Reviews
Easy to use
It is a common Horizontal Type carrying can.
It combines all of the above:ease of use, ease of carrying, and ease of handling.
It is 10L, so the volume is not large, but that makes it light and easy to handle.
Recommended for those who do not have a carrying can or are purchasing a carrying can for the first time.
View detail
Filter part is pricey
If you want to put a Filter between the Fuel lines, it is difficult to bend the Hose if it is short, but if it is angled like this product, it will be neat. View detail
Kiboshi Terminal Set
Quality and Texture Information Typical Jiboshi Terminal Set Full of Male Terminal for usability Product Inquiry Crimper To Buy With, Female Terminal Easy to install Cost performance and comparison sets with other products are affordable WeBike packaging is always great. Arrives in a week for delivery and packaging I ordered it after looking at the word "set" to see if the translation was wrong when I bought it, but only the Male Terminal came and checked the site again, and the notice came up that there were 8 Male Terminals. I need to order again because it's internalism. It goes well with Honda View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA CB125T, HONDA AX-1, HONDA VRX400 Roadster, HONDA NS-1, HONDA jade, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA CB750F, HONDA Steed VLS Springer NV400CSW, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX125, HONDA CBR750, HONDA CBR400F
OK in its own way
I think it is suitable for old cars. if the length of lever is longer by 10mm, I feel it is easier to use. View detail
For branching
This is for use as a branch of a power supply.
110" 2PConnector, Pin Quantity:Set, but it would have been enough if we could have connected with other cheaper ones.
View detail
I like the way it looks.
The Fuel Hose is Black and invisible. I bought it because it seemed to have a good evaluation here to prevent foreign object contamination.
It is a good product because you can see inside and check the status, and it can be detached and disassembled for cleaning.
It is somewhat heavy, but is it reinforced to prevent damage? I thought so.
View detail
Be careful how you handle it or it will crush you.
I purchased this product for the installation of a Fuel Filter.
Because of its thin wall thickness, tight handling will cause the hose to collapse and reduce the flow of Gasoline.
I find it convenient to be able to visually see the flow of Gasoline due to its translucency.
It is not as durable as Rubber hose, but I think it is unlikely that you will run out of this one purchase.
View detail
The inside diameter is a little small.
[How is it used?
Used as Crankcase Internal Pressure Control Valve
Was the one you received as per Image?
Smaller inner diameter
Was the installation difficult?
None
How was your experience with it?
neither good nor bad
[Included Parts:were they on?
Hose clip
[Was there anything that disappointed you?
Diaphragm opening pressure is higher than expected
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HARLEY-DAVIDSON FLHT Electraglide, HARLEY-DAVIDSON FLHTC Electra Glide Classic, HARLEY-DAVIDSON FLTCU Tour Glide, HARLEY-DAVIDSON FLHTCU Ultra Classic Electraglide, HARLEY-DAVIDSON FLHRI Road King, HARLEY-DAVIDSON FLTR Road Glide, HARLEY-DAVIDSON FXST Standard, HARLEY-DAVIDSON FXSTB Night Train, HARLEY-DAVIDSON FLSTC Heritage Classic, HARLEY-DAVIDSON FXSTC Softail Custom, HARLEY-DAVIDSON FXSTS Softail Springer, HARLEY-DAVIDSON FLSTF Fatboy, HARLEY-DAVIDSON FLSTN Heritage Nostalgia, HARLEY-DAVIDSON FXSTSB Bad Boy, HARLEY-DAVIDSON FLSTS Heritage Springer, HARLEY-DAVIDSON FXSTD Deuce, HARLEY-DAVIDSON FXCW Locker, HARLEY-DAVIDSON FXCWC Rocker C, HARLEY-DAVIDSON FLSTSB Crossbones, HARLEY-DAVIDSON FLS Softail Slim
Blackout-ing Dynamo Dell's Brake
I have a Dynamo Dell Harley and wanted to blackout the brake lever, so I chose a slim lever. View detail
For Sub tanks
I bought this because of the possibility of contamination of garbage when using a Sub tank without any Filter.
I have no complaints, but I found it a little confusing that there is no description of the direction of the Filter.
View detail
KIJIMAFuel Filter
I tried installing a cheap Filter before.
I purchased KIJIMA's Filter, which looks great this time!
It's a Glass type that allows you to see inside well and clean it, so it's a commendation!
View detail
FrontCB400TOverhaul
Used on CRM80 FrontCB400TOverhaul. View detail
Nylon meshL shape
There are many types of Fuel filters, but it is difficult and troublesome to know which one to buy at a glance.
I needed an L-shape for handling, but it was a hassle to find an L-shaped Gold genus Filter one, so I went with this one.
View detail
I bought a few different kinds.
I have been using PaperType so far, but I also bought Nylon mesh Type.
Nothing personal, but it is a little more compact, so handling in the vicinity of the carburetor is improved. The resistance is gone, but I am observing whether the Float chamber contains Garbage or not.
View detail
As a carburetor for RepairHose
The carburetor hose was ruined, so I purchased this product to replace it.
The vehicle model is Husqvarna 2016 TE250.
Hose with an inner diameter of 4φ×outer diameter of 7φ and a length of 1m.
Clip×Quantity:2pc. I am glad that it comes with Set.
It is not long enough to replace all of the hoses used on off-road motorcycle carburetors.
In this case, you need to check in advance how many meters you need and look for longer products or buy several of them.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA YZF-R25
I was asked to do it by an acquaintance.
I bought it because a friend of mine's Motorcycle was bent due to a bump.
I bought this one because it is cheaper than OEM.
View detail
Haven't used it yet, but...
I was doing a maintenance check before heading out on a touring trip this spring and...
Several wires on the Lever side of the Clutch Wire are broken!
For a moment, my blood ran cold...even though it's only about 16,000Km...
I immediately ordered a Clutch Wire from the Shop where I bought the vehicle.
It took an unexpectedly long time to arrive.
I'm glad I found it before it happened at home, but if it had been cut off far away...
With that in mind, I bought it as a good-luck charm.
I hope you don't have to be on the show.
View detail
that's all right
Used with EngineWiring protection. It looks better than the Sbiral Tube. I think it is good for engine wiring protection, especially for LargeEngine Displacement Volume Motorcycle with high engine heat. Cost is high and it is difficult to install. View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA Steed VLS Springer NV400CSW, HONDA CB750F, HONDA Bross 400, HONDA Zervis., HONDA Steed 600, HONDA Steed 400 VSE, HONDA Steed 400, HONDA jade, HONDA VRX400 Roadster, HONDA NS-1, HONDA CB125T, HONDA AX-1, HONDA CB600F, HONDA CB600F, HONDA VT250 Spada, HONDA Shadow Phantom 750, HONDA Shadow Slasher 750
It exchanged together at the time of brake lever exchange. I was easy to grasp lever form and thought that texture was also good considering a price. A point regrettable [ one ] has GATA in a pivot part compared with a pure lever. Operation do
It exchanged together at the time of brake lever exchange.
I was easy to grasp lever form and thought that texture was also good considering a price.
A point regrettable [ one ] has GATA in a pivot part compared with a pure lever.
Operation does not seem to be affected.
View detail
Since durability is from now, it cannot say anything, but it is somehow good touch!
Since durability is from now, it cannot say anything, but it is somehow good touch! View detail