Reviews
Fits: YAMAHA BirdCity, YAMAHA Tricity155, YAMAHA BirdCity, YAMAHA Tricity155
It didn't fit.
I bought it because WeBig says it fits New Model from 2023,
Could not install.
I checked KIJIMA's Homepage and it was 2023 - not compliant,
View detail
Key must be inserted and turned when locking.
I bought KIJIMA thinking it would work without any problems.
Using a key to unlock the door is not a problem.
But using a key to lock the door is also a hassle.
And there is a little HANG in the use of the key.
In the end, it was so difficult to use that I hardly used it.
View detail
Fits: TRIUMPH BONNEVILLE T100, TRIUMPH StreetTwin, TRIUMPH SCRAMBLER
I can't install it
Compatible car models at the time of purchase include 16-" I bought it to put on my '16 Flat truckPRO because it was listed as a SCRAMBLER for the '16 Flat truck.
When I looked at the Instruction Manual, I found that there was something wrong. 17y-SCRAMBLER It was written.
Too bad, this is what you get when you buy on the Net.
View detail
Fits: HONDA CB400F, HONDA 400X, HONDA CBR400R, HONDA CBR250R, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB250F, HONDA CB250F
CBR400R 2022MODEL×
CBR400R I searched for 2022 MODEL and found it but I can't install it due to the difference in footpeg shape. 22 MODEL should not be purchased. View detail
Fits: SUZUKI GIXXERSF250, SUZUKI GIXXER250, SUZUKI GIXXER150
You think this is Exclusive Design?
First of all, you can use the adhesive tape that comes with Tandem FootpegBracket.
You have to put it up.
It's a pain in the ass to measure all the way to the length. Just Cut it from the beginning.
In the midsummer in a certain ShoppingSite A Fat Amazon Review
This sticky tape is so sticky that it is useless.
I chose a cool time of day because I read that it was not
Work.
Sticky Tape [Color] Cleared, but here is the Male of Mounting Hardware.
This is the process of inserting the FemaleBracket while turning it.
It's a governor!
Close the screw and fix it (And the Instruction Manual says to use the screw lock agent.
It was stated. Then you should have included it in the package!)
However, even if I close the screw, it is still the governor and there is no way to talk about it.
After this, you can install the KeyBody, but the fixed bracket is not strong enough.
It's slipping away.
If I installed my expensive Helmet in this condition, I'm sure
It's going to slide down and scratch the Helmet!
The Helmet lock made by KIJIMA for old YZF-R25 that I bought a long time ago is
OEM Product? It is not regrettable only because it was the quality that seemed to be.
What did Kijima do to sell this Level as a model specific product?
You're thinking about it?
The Gixxer SF250 can't take Tandem Footpeg, so it's time to get a Bracket.
There was no place to insert the adhesive tape, so I had to use this adhesive tape.
It seems to have been designed, but I can't talk about it.
The design should be redone from scratch or the sale should be stopped.
I tried to remove the adhesive tape because it was useless.
I managed to get rid of the sticky glue by using Parts cleaner.
Removed and finished with WAKO'S Barriers coat.
It was a waste of time and effort, and it was totally annoying.
View detail
SHOEI Full face MicroRatchet's D Ring is hard to hang
It is difficult to hang D Ring of MicroRatchet of SHOEI Full face though I installed it.
It was scratched by dropping Helmet and failing to hang on the nail once.
Since then I have been using Helmet Lock Assist 2 KIJIMA:KIJIMA item number:P00033.
It's surprisingly hard to use and atrocious.
Not with this type of car.
View detail
The applicable year is a lie!
I ordered a BMW S1000XR and I ordered the Helmet lock before delivery, but after delivery I tried to install it, but the Size didn't fit!
The product description said 2015-2020, but that's wrong, it won't fit the 2020's!
Tried to return it but couldn't because it was too far apart from the order date. Give me an accurate product description!
View detail
Fits: BMW F650, BMW F700GS, BMW F800GS, BMW F700GS, BMW F800GS
Can not be installed - -
Although it may be only the 2017 MODEL, it interfered with the wire harness and it was impossible to attach at all. Package also opened, so I can not return it. Unfortunately it was disposed of as incombustible.
I wonder if the car at the end of MODEL is confirmed conforming. It was very disappointing..
View detail
Fits: BMW F650, BMW F700GS, BMW F800GS, BMW F700GS, BMW F800GS
Can not be installed - -
Although it may be a problem unique to MODEL in 2017, it could not fit any way by interfering with the car body side Cable.
It was disappointing though things were good.
View detail
The mounting position covers the Tandem bar
Benchura's Tandem bar (For TouringBack installation) I decided to install it under the bar with the mounting position wearing.
It looks very bad so I will change it to another and throw it away.
If you are not attaching anything, it may be good as it seems to be attached to SMART.
I think that it has done not wastefully buying if the installation position is described in more detail.
By the way, the Seat frame of the installation position is the Screw hole which has two front and rear on the Left side of the true reverse side of the Tandem seat.
View detail
Not available.
After attaching to Arai's ASTRO-IQ, the gold tool hit Moro at Nodobotke, it gave me a lot of pain, so I gave up using it.
Even in a light fall accident, I think that I will do Nodobotoke if a force is applied from the front.
This can not be used.
View detail
Since it is exclusive use, to be sure, it is just fit, but since a helmet will contact a hot muffler if it uses, it cannot use after all but has become free decoration. Since it is fairly heavy, it is due to remove soon.
Since it is exclusive use, to be sure, it is just fit, but since a helmet will contact a hot muffler if it uses, it cannot use after all but has become free decoration.
Since it is fairly heavy, it is due to remove soon.
View detail