large intake resistance, whereas the mesh Power Filter has much lower intake resistance. 。 When the intake resistance is reduced, the negative pressure resistance when the piston is lowered during the engine intake process is also reduced, so both power and response can be increased. 。 The higher the RPM, the more air intake per hour, the larger the benefit will be, and as long as the fuel condition is well controlled, the power can be increased by replacing the power filter. 。
[Merit2 Sound change The Merit of replacing with the Power Filter is that the intake sound becomes easier to hear. 。 Normal air cleaner box is designed to reduce intake noise, so intake noise is barely audible 。 The bare power filter directly emits the sound of the engine intake, and this alone creates a sporty atmosphere. 。
[Merit3 Space-saving By eliminating the air cleaner box, which occupies a large volume of space in the motorcycle, the available space can be effectively utilized. In addition, it contributes to weight reduction. 。 Mopeds with less loading Space can increase their loading capacity, albeit slightly, by installing an Accessory Case! 。
It seems to be a Power Filter full of good things, but there is also this Demerit.
Power Filter Demerit
[Demerit1] When replacing the noisy Power Filter, not only the intake sound but also the blasting sound of the Engine and even the Mechanical Noise can be heard.
The air cleaner also serves as a silencer, and replacing it with a power filter will significantly reduce the silencing performance of the intake system, etc., so when the RPM is increased, the noise may be greater than the exhaust noise. 。 I like it (laughs).
[Demerit2] Low-speed Torque becomes thinner and harder to ride. 。 The Power Filter and direct carburetor certainly increase power by reducing intake resistance, but precisely this is only the result of the TorqueBand shifting to a higher RPM side. Therefore, the starting acceleration may seem weak, or the TorqueBand may lack the feeling of Torque when the Throttle is slightly opened, and the motorcycle may become difficult to handle.
[Demerit3] If the Power Filter has a nipple to install the blowby hose, there is no problem if the hose can be inserted there. However, it is illegal to release the blowby gas discharged from the engine to the large airflow because there is no installation point for a blowby hose. 。 Blowby gas is sucked out by the negative pressure of the intake air and is discharged because the replacement of the Power Filter or opening of the large air intake does not provide enough negative pressure as the OEMAir cleaner box does, and blowby gas cannot be sucked out as efficiently, The increase in the internal pressure of the engine crankcase prevents the piston from moving, resulting in power loss. 。 While replacing with a power filter will increase power by reducing intake resistance, it may also cause power loss by reducing blowby gas discharge efficiency.
Based on Merit and Demerit, I purchased KIJIMA's Power Filter this time, and it is not bad relatively speaking. In a word... it runs well (with Carburetor setting).
good point
◎Filter capacity, well treated joints, and durable performance.
◎Cheaper than K&N.
After Fire will not appear.
A bad point
◎ Cannot be used on rainy days. →Because it absorbs water.
◎Intake noise became annoying.
◎Carburetor setting is required.
◎Engine characteristics become closer to high rpm. →If I say that it has come to revolve, it does (laughs).
◎Cleaning will be necessary for the blisters.
Some people do not have the Merit to install the Power Filter from Demerit, but it depends on how you use it and the form you want to use it in.
The purpose is to set the intake and exhaust to match the current running conditions. 。 In such cases, we think the Power Filter is a logical part.
View detail
Installed on VIRAGO250
The size fits the intake of my VIRAGO 250 just right. The price is low and the quality is not bad, so I use it for other vehicles as well. View detail
It was new and had some kind of Stain on it.
I installed it on a K&N filter and it held tight. However, there was a 5mm large stain on the filter even though it was brand new, but the cleaner did not remove it. View detail
Fits: YAMAHA JOG, HONDA monkey, HONDA Monkey Baja, HONDA Dio, HONDA CB500F, YAMAHA MINT, YAMAHA TZR50, YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA JOG80, YAMAHA JOG-Z, YAMAHA JOG50 Sports, YAMAHA CHAMP80, YAMAHA CHAMP-RS50, YAMAHA CHAMP-CX, YAMAHA CHAMP, KAWASAKI KSR-II, YAMAHA ALLCHAMP, YAMAHA BWS, KAWASAKI KS-2
Cancellation.
I asked for it this morning and it is safely Cancelled. View detail
NORMAL Parts discontinued.
The OEM Product was discontinued, so I put on this product. The carburetor needs some adjustment, but I use it without any problem. View detail
Asymmetric shape is good
[How is it used?
NSR250R (MC21) I was looking for an air cleaner that matches the size of the TA22Carburetor (54mm).
The OEM air cleaner box was originally missing, so I would have preferred the OEM one, but I chose this one because used parts are very expensive and I basically don't ride in the rain.
Was the one you received as per Image?
It was just like the picture.
Was the installation difficult?
The TA22carburetor is so close between cylinders that a regular cylindrical one would interfere.
This product could be installed thanks to its Oval and One Side joint.
Installation is instantaneous as all you have to do is tighten the band.
I was a little concerned about the loose insertion before tightening the band, but once the band is tightened, it is firmly secured.
How was your experience with it?
NSR250R for Package (up to 89) but MC21 (90) But there was no problem.
It is a mystery why Carburetor is almost the same, but it is compatible up to 89. Is it because the shape of the air cleaner box changes and it is not confirmed yet? I think it is because the shape of the air cleaner box changes and has not been confirmed.
There was no particular interference with the Fuel Tank or Others components.
It is universal, but as stated in the Package, it seems to fit NSR250R/NS250/CB750F/CB900F/GSX1100S.
[Included Parts:were they on?
The tightening Bandetc. is also included in the package.
As long as you have a Driver, you can install it.
[Was there anything that disappointed you?
Not particularly
【Review】
The asymmetric shape is good for TA22.
It is difficult to say what the compatibility information is, but I am satisfied because it is cheaper than buying a used air cleaner box and filter.
View detail
Fits: YAMAHA Cerro 250, YAMAHA TW225E, YAMAHA TW200, YAMAHA Cerro 250, YAMAHA TW225E, YAMAHA TW200
Early exchange
Replacing TW225E's.
The shape was Straight and differed in that the Pipe of the Blowby gas pointed downward.
When I put it on, the effect was great and I no longer have the symptoms of misfirea.
We recommend early replacement, at about the faded stage.
View detail
Cannot be installed on Posh face Power Filter!
After purchasing the Posh face Efficient Air Filter, I purchased the KIJIMA AluminumLineGuard, but I just could not install it. I managed to install it by bending the lower part of the bolt hole with pliers and radio pliers, but I wish they had written in the product description that only K&N can be installed so that I would know immediately.
It's a shame
View detail
Fits: YAMAHA JOG, HONDA monkey, HONDA Monkey Baja, HONDA Dio, HONDA CB500F, YAMAHA MINT, YAMAHA TZR50, YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA JOG80, YAMAHA JOG-Z, YAMAHA JOG50 Sports, YAMAHA CHAMP80, YAMAHA CHAMP-RS50, YAMAHA CHAMP-CX, YAMAHA CHAMP, KAWASAKI KSR-II, YAMAHA ALLCHAMP, YAMAHA BWS, KAWASAKI KS-2
KIJIMA KIJIMA Air cleaner
Used for NSR50.
Installation is not difficult and easy.
The air cleaner is considerably smaller than the OEM air cleaner, making it easier to maintain.
View detail
every day without fail
When I go for a walk, I dissolve it in water, put it in a plastic bottle, and carry it around with me hanging on my waist. Since I started taking it every day without fail, the pain in my legs and knees has disappeared. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA Cerro 250, YAMAHA TW225E, YAMAHA TW200, YAMAHA SR400, YAMAHA SR500, YAMAHA Cerro 250, YAMAHA TW225E, YAMAHA TW200
Parts that can bring out the performance of OEMcarburetor.
I use it on my SR400 and was thinking of going with the FCR Carburetor Body or CRcarburetor but wanted to try it out first.
The caveat is that you have to buy the Joint separately.
Main is stable at 175.
good point
Torque up is quite a bit.
While reducing the intake resistance, it also blocks harmful substances such as garbage from entering the engine.
The low price makes it easy to use Repeat.
A bad point
You can't use it on rainy days because it absorbs water.
If the carburetor setting is not set properly, the performance will not increase but decrease.
It takes a lot of time and effort, but the results are worth the effort.
It's good for people like me who still want to see the potential of the OEMcarburetor.
View detail
FTR223
I bought this as a replacement for the Power Filter on my FTR223. The quality and design are perfect. View detail
I don't like it.
【good point】
None
[Bad point]
I tried to install it on the TW, but I couldn't do it due to a bad shape.
Moreover, it is only made by bending a plate of aluminum.
It's not end-faced, so if it's handled incorrectly, it will usually cut your hand.
Wouldn't you break your pants if you ran with them on?
[Summary]
It's a product that I felt was not for me.
I regretted buying it.
View detail
Fits: KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr X
Maybe not so good …
I installed it on my C2 ZEPHYR400 OEM Carburetor, but by myself. I couldn't get the settings out of the carburetor, so I removed it. It is very easy to install and if you can get the settings of Carburetor out, you can use it without any problem. I think, there was a lot of yellow dust in the Filter. I was worried that I was going to end up in Carburetor.
View detail
It's a great tool for touring in the rain
[Was there anything that disappointed you? None
Do you have any wishes or improvements you would like to make for the Manufacturer? Simple structure, but I think it is sufficient
[Do you have any products to compare it to? K&NPre-charger
What made you decide to buy? Unlike a pre-charger, it doesn't seem to accumulate rainwater
How was your experience with it? No problem
Was the installation difficult? I removed and installed the tube that connects the filter to the carburetor
【Please tell me the installation point and hang】 When it is only made to interrupt normally, the extra force in the Tube coupled with the weight of the Air Filter Protection's tear is now fixed to the Frame with Tie Wrap
[Was the Instruction Manual easy to understand? No problem
[Included Parts:were they on? Double-sided Tape
[Others] There was a crack in the connection part with the tube He said it was cut for I don't think there should be any cracks
View detail
Fits: YAMAHA Cerro 250, YAMAHA TW225E, YAMAHA TW200, YAMAHA Cerro 250, YAMAHA TW225E, YAMAHA TW200
You'll want to create a Bracket separately
I've admired the word "powerful" since I was in high school It seemed so fast
But when I became a Large person, I heard that I'm not good in the rain or something like that So I was a bit hesitant to become a Large person
Eventually I forgot about Powerful and before I knew it I was this old That's me
This is what I put on my TW200
The Power Filter can capture more air than the OEM filters Theoretically, the explosion in the Engine will be large, and the Speed and Power will be reduced to This is one of the recommended intake and exhaust parts for those who want to raise it, but it has a weakness:it is vulnerable to water
That's right There's a carburetor at the end of this Filter, and beyond that is Engine
Goodbye to the air cleaner box that says OEM and goodbye to masala town!
If water enters the engine, some kind of malfunction can't be avoided
This product is a perfect example of the fate of POWERFUL, but I'm not sure I'm ready for the rainy season It was a grueling run
But it's about a 20-minute commute to work
In conclusion, we were able to afford it That is the first thing I will tell you But I don't know more than that
Installation
It's a car model Exclusive Design, so it came with no problems
You can buy a Universal, but if you have a dedicated one, you should buy a dedicated one Recommendation Don't do anything you don't want to do It is a family motto
There is only one problem, there is no bracket to hold the PowerfulBody in place
So it's just supported by the connection to the carburetor and the FilterBody is robustly gravity driven
I hope it's stopped, but if it's running, it's probably bran bran bran rocking, so I'll be honest, I'll connect it I am concerned about the degradation rate of rubber materials
And it's mentally tough to run with the possibility of breaking and dropping it at any moment I used Tie Wrap to hang it moderately from the Frame
But it's not cool, so I'm going to have to buy a Bracket from Homsen to fix it up Recommendation
In general, it's neither good nor bad It's just plain POWERFUL
View detail
Awesome Filter
Very Good air filter for Yamaha TW 200, very good service, Webike guys are genuine, Clean and fast delivery.One and only problem u will face from your country custom or Post offices. They will make some tax for no reason, Awesome item.Thank you guys. View detail
Fits: YAMAHA Cerro 250, YAMAHA TW225E, YAMAHA TW200, YAMAHA Cerro 250, YAMAHA TW225E, YAMAHA TW200
Parenthesis It's okay ~
I feel like this now, Parenthesis I wonder if ~
Not to be noticeable a little All black is also good.
Regrettable that there is no good at Parts for Rain Prevention ...
View detail
RainGuard
This item is not able to attach Blow-by Filter, but I tried wearing a bit of a workmanship.
Just bite Bracket and bend a part of this product lightly.
I do not mind doing it because I do not get on rain in the first place, but it looks like Large in taste!
Just before you install, details - I recommend you to wear it after you took out BALI at the edge.
View detail