Reviews
Bag Support
Used as support for DEGNER's Waterproof Bag during touring View detail
Fits: HARLEY-DAVIDSON XL1200, HARLEY-DAVIDSON XL883
Am I putting it on the wrong way?
Installed on an XL883N (2019). The Bolt on the back side of the bike is threaded on the Fender side, so it is easy to loosen and install, but on the front side, it is nutted. Therefore, it is not possible to remove the Bolt by simply loosening the Bolt and sliding it off. In addition, it is not possible to leave a space of about 5mm between the attached cylinder-like part and the loosened Bolt (Bolt is not long enough?). (Bolt is not long enough). The longer cylindrical part is not used and is fixed in place.
I don't know if it is a problem with my installation/motorcycle or the product.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE
To install Tool Bag
I purchased this to install a small side bag or tool bag. I purchased this bar because the existing Pillion Bar was also made by KIJIMA. The color, texture, and pipe diameter are the same, so there is no discrepancy. I didn't really want to install it, but I didn't feel comfortable using only standard tools. View detail
Not bad
Do you have enough Screw Mounts when used with Helmet holder?
I'm worried about that, but I'll run it anyway and if it doesn't work, I'll remove it.
View detail
Fits: KAWASAKI Z250, KAWASAKI Z400, KAWASAKI Ninja250, KAWASAKI Ninja400
Processing required
It does not fit the 2014NINJA. Sorry, but I'm in the process of returning it. View detail
CRF250L (MD44) attached to
MD44 is not listed as a compatible model, but I was able to install it somehow
Blinker and Limit will interfere with each other, so if you're worried about it, you can go to the other Blinker
You may want to replace it
It can be installed in combination with the company's Rear Carrier, but it is quite tight
I don't really want to do things like put it on and off for some kind of maintenance in the future
You may need to remove the helmet holder to install it
It's held in place with a special Bolt, so you'll have a hard time removing it
In my case, I managed to turn the Bolt by pushing it with a T25 Torx bit
The other caveat is that it will be poorly maintained afterwards
Particularly when replacing a light bulb due to a broken light bulb in the tail lamp, it is quite a tedious task
The tail lamp has to be durable such as LED because it seems to be
It looks like you should replace it
View detail
Fits: HARLEY-DAVIDSON FXDBA DYNA STREETBOB LIMITED
Good quality, but subtle
I bought this for my 2017 FXDBStreet Bob
I think you're looking at the safety factor, but the Side Back is too far away from the body of the car
I cut and welded it again once to bring it closer to the body of the car, because I wanted to bring it closer to the body of the car as much as possible
The mounting accuracy is good, but the 6 square Screw is no good
The reason is that the hexagonal screw is 5.5mm, which is the same as Japan's standard hexagonal Screw is 6mm after 5mm
It's only 0.5mm, but 5mm won't turn it and 6mm won't go into the hole
I went to a lot of home centers, but I couldn't find it anywhere, I looked for it on the Net and finally bought it I could
5.If you're going to use a special 5mm hexagon, you should get a wrench attached to it, even if it's a little expensive I think so
Is there a similar request from a buyer of the same product?
View detail
BackRail installed in YamahaBolt
Quantity BackRail : Pair (for Left and Right) Purchase
With Back support and Set, Included Parts : It can not be installed by itself
Left Side purchases Back support and plans to install with Set
Right Side caught Nut and installed it.
Usability, looks are nice.
View detail
Fits: KAWASAKI VULCAN800, KAWASAKI VULCAN800 CLASSIC, KAWASAKI VULCAN900 CLASSIC400, KAWASAKI VULCAN400
It is exactly OEM attached to DJEBEL 250 XC
Watch Impre and buy to DJEBEL. Everyone, using Color or something, it seems to be diversion mounted, but if you do it in the same way it will rise considerably - - - I'm something illegitimate so I've processed it and installed it.
In the first place Carrier of DJEBEL 250 XC is installed using Spacer. However, since the thickness of the Spacer and Support mounting part is 1 or 2 different, cut the side of the Spacer of the OEM Carrier 1 to 2 mm.
After that you need to bend A littleSupport, but as you can see, you can install it with OEM style.
I do not need to purchase Color or any additional parts at all.
However, since the tool BOX will not be installed, it is necessary to remove it.
There is no loading tool, but since we are loading Garber's Multi Tool in Motorcycle, there is no problem in any chance.
The angle with the Side cover is also exactly OEM.
View detail
A lug of an internal bottom is unknown in for what purpose it is. A size is merely as expected.Although what is necessary is to be able to use the rest only when a lock with a key is required.The Base of attachment and the position of a hole do not su
A lug of an internal bottom is unknown in for what purpose it is.
A size is merely as expected.Although what is necessary is to be able to use the rest only when a lock with a key is required.The Base of attachment and the position of a hole do not suit the Carrier of the
DAYTONA.
View detail
In order for two held vehicles to share a Rear box, it purchased by the addition. With the photograph, a drilling process is carried out to Y's Gear multi-carrier II, a Base is attached, and it has attached to CRM250R. I think that it is cheap
In order for two held vehicles to share a Rear box, it purchased by the addition.
With the
photograph, a drilling process is carried out to Y's Gear multi-carrier II, a Base is attached, and it has attached to CRM250R.
I think that it is cheaper than the Base set of a Manufacturer besides
, and there is no loss even if he buys it when two or more vehicles are owned.
View detail
a front side -- the fixed Nut of a Rear suspension -- a Tandem bar -- since the Plate to fix has thickness considerably although a bundle is carried out, if it does not take care, does a Nut separate? a Screw lock is applied -- as -- although written ...
a front side -- the fixed Nut of a Rear suspension -- a Tandem bar -- since the Plate to fix has thickness considerably although a bundle is carried out, if it does not take care, does a Nut separate? a Screw lock is applied -- as -- although written ... View detail