Reviews
Fits: YAMAHA BOLT R, YAMAHA BOLT, HONDA REBEL1100, HONDA REBEL250, HONDA REBEL250 ABS, HONDA REBEL500, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC, HONDA Rebel300
If you're not careful, you can dent the Tank.
When the handlebar is pushed all the way to the Right in the open position, it contacts the tank.
I got a dent in my Tank with it.
I removed it because it would have been disastrous if I had inadvertently left it unlocked, although it would have been better if I had not left it unlocked.
View detail
Fits: TRIUMPH BONNEVILLE T100, TRIUMPH StreetTwin, TRIUMPH SCRAMBLER
Grab Rail does not install well if present.
I purchased this for Bon Shrimp Le T100.
The screws for fixing the Grab Rail are not properly inserted because the angle 1 is not adjusted properly when I tried to install it according to the Instruction Manual, and the Large size is not correct when I tried to install it on the Grab Rail side.
In order to attach it to the Grab Rail, a layer of protective Tape would need to be attached, and I am looking into the availability of Tape.
Please let me know if there is a better way to install something.
View detail
Fits: BMW R1200R, BMW R1200RS, BMW R1250R, BMW R1250RS, BMW S1000RR
Easy to install, but not great
BoltQuantity for installation:It is easy to fix with 2pcs, but the Plus screw that fixes the Helmet lock to the base often comes loose.
I had not known that it was necessary to apply screw lubricant, so I had installed it as it was and it went missing.
We have no choice but to use the Quantity:2pc. Purchased and installed Set #2.
View detail
Normal External Helmet lock of
The OEM Helmet lock was so uncomfortable to use (who uses that thing?!?!!) that I had no choice. LOL) I had no choice.
Buy… Well, it's normal use lol I wish they installed this much OEM… Actually.
If you fix the helmet properly while parking the bicycle, it will get scratched (actual experience), so you have to be very careful;
Very disappointed that only 1 pc of spare keys are included.
View detail
Fits: HONDA PCX eHEV, HONDA PCX125, HONDA PCX150, HONDA PCX160, HONDA GROM
I wanted a Helmet holder...
I bought it because the Grom does not have a Helmet holder.
I put it on for the time being, but I was concerned about the fact that when I actually put the helmet on, the helmet hits the tank because it is on the Right Side.
However, I use it because it is better than having no place to write anything.
View detail
difficult to use
I put it on my Gixxer SF250.
I had no choice but to buy this one because the exclusive one was out of stock, but I regretted it very much.
The installation itself was easy, but the screws for installation can only be tightened, and once attached, they cannot be removed.
In actual use, the lock does not lock automatically, and the key must be turned to lock, so the lock must be held in one hand and the key turned with the other hand.
This act became a hassle and the frequency of its use decreased dramatically.
The matte black is good at first, but as you use it, the D Ring of the Helmet hits it and it becomes dirty and scratched.
Once attached, it cannot be easily removed, and the locking process each time is a hassle.
The dedicated products have improved in such areas, so I think it is best to buy those.
One good point is that you can freely choose the angle and location of the attachment.
View detail
For Tandem Footpeg only
It is functional, but can only be used when the OEM Tandem Footpeg is installed.
So it is not available when Single SeatSpec. is used.
If you try to equip a RACINGBracket, you will not be able to use it together……
If I hadn't angled it, it wouldn't have mattered footpeg. I'm not sure if it's a Chinese one, but they sell a shape that can be used with RACINGBracket, so I recommenedation of that one.
View detail
A bit of a shame
The strength and the stability of the installation place are not felt well. As for the feeling of use, because the Inner cover is raised in the Center, Helmet hits easily and is worried about the scratch, it has become Convenient Hook now. View detail
Fits: KTM 1050 ADVENTURE, KTM 1190 ADVENTURE, KTM 1290 SUPER ADVENTURE, KTM 1290 SUPER ADVENTURE
It was impossible to install
This is a 2017 KTM 1290SUPERAdventureS, but PowerParts' Carbon Side Fairing(Ref):Not for installation with Carbon Side Fairing (60303965044) Since there is no helmet holder, you can't install it unless you cut or remove a part of the It's a shame (If your car does not have Carbon Side Fairing, I think you can install it without any problem (The "Mere Old Man View detail
Size did not match
Size did not match J-Cruise of SHOEI and it could not be used.
I was able to use it for OGK's Cam A 2.
Used with helmet that matches Size.
I think that it is a convenient product if you can use it.
View detail
I had trouble with installation Screw.
SEA BASS TF 125 South America Spec. I bought this product in order to attach Helmet holder to the car.
I installed my own Spacer in Rear carrier 's Pipe and installed it, but because I screw the Screw with Slotted screwdriver it is impossible to hook Torque and the installation Screw can not be loosened once tightened to prevent mischief As Screw itself is becoming worried, I made Screw an ordinary hexagon Screw, but since Screw Mountain is cut by Inch, it is difficult to obtain InchScrew, so change to milli For 4. I repaired pilot holes with 2φ and shuffled with M5 Tap. It took me a lot of trouble, but I am satisfied because the texture is good and sturdy making.
View detail
Although correspondence of this product had become to L1, Although a Fender less kit and the Back step were purchased since they were also able to attach the target thing with L2 to K9-L1 .... Because the Muffler became taking out one from L2, attach
Although correspondence of this product had become to L1,
Although a Fender less kit and the Back step were purchased since they were also able to attach the target thing with L2 to K9-L1 .... Because the Muffler became taking out one from
L2, attachment of this product was not completed.
I think that it will be sufficiently satisfying structure if even the
model suits.
View detail
"Although it is GSX-R750, since SS has only a necessary minimum function, there is no helmet lock. (There is also no fuel system ...) Although there is a helmet lock of the clamp type fixed to a round bar, the parts of round bar form themselves are not in
"Although it is GSX-R750, since SS has only a necessary minimum function, there is no helmet lock. (There is also no fuel system ...) Although there is a helmet lock of the clamp type fixed to a round bar, the parts of round bar form themselves are not in GSX-R primarily. This GSX-R1000 was substituted since there was no exclusive one even if I looked for. Since the hole position was separated as I imagined, processing was required. Since I bought it with knowing that, I do not regard this as a minus point. However, on the whole, structure is cheap. In order to avoid interference with a tandem step, the color of an accessory is attached, but this uniqlo plating is very cheap. I cannot understand why it makes color into uniqlo plating although a lock body is black. A color is united there and it should be a black paint! As function, it is enough. It became without worring the place to keep the helmet at the touring point or having a fear of the helmet hooked on the mirror by the strong wind falling down." View detail
In an arai's tour cross, it is hard to use. Lusterless black paint also comes off immediately. Even if a price goes up a little, when a holder part is returned, he wishes coating of the mechanism which acts as Locke automatically, or the portion w
In an arai's tour cross, it is hard to use.
Lusterless black paint also comes off immediately.
Even if a price goes up a little, when a holder part is returned, he wishes coating of the mechanism which acts as Locke automatically, or the portion which is likely to come off.
View detail
If a side bag is attached, it becomes impossible to use, although the helmet lock is attached to the eliminator from the first. It purchased and attached by the reason for saying. I think that it is a place with quite strong sufficient one as a Go
If a side bag is attached, it becomes impossible to use, although the helmet lock is attached to the eliminator from the first.
It purchased and attached by the reason for saying.
I think that it is a place with quite strong sufficient one as a Good point.
Since it is plating, he is smart.
However, in a Bad place, - Locke must turn and be going to just act, also when carrying out as Locke of the key.
- Once it attaches using an attached screw, it becomes impossible to take.
(Although a crime prevention top is a good thing, change of a fixing position, etc. become impossible) - it is somewhat large -- the impression of being was received.
I think that it can make a little smaller.
Although he wanted to attach to a sissy bar, it did not suit in the thickness of the sissy bar.
since -- thickness was adjusted and attached with the elastic band.
It is if it is touch also with a little thinner OK one... Evaluation is a two stars from the above.
View detail
Since the helmet holder is not attached to F650GS (TWIN), it purchases. This product was purchased in order to unite with a black frame. But it is hard to use that it must turn and act as Locke of the key also when acting as Locke just for a momen
Since the helmet holder is not attached to F650GS (TWIN), it purchases.
This product was purchased in order to unite with a black frame.
But it is hard to use that it must turn and act as Locke of the key also when acting as Locke just for a moment.
View detail