Reviews
It is an essential item.
Required to attach Side Back
Quantity:Pair (for Left and Right) In Quantity:1 Set, so it was good.
It was easy to install and I'm glad I bought it.
View detail
Opening and closing switches is inconvenient.
[How is it used?
We used to use their 30L but changed to 50L due to insufficient capacity.
Was the one you received as per Image?
Yes
How was your experience with it?
The capacity has increased dramatically, and with Helmet's Size XL, the Quantity:2pc. Set" is not included, but "Small size" is included.
[Points to note]
Unlike the 30L, the open/close Button is quirky, and the lifting type, not the push type, raises concerns about durability.
How did it compare to other products?
As for the manufacturing, it is not waterproof, so it may be a good idea to modify screw holes and the like.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CROSSCUB110
Left Only installed.
KIJIMA's Exclusive Design so it could be pontooned.
Good for putting on weight back though,
Bracket may be a little too large for SmallBack.
View detail
Used for YAMAHA BOLT Shoulder Bag (2022)
Bag Rail is also made by KIJIMA.
I wish the distance from the suspension was a little closer, although it is unavoidable for safety reasons. Also, the back of the Bag hits the apex of the Support's Curve section and does not hit it straight, so it is slightly slanted, and the Mounting Bolt should have been Black.
I have written a lot of complaints, but it is a good product at a reasonable price.
View detail
Fits: TRIUMPH Bonneville bobber, TRIUMPH Bonneville Bobber Black
KIJIMA is a reliable manufacturer.
Although there is always a concern that products from overseas PartsManufacturers may have problems,
I knew that KIJIMA, a Japan-based company, had no problems at all with their products.
It is very reliable.
View detail
Same product, but with K-MAX K-25.
[How is it used?
I am using it on KIJIMARear Carrier Black 210-239.
I purchased this product because it is an OEM product, although it is not handled by KIJIMA. (It is slightly less expensive than KIJIMA's products.)
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
The quality is commensurate with the price, but there is nothing wrong with it. The key does not come out unless it is locked, and there is no rattling because it fits tightly in the base. The design is not bad looking, so I think this is an excellent cosmetic product.
[Points to note]
Nothing special, but the Sticker on the top of the lid was warped and peeling off. I peeled it off, so there is no problem, but I guess this is also appropriate for the price.
How did it compare to other products?
Since this was the first Top case we installed, we compared it with GIVI and SHAD while being concerned about the loading weight and capacity, etc. This product was by far the most cost-effective and was an almost instant decision.
[Points and hangs of installation/Items to buy together].
The screws that come with the product can be used for installation, but it is advisable not to over-tighten the screws when securing the base part. If you tighten it too much, the hole in the base may be damaged.
The Inner Sponge is attached, but only at the bottom, so I purchased the Inner separately from Universal Product and attached it. (Inner for WorldWalk FourColorsLens Rear box 30L)
It is up to each person, but I think it looks different without it. (If it were a little more Large, it would be more "Exactly".)
View detail
Available in Bag RailSingle Item
[How is it used?
As stated in the instruction manual, this product is designed to be used with Bag Support, which is sold separately.
But what I wanted to do was not to add a big Saddle Bag, I just wanted something that could be used like a Grab Bar to make it easier to load the Rear.
Therefore, we do not purchase Bag Support and use it as a Single Item.
Was the one you received as per Image?
The stick came as per Image.
Was the installation difficult?
Very easy. Even a child could work on it.
How was your experience with it?
It is very good, although it is used for other purposes from KIJIMA's point of view, because it is well made.
[Included Parts:were they on?
Yes.
[Was there anything that disappointed you?
No, there is not.
Point and hang of installation
I would just remove and replace OEM Product.
In my case, I do not use Bag Support, so the M8x75 supplied with the product is not long enough to hold the Bag RailBody in place (the OEMBolt is not long enough).
I think it is a good idea to have one, but it needs to be fixed by adding a spacer.
I was rifling through my toolbox to see if I could find anything good, and I found Nproject's Waist Color Set for M8 Found the
This was just a bingo.
[ITEMS TO BUY TOGETHER
If you want to fix a Tool Bag to this thing! If you are thinking "I want to fix my Tool Bag to this thing!
Helmet Lock Relocation Bracket would be available for OEM Helmet locks if purchased.
View detail
It was very easy to install.
Large Size was the right choice, more compact than expected. View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA SUPER CUB110
Entrapment prevention
The product itself is neither good nor bad.
I bought the side bag because of its low price compared to other products.
It is a good product for those who install it.
View detail
Needed for Side bag
I installed Left Only, Right Only Exhaust System, so I don't feel any discomfort. View detail
I installed it on a c125.
Purchased because I want to install a Saddle Bag.
I think it is good because it is easy to install and eliminates the worry of entrapment.
View detail
Impressions after 1.5 years of use
I used it for a year and a half across Motorcycle.
It used to be a 40-liter box from MotorcyclePartsCenter.
Helmet, Rain Coat, Rain Gloves, and Towel.
I bought a larger size because it was pretty much at the very end of the length.
The deciding factors in choosing this one over others were, in order, price, Brand, and Design.
As you can see from the image, 10Liter changes quite a bit.
The capacity is Large satisfactory and I am satisfied with the quality.
I am satisfied with the durability of the product as it has been used for a year and a half and has not rattled.
Not so much a bad place.
I preferred the hex bolt for fixing the base to the Phillips screwdriver. (It is fixed properly as a result.) ・Base fixing was better with Allen bolt than Phillips screwdriver.
At first the key was reluctant to move. After I sprayed lubricant on the keyhole, there is no problem at all.
I don't need a luggage holder. I cut it off because I don't use it.
Installation is simple and can be thought of as the same as the GIVIMono-lockSystem.
If I have to buy a box next time, I will buy one made by KIJIMA again. It was a good purchase.
View detail
The 50LiterBox is a great introductory box.
To match the installed Monokey base
I thought about using GIVIOEM, but the frequency of use, the cost, and the price were too high.
Also, this is my first time using the Large Threshold Box, so I chose this one to see how it works.
I was able to install it on the Monokey base as informed.
Once, I got burned, but the Wound was not broken and the Base was safe.
It also came with a Base, but it didn't look as good as the one that looks more universal.
View detail
Options other than Plating
I bought this because I wanted to use a Saddle Bag.
1pc for the time being. I'm planning to use Quantity for One Side anyway.:Pair (for Left and Right) You'll want it, and it's a better value than One Side, so Quantity:Pair (for Left and Right) selection
We chose black paint instead of plating because we did not want the carriers to stand out.
Installation is done together with the rear carrier and the upper part of the rear shock. Rear side cap boltQuantity:Replace the 2pc with the supplied one, and reuse the OEM Cap Nut on the front side, but fix it without using the OEM Washer because it will reduce the screw engagement.
When tightening the upper side of the rear shock, it is best to stand the motorcycle on the Side Stand and straddle the seat in the opposite direction so that the proper load is applied.
The installation itself is Kan Tan, but requires some prep work on Torque wrench and designated Torque, so I give it 3 stars.
Even without the bag, it is black and has no extra reinforcement, so it is not noticeable and refreshing.
Henry beguine's 13L (Vertical) The width of the Bag was too narrow to be inserted in combination with the It can be used with a string.
View detail
Satisfied with the product and the delivery!
Product according to my order. English assembly instructions would be welcome! Tightening to be checked in a few kilometers. Express delivery by FedEx! Very satisfied. View detail
Fits: HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1000 SPORTSTER 1000, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily
Simple, durable and good looking.
This is a mounting bar for Side Back of Eliminator.
Quantity:Pair (for Left and Right) Necessary to install a stand-alone Tank Bag.
It is a simple, good-looking, easy-to-install product that can be slid to correspond to the position of the belt, and the fixing method is one Bolt hole, and the other is the method that straddles the Bolt.
It has a black coating but is very strong.
The only thing that came loose was the nut on the end and I lost it and had to replace it, but it is a good product.
View detail
No worries even on the most intense days
I've got a Ninja 650 with a small load capacity and a seat bag that I can use.
The load is not enough for overnight touring.
I have a Side bag, but it's not stable with today's Full Cowl because the Tail is Smaller.
Kijima's Bag Support for the Ninja 650 is now available, so order now!
Installation itself is very easy.
Just remove the grommet from the OEM Top case or SoftPannier Mounting Bracket, insert the supplied collar and tighten the bolt.
The only problem is that the RearInner cowl is not properly aligned and I had to grind it to enlarge the hole, so it took a while.
It usually takes 15 minutes to install.
All you need is a slotted screwdriver to remove the Grommet and a HexaWrench 4 or 5mm?
Also, if you have a screw locker, it's safe.
It is installed in the MultiFitSide bagM of TANAX.
I'm pulling it downward, so it's inevitably pulled towards the Tire side.
Thanks to Support, it never goes inside and is stable even at 400km driving test.
View detail
Fits: HARLEY-DAVIDSON Universal
This is what Universal is all about.
You can adjust the distance between the bolt holes with the slide type. It is convenient to fit almost any car models within the corresponding value.
The bag can be removed by simply loosening the bolt and lifting up one side.
You can also use it as a Loading Hook when you put your luggage on the Seat.
The tip of the Rail is bent downward, and a square Loop is attached to the other end so that you can thread or hook a string.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB 50
For improving the load capacity of camping touring
I bought it to install a side bag and installed it.
This is so that you can load up a lot of gear when camping touring.
It can be used in a universal way, so I was able to install a side bag made by other companies with a little ingenuity.
The bag will not get caught in the rear wheels, so you can safely load it.
The Frame's thickness, which seems to be quite durable, makes it reasonably heavy, but not so heavy that it becomes heavy to handle.
View detail
Fits: HARLEY-DAVIDSON XL1200C SPORTSTER 1200 Forty-Eight Sportster Forty-Eight XLX, HARLEY-DAVIDSON XL1200C SPORTSTER 1200Seventy-Two Sportster Seventy-Two XLV, HARLEY-DAVIDSON XL883R100 ROADSTER 883 Roadster XLR, HARLEY-DAVIDSON XL883R100 ROADSTER 883 Roadster EFI XLR, HARLEY-DAVIDSON XL883 Low 883 Low EFI XLL, HARLEY-DAVIDSON XL883 Low 883 Low XLL, HARLEY-DAVIDSON XL883SUPER Low 883 SuperLow XLL, HARLEY-DAVIDSON XL883Custom 883 Custom EFI XLC, HARLEY-DAVIDSON XL883Custom 883 Custom XLC, HARLEY-DAVIDSON XL883Iron Iron 883 XLN, HARLEY-DAVIDSON XL883 883 XL, HARLEY-DAVIDSON XL1200C SPORTSTER 1200R100 ROADSTER 1200 Roadster XLR, HARLEY-DAVIDSON XL883 883 EFI XL, HARLEY-DAVIDSON XL1200C SPORTSTER 1200 Low 1200 Low EFI XLL, HARLEY-DAVIDSON XL1200C SPORTSTER 1200NIGHTSTER 1200 Nightster XLN, HARLEY-DAVIDSON XL1200C SPORTSTER 1200SUPER Low SuperLow 1200 XLT, HARLEY-DAVIDSON XL1200C SPORTSTER 1200Custom 1200 Custom XLC, HARLEY-DAVIDSON XL1200C SPORTSTER 1200Custom 1200 Custom EFI XLC, HARLEY-DAVIDSON XL1200C SPORTSTER 1200 50 Sportster 1200 XL 50, HARLEY-DAVIDSON XL1200C SPORTSTER 1200 Low 1200 Low XLL
It comes with a clean Side Back.
I'm very happy with this product. View detail