Reviews
Good visibility
It is easy to see and use even during the day. It is also good that USB can be used for power supply. View detail
Fits: KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4RR, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R
Good vibes
I thought it would be more rugged.
It's not so bad.
View detail
Fits: KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Ninja 1000SX
For Smartphone Holder installation
I bought it for Navigation and Smartphone Holder installation. View detail
Screen is very easy to read
If a USB Socket is attached to the Handlebar, it can be easily connected. View detail
Fits: HONDA Super Cub 110 Pro, HONDA Super Cub 50, HONDA Cross Cub 50, HONDA cross-cub 110
Mount bar for CROSS CUB
I found this product when I was looking for a mount bar to attach additional meters.
Since the installation was requested by the Shop, the details of the installation method are unknown, but it appeared that the Meter panel was removed and this product was co-tightened using the included Bolt.
The bar is now in a position that is very easy to see when driving.
Attached to the bar is an iPRO ShiftIndicatorAPH8 Red ・ SP MukawaΦ48Small DN Tachometer 12500rpm (with Rev indicator) ・ NeoFACTORY48mm Voltage Meter White Panel Stainless
When installed at the same time as the KITACO Neck Cover, modification is required for either one of them due to interference. (Modification of the Neck Cover is recommended.)
View detail
OEM Parts.
The battery was bulging due to age-related deterioration.
Refurbished to new replacementBattery.
It can be used without any problem.
View detail
It was also available in TANAXSMARTRideMonitor!
I was worried that it would not attach well because it was said to be compatible with KIJIMA AD720, 1080J, Mistuba, and Sankowa EDR-11, 21, and 21G cameras, but I bought it for TANAX SMARTRideMonitorAIO-5Lite's RearCamera. I was able to install it without any modification.
The Bracket itself is thick, so it seemed solid and hard to shake.
It is a Recommendation because it can be installed Refreshing without Camera's pedestal.
View detail
good
This is a very satisfying product. Kijima is a brand you can trust and purchase. I have several Kijima parts on my motorcycle, but this is my favorite. Thanks to the seller.. View detail
This is a must.
Product Name
KIJIMA KIJIMA Handlebar Mount Bracket
Item Number
204-0683
Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020
Number of man-hours
5 minutes
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
Because it looks Stylish.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
It's easy, just remove two Screws.
How was your experience with it?
I think it is easy to use and visible.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Very Good !! Best!
Very Good !! Best! or Speed Get Thank you View detail
Good Handlebar
very Good Item! Be sure to focus your comments on the product. We do not accept your post if you use same alphabet, number, or mark over 3 characters in a row. We would delete the images if you post the unrelated images to the products or motorcycles, or you post the images that do not meet a requirement of the below. Then we evaluate your post as text. HTML tags are not allowed. Reviews require prior approval before they will be displayed View detail
Very fast good good
Domestic shipping rate, quality is good, I will use it well ----------------------------------------- ----------------- Domestic delivery salary quality is also good. Powered by Google Translator View detail
Installation
I purchased this as an Antenna Bracket for ETC.
At first, it seemed difficult to adjust the angle, but I tightened (the Screw that connects the top and bottom) to some extent,
It is easy to fine-tune and tighten.
Double-sided tape is also included, so no worries.
I put it on my NSER250R SE MC28, but I was not sure where to put it, and in the end I fixed it at the center above where the card key is inserted, where the cables are not damaged (with double-sided tape).
I purchased Silver and it is attached without any discomfort.
View detail
Fits: YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA Tricity155
Mount bar for easy eye movement on Meter
Installed on a BirdCity155 2023.
This product allows 22.2mm bars to be added on the Meter and is compatible with Long Screen made by Y's Gear as well as OEMScreen.
Other products were available that use Mirror and are added in front of the Handlebar, but we chose this one because of the ease of eye movement when a smartphone or additional meter is installed in place of Navigation.
If you want to install something that is not relevant during the ride, such as a PET Bottle Holder, you should purchase a product that uses Mirror for installation instead of this product.
The installation procedure is simply to remove the OEMScreen and Bolt On. There is no gap in the hole position, and it was easy to install.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZX-14R
There was no other choice.
I bought one that fixes to the central axis, but I was somewhat dissatisfied with it, so I bought this one again.
It is mounted firmly, so there is a sense of security.
View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Easy to install and does not affect Handlebar
Since it is a SUPER BOLDOR, we did not want to attach various things to the Handlebar, so we chose the Type Multi Bar to be attached to the Cowl.
Installation on 2BL-NC42, but can be installed with Exactly.
When I first saw it, I was worried that the holes would not engage, but after stopping and adjusting the One Side, I was able to find a Point that just fit, and it is securely attached.
I thought that the installation might produce Chatter, but the impression is that it actually increases rigidity.
Currently I have a Smartphone Holder (with charging function) and a 3Inch DriveRecorder.
This is the full width, but there is room for a bar, so those who shoot video, etc. could attach a Camera Pole or other device here. However, it may be difficult to extend the Pole directly above the standard Screen due to the angle.
I have changed to Zero Gravity's Sports Touring Screen so I have a little more room.
By having the Smartphone just at the same position as the Mirror, there will be less eye movement, which will allow for safer driving. Also, since the Handlebar area is not heavy, the Merit is that it does not affect the light Handlebar operation that is a feature of SUPER BOLDOR.
My one complaint is that the Screw is a little hard to close, I wish it was HX4 or 5 instead of HX3.
View detail
Universal Product. Slightly processed
Since this is a Universal Product, some ingenuity is required.
There is a problem with the angle of the camera, but it can be bent and modified to fit nicely.
View detail
Fits: TRIUMPH Bonneville bobber, TRIUMPH Bonneville Bobber Black
Out of stock and hard to get.
I made a DIY bracket at Home center, but it was out of stock and hard to find;
I thought that a product made by a proper manufacturer would be better and more firmly fixed.
And the price isn't much different if you make it as a DIY project.
Considering the time it takes to select and buy parts, I would recommend buying here.
View detail
It fits well
Exactly to Gixxer SF because it is vehicle specific. the drarreco is from DAYTONA so it is a non-compatible combination so I put it on at my own risk. View detail
Is good
The leather case of the ETC is cool looking because of the high quality of the leather.
It protects the ETCBody from the rain, and the quality of the leather is very good and well made.
It has a custom look and fits Motorcycle well.
View detail