Reviews
It helped me in a tight spot.
I used it on a Yamaha '82 POPGAL that a friend of mine had requested for repair.
I removed the tank and put a tacho string through the nut and shook it well to remove the large rust, but it was difficult to remove the thin rust. I had a few filters on the parts shelf in the garage, but I couldn't install the cover because it was hard to get into the POPGAL's narrow frame gaber.
It is really easy to use, and without this Filter, I had to turn the fuel Pipe longer to keep it from kinking, which is a big help, and it seems to collect a little rust in the Tank, which is great, and the Filter is transparent so I can see it better and replace it when it gets dirty.
It would be helpful to have a product with a little more capacity.
View detail
It was saved.
Large European blinker bulbs that were installed a long time ago were out of stock at home centers and car shops in the countryside, and there were no hits in the Internet search.
However, I loosened the search criteria and found it! Crying
Thank you for the help
I'll stock up next time.
View detail
Filter exchange
Easy to install and a good product. View detail
carburetor-friendly
Used for TACT CourregesA-AF09 in 1985.
My brother-in-law gave me a TACT almost 30 years after it was scrapped and I serviced it, but the inside of the tank was rusty. I cleaned it with Gasoline and wiped it down with Dustcloth, but I could not remove the fine rust.
The rust and garbage are removed very well, but I think I need to replace about 2 more tanks because there is a lot of rust on the tanks.
Installation takes less than 10 minutes because all you have to do is insert a spot between the tank's gas outlet and the carburetor's fueling port. It is recommended that you check the outer diameter of your car's gas cock and the space available for installation before purchasing the filter.
View detail
Fits: YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FZS1000 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZS1000 FAZER, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA XJR400R, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI VERSYS1000
beginner
First Motorcycle purchase in 25 years.
This is the so-called ReturnRider.
The Brake lever was broken after falling down during a UTurn on a Large Motorcycle.
I went to MotorcyclePartsShop but there were no applicable Parts!
I talked to a friend of mine and he told me about WEBIke.
I am satisfied with the fast shipping.
View detail
NORMAL Parts discontinued.
The OEM Product was discontinued, so I put on this product. The carburetor needs some adjustment, but I use it without any problem. View detail
Asymmetric shape is good
[How is it used?
NSR250R (MC21) I was looking for an air cleaner that matches the size of the TA22Carburetor (54mm).
The OEM air cleaner box was originally missing, so I would have preferred the OEM one, but I chose this one because used parts are very expensive and I basically don't ride in the rain.
Was the one you received as per Image?
It was just like the picture.
Was the installation difficult?
The TA22carburetor is so close between cylinders that a regular cylindrical one would interfere.
This product could be installed thanks to its Oval and One Side joint.
Installation is instantaneous as all you have to do is tighten the band.
I was a little concerned about the loose insertion before tightening the band, but once the band is tightened, it is firmly secured.
How was your experience with it?
NSR250R for Package (up to 89) but MC21 (90) But there was no problem.
It is a mystery why Carburetor is almost the same, but it is compatible up to 89. Is it because the shape of the air cleaner box changes and it is not confirmed yet? I think it is because the shape of the air cleaner box changes and has not been confirmed.
There was no particular interference with the Fuel Tank or Others components.
It is universal, but as stated in the Package, it seems to fit NSR250R/NS250/CB750F/CB900F/GSX1100S.
[Included Parts:were they on?
The tightening Bandetc. is also included in the package.
As long as you have a Driver, you can install it.
[Was there anything that disappointed you?
Not particularly
【Review】
The asymmetric shape is good for TA22.
It is difficult to say what the compatibility information is, but I am satisfied because it is cheaper than buying a used air cleaner box and filter.
View detail
Fits: HONDA Monkey R, HONDA Monkey R, HONDA Monkey R, HONDA Monkey R, HONDA Monkey RT, HONDA Monkey RT, HONDA Monkey RT, HONDA Monkey RT, HONDA NS50F, HONDA NS50F, HONDA NS50F, HONDA NS50F, HONDA NS50F, HONDA NS50F, HONDA NS50F, HONDA NSR50, HONDA NSR50, HONDA NSR50, HONDA NSR50, HONDA NSR50
CROSSCUB110 (JA60) Short Brake Lever for
I was looking for a Short Brake Lever for CROSSCUB110 and found this one after I mistakenly bought one for JA45 and spent over 6000 yen painfully. First of all, the price is about 1100 yen, and it is the best cost performance. The color is black, which is the same color as the Handlebar, and it matches well with it. The feeling of using it is like having a Large size hand. (Glove sizeXL) I can do it without any problem even with a 3-finger middle to small finger Brake on me Exactly. I am glad I bought it. View detail
Fits: YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FJR1300, YAMAHA FZS1000 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZS1000 FAZER, YAMAHA FZS1000 FAZER, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA XJR400R, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI VERSYS1000
Purchased as a replacement for OEMLever
I wanted to buy SEA BASSOEM Parts for my V-strom250 because the brake lever was broken, but I could not find a Lever Single Item because of expensive Assembly sales only. As a result, it was a good purchase with low cost and the same quality as OEM products. However, even if I maxed out the lever adjustment, there was not much play in the grip, so those with small hands may want to compare the two. View detail
Be careful how you handle it or it will crush you.
I purchased this product for the installation of a Fuel Filter.
Because of its thin wall thickness, tight handling will cause the hose to collapse and reduce the flow of Gasoline.
I find it convenient to be able to visually see the flow of Gasoline due to its translucency.
It is not as durable as Rubber hose, but I think it is unlikely that you will run out of this one purchase.
View detail
Foreign objects can be visually identified.
There was a sign of rust inside the Fuel Tank, so I installed it to check.
The high transparency and clear view of the interior made it easy to check for foreign objects.
I was worried about deformation due to heat, but there were no problems even after running around all day in mid-summer.
View detail
It is not very durable, but it does the minimum!
[How is it used?
Breather Hose 650mm 6mm Diameter from Tank has deteriorated, so a new Breather Hose was purchased.
This length was selected because the length must be long enough to allow for the need to make additional connections.
How was your experience with it?
When new, the softness and elasticity make it easy to install.
Although it is not suitable for places with high heat, it is Oil Resistant Hose, so quality is not a problem.
How did it compare to other products?
I appreciate the fact that I can buy it at Meter because other companies' lengths are too short. I think the black Fuel hose is more weather resistant, although it is more expensive.
[Points to note]
It is not very weather resistant and hardens after a while, so it should be replaced periodically.
Although it may not be of much concern to some, rubber parts inevitably deteriorate over time and should be considered consumable parts and replaced regularly.
View detail
It feels and looks good to hold!
[How is it used?
I was looking for a Black Lever because I wanted both. This product seemed to be cosmetically good, so I bought it.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It's easy; it's like replacing an OEM Lever.
How was your experience with it?
Not to mention it looks better. The grip is also more comfortable so you can Recommendation.
[Included Parts:were they on?
There were none in particular!
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
CRF250L MD47 for ACCWiring extraction
Used on a 2023 CRF250L.
If you remove the Left Side Cover, you can access the upper area of the Accessory Case, where there is a 4-pin Optional Connector hidden by the Waterproof Cover. There is a 4P Optional connector hidden by the waterproof cover.:Since 2pc is ACC, we used this Connector to take out ACC and used it for ACC connection of DAYTONAD-UNIT.
View detail
Nice touch!
Replaced because OEM was deteriorating.
It became transparent so that I could see Gasoline flowing and visually moe Point!
Cheaper and more satisfactory than OEM
Of course, the OEM band cannot be used because the size is different from OEM, but to prevent loss, it was attached as it is.
I'm not sure about the durability yet, so 3 stars.
View detail
This is a summary purpose of the branched Wiring.
[How is it used?
To consolidate additional and branched wiring in the front cowl of ADV160.
Was the one you received as per Image?
The size and texture were exactly as shown in the Image.
Was the installation difficult?
Simply remove part of the Cowl and reinsert the Wiring.
How was your experience with it?
It is nicely put together, and since it will also be Cover, we can expect Simple Waterproof.
View detail
Fits: HARLEY-DAVIDSON XL883L XL883SUPER Low, HARLEY-DAVIDSON XL883R XL883R, HARLEY-DAVIDSON XL883N XL883Iron, HARLEY-DAVIDSON XL1200CX XL1200C SPORTSTER 1200CXR100 ROADSTER, HARLEY-DAVIDSON XL1200X XL1200C SPORTSTER 1200 FORTY EIGHT, HARLEY-DAVIDSON XL1200V XL1200C SPORTSTER 1200Seventy-two, HARLEY-DAVIDSON XL1200C XL1200C SPORTSTER 1200Custom, HARLEY-DAVIDSON XL1200CB XL1200C SPORTSTER 1200CBLIMITED, HARLEY-DAVIDSON XL1200CA XL1200C SPORTSTER 1200CALIMITED, HARLEY-DAVIDSON XL1200T XL1200C SPORTSTER 1200SUPER Low
easy to grip
OEM replaced it because it was too thick and tiring.
Thinner than OEM for easier and less tiring gripping.
Installation is also easy with the help of videos, etc., so it is a recommendation.
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA Steed VLS Springer NV400CSW, HONDA CB750F, HONDA Bross 400, HONDA Zervis., HONDA Steed 600, HONDA Steed 400 VSE, HONDA Steed 400, HONDA jade, HONDA VRX400 Roadster, HONDA NS-1, HONDA CB125T, HONDA AX-1, HONDA CB600F, HONDA CB600F, HONDA VT250 Spada, HONDA Shadow Phantom 750, HONDA Shadow Slasher 750
Used for VTR250
OEM-like, yet inexpensive
The VTR250-03 I bought used had a Short Type variable lever, but it was difficult to use, so I switched to this one.
I think they are very similar to OEM parts. The cost is very reasonable, so even if you break it, you don't have to worry about it.
Don't forget Grease/Oil when replacing.
View detail
Fits: HONDA Steed 400, HONDA Steed 400, HONDA Steed 400, HONDA Steed 400, HONDA Steed 400, HONDA NV400, HONDA NV400, HONDA NV400, HONDA NV400, HONDA NV400, HONDA VF750F, HONDA VF750F, HONDA VF750F, HONDA AX-1, HONDA CB-1, HONDA CB1000 Superfor (Big One), HONDA CB1000 Superfor (Big One), HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB400 Superfor
Used for VTR250 No problem
I bought a used VTR that had a variable lever, but I didn't like it because it was too short, so I bought this one to make it more OEM-like.
[How is it used?
It is used for VTR250-03.
Was the one you received as per Image?
It is a normal OEM-like item. There is no particular difference from the image.
How was your experience with it?
Normal, just normal.
It's great that it doesn't hurt my heart if I knock it over at a price and break or damage it.
How did it compare to other products?
It is far from being compared to variable Lever.
[ITEMS TO BUY TOGETHER
Grease/Oil
View detail
Rust is visible!
Unlike disposable Filters, this is a cleanable Magnet In and is a safe choice for an older iron Tank. View detail