Reviews
Used for Radar installation
It is necessary to remove the Mirror until the Meter is removed.
I thought it would be easy, but it was more complicated than I thought.
View detail
cc110 smart phone device
It is integrated with the windshield.
Good safety features as it is in an easy-to-see position.
View detail
fast in delivery
It arrived quickly. I'm glad I didn't have to deal with the cold. View detail
KIJIMA Handlebar Mount Bracke
I can use a small space efficienctly. I modified the Rixen Kaul adapter, combined it, and put on some kind of bicycle handle bag. View detail
Good to use with Windshield.
[How is it used?
SUPER CUB110 has a Handlebar covered by a Cover, so a Smartphone Holderretc. cannot be attached as it is, so it is used to make a place for the Handlebar.
(I guess you could put it on Mirror if you don't use Windshield)
Was the one you received as per Image?
The color and texture are as per Image. I thought it was quite heavy, but it is better than chubby.
Was the installation difficult?
Before installation, it was necessary to remove the body of the WindshieldCUB-F3, which was already attached to the Motorcycle. Also, the four screws originally attached to the Motorcycle were tightened so tightly that it was a little difficult to remove them. I bought my Motorcycle only four months ago, so it might be better.
When I first installed it, there was almost no gap between the lower part of the Windshield and the Shield (see the first photo), and I was worried that if I drove with the Shield in place, there would be contact between the two on bumps and noise would be heard. After changing the position of the Bolt and Bracket of the Shield, I was able to open a gap where there is no contact and there is no noise.
How was your experience with it?
The KaEdia KDR-M28 Smartphone Holder is attached. The thickness of the bar is 22.2mm, and the clamp of KaEdia is 22.0mm (when Attachment is attached), but I was able to attach it.
I used it for about a week and went touring twice during that time, about 2 hours each way, and had no problems with it coming loose.
[Included Parts:were they on?
You need to prepare your own tool to tighten the Hexagon Bolt. I used the one that came with the for Motorcycle portable tool.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Nothing in particular, since I wrote most of it above. If I had to say something, I would say that the price is too high for a Mount Bar Bracket, but I don't want the quality to be lowered, so maybe this is okay.
View detail
It is an essential item.
Required to attach Side Back
Quantity:Pair (for Left and Right) In Quantity:1 Set, so it was good.
It was easy to install and I'm glad I bought it.
View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Ideal for BOLDOR
CB400SB (2014) Unlike the Handlebar and Handlebar Brace, it is positioned above the Meter, which makes eye movement easier. The texture is firm and the paint job is satisfactory. The only caveat is that the Cowl mirror must be removed before installing the monitor. View detail
Fits: HONDA CBR1000RR, HONDA CBR1000R, HONDA CBR1000R
For Attachment installation
I installed it for a phone mount and USB power supply.
I have no complaints about the Size feel or shape, but the texture of the product was a bit cheesier than I had expected.
The SC77 has a beautiful OEM handlebar area, so it is a little disappointing that it is hidden from view.
Considering the price, it is totally acceptable, and the purpose itself is accomplished, so I would give it 4 stars overall.
View detail
Easy installation
It took less than 10 minutes to install. The texture matches the vehicle and does not look out of place.
I installed the Phone Holder and drove with the phone attached and had no problems with no Wobble.
View detail
Opening and closing switches is inconvenient.
[How is it used?
We used to use their 30L but changed to 50L due to insufficient capacity.
Was the one you received as per Image?
Yes
How was your experience with it?
The capacity has increased dramatically, and with Helmet's Size XL, the Quantity:2pc. Set" is not included, but "Small size" is included.
[Points to note]
Unlike the 30L, the open/close Button is quirky, and the lifting type, not the push type, raises concerns about durability.
How did it compare to other products?
As for the manufacturing, it is not waterproof, so it may be a good idea to modify screw holes and the like.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA CROSSCUB110
Left Only installed.
KIJIMA's Exclusive Design so it could be pontooned.
Good for putting on weight back though,
Bracket may be a little too large for SmallBack.
View detail
Easy installation
The main function of this product is to support the rear back, but it can also be used as a hook for hanging cargo, which is very convenient.
Installation is easy, as all that is required is to remove two existing Bolts.
The quality of the product itself is not bad… but the welding marks are a little noticeable, although they are not visible… I would like to believe that there is no problem with durability, but at this point I can't say for sure.
View detail
Very happy rider
I got this to mount Ottocast C5 carplay screen. Space is great so you can mount other things. Instructions were ok and had to spend sometime assembling. View detail
Prank Measures
We began considering the introduction of Alarm after a vehicle we know was recently damaged by Prank.
In my case, I want to use it as a countermeasure against parking on the go, and in introducing it, I can easily Quantity:I chose this product because I wanted to be able to set it up. This is because, although I don't have to worry about it when I am alone, I wanted to avoid having to set it up when I go touring with my friends and have lunch with them.
In terms of price, the Brake Disc has a Quantity:The Type to be set is cheap and does not require installation work, so it is easy and good in that sense, but the Type that is installed at the time of use is not the same as the Type that is installed at each use of the Quantity:Neck was that it takes time to Set. This product requires installation work, such as constant power supply, but when in use, a single button on the REMOTE CONTROLLER can be used to set the Quantity:I can set it, so it fits my usage scenario.
The installation was not so difficult, and it took only about 1 hour for the Coupler to work. In my case, the power acquisition line of DAYTONA's D-UNIT is connected to Battery, so I installed Coupler on the way of its wiring, and installed a branch line to Coupler on the lower side to acquire the power supply of Alarm. Furthermore, when I leave it at home, I don't use Alarm, so I don't want it to mishandle the Quantity:I installed a switch on the Plus side of the wire just to be sure that I would not set it and raise the battery. I was concerned that the wiring of the power supply was too thin and weak.
Once the power supply is connected, the product is ready for operation, so test the operation by operating the REMOTE CONTROLLER.
The sensitivity can be set to strong, medium, or weak depending on how the wiring from the body is connected, and the default setting is medium. I tested with the default setting, but in my installation environment, the Alarm sounded when I started to push the vehicle, so I changed the sensitivity to high. In the strong setting, the alarm is activated by lightly tapping the Handlebar, so I think this is probably a good level.
I haven't gone Touring yet, but it looks like I can use it as per Image, and while I would prefer that Alarm never comes into play, it will allow me to park with peace of mind when I am on the road.
View detail
Used for YAMAHA BOLT Shoulder Bag (2022)
Bag Rail is also made by KIJIMA.
I wish the distance from the suspension was a little closer, although it is unavoidable for safety reasons. Also, the back of the Bag hits the apex of the Support's Curve section and does not hit it straight, so it is slightly slanted, and the Mounting Bolt should have been Black.
I have written a lot of complaints, but it is a good product at a reasonable price.
View detail
Fits: TRIUMPH Bonneville bobber, TRIUMPH Bonneville Bobber Black
KIJIMA is a reliable manufacturer.
Although there is always a concern that products from overseas PartsManufacturers may have problems,
I knew that KIJIMA, a Japan-based company, had no problems at all with their products.
It is very reliable.
View detail
Same product, but with K-MAX K-25.
[How is it used?
I am using it on KIJIMARear Carrier Black 210-239.
I purchased this product because it is an OEM product, although it is not handled by KIJIMA. (It is slightly less expensive than KIJIMA's products.)
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
The quality is commensurate with the price, but there is nothing wrong with it. The key does not come out unless it is locked, and there is no rattling because it fits tightly in the base. The design is not bad looking, so I think this is an excellent cosmetic product.
[Points to note]
Nothing special, but the Sticker on the top of the lid was warped and peeling off. I peeled it off, so there is no problem, but I guess this is also appropriate for the price.
How did it compare to other products?
Since this was the first Top case we installed, we compared it with GIVI and SHAD while being concerned about the loading weight and capacity, etc. This product was by far the most cost-effective and was an almost instant decision.
[Points and hangs of installation/Items to buy together].
The screws that come with the product can be used for installation, but it is advisable not to over-tighten the screws when securing the base part. If you tighten it too much, the hole in the base may be damaged.
The Inner Sponge is attached, but only at the bottom, so I purchased the Inner separately from Universal Product and attached it. (Inner for WorldWalk FourColorsLens Rear box 30L)
It is up to each person, but I think it looks different without it. (If it were a little more Large, it would be more "Exactly".)
View detail
Available in Bag RailSingle Item
[How is it used?
As stated in the instruction manual, this product is designed to be used with Bag Support, which is sold separately.
But what I wanted to do was not to add a big Saddle Bag, I just wanted something that could be used like a Grab Bar to make it easier to load the Rear.
Therefore, we do not purchase Bag Support and use it as a Single Item.
Was the one you received as per Image?
The stick came as per Image.
Was the installation difficult?
Very easy. Even a child could work on it.
How was your experience with it?
It is very good, although it is used for other purposes from KIJIMA's point of view, because it is well made.
[Included Parts:were they on?
Yes.
[Was there anything that disappointed you?
No, there is not.
Point and hang of installation
I would just remove and replace OEM Product.
In my case, I do not use Bag Support, so the M8x75 supplied with the product is not long enough to hold the Bag RailBody in place (the OEMBolt is not long enough).
I think it is a good idea to have one, but it needs to be fixed by adding a spacer.
I was rifling through my toolbox to see if I could find anything good, and I found Nproject's Waist Color Set for M8 Found the
This was just a bingo.
[ITEMS TO BUY TOGETHER
If you want to fix a Tool Bag to this thing! If you are thinking "I want to fix my Tool Bag to this thing!
Helmet Lock Relocation Bracket would be available for OEM Helmet locks if purchased.
View detail
DAYTONAMiVue has been installed on a Ninja 1000.
It is designed for Ninja 1000SX, but I bought it because I heard from an impresario that someone with the same model (Ninja 1000) as me was able to install it.
What was a bit of a gamble was the product description. "MITSUBA Made in KIJIMA. DAYTONA (MiVue), because it was said to be a driver's record... (R) (M760D) can be installed? (It was installed by a Motorcycle shop)! (It was a Motorcycle shop that installed it for me.)
There is no interference when folding the Mirror or adjusting the height of the Screen. The car stops firmly without any vibration when driving.
View detail
It was very easy to install.
Large Size was the right choice, more compact than expected. View detail